DataSheet.jp

FXO-HC73 の電気的特性と機能

FXO-HC73のメーカーはFox Electronicsです、この部品の機能は「HCMOS 7 x 5mm 3.3V Oscillator」です。


製品の詳細 ( Datasheet PDF )

部品番号 FXO-HC73
部品説明 HCMOS 7 x 5mm 3.3V Oscillator
メーカ Fox Electronics
ロゴ Fox Electronics ロゴ 




このページの下部にプレビューとFXO-HC73ダウンロード(pdfファイル)リンクがあります。

Total 14 pages

No Preview Available !

FXO-HC73 Datasheet, FXO-HC73 PDF,ピン配置, 機能
HCMOS 7 x 5mm 3.3V Oscillator
Features
Model: FXO-HC73 SERIES
Freq: 0.75 MHz to 250MHz
Rev. 11/28/2007
XTREMELY Low Jitter
Low Cost
XPRESS Delivery
Frequency Resolution to six decimal places
Stabilities to ± 20 PPM
-20 to +70°C or -40 to +85°C operating temperatures
Tri-State Enable / Disable Feature
Industry Standard Package, Footprint & Pin-Out
Fully RoHS compliant
Gold over Nickel Termination Finish
Serial ID with Comprehensive Traceability
VDD Enable / Disable
FOX
X PRESSO
ASICs
OUTPUT
Applications
ANY application requiring an oscillator
SONET
Ethernet
Storage Area Network
Broadband Access
Microprocessors / DSP / FPGA
Industrial Controllers
Test and Measurement Equipment
Fiber Channel
GND
For more information -- Click on the drawing
Description
The Fox XPRESSO Crystal Oscillator is a
breakthrough in configurable Frequency Control
Solutions. XPRESSO utilizes a family of
proprietary ASICs, designed and developed by
Fox, with a key focus on noise reduction
technologies.
The 3rd order Delta Sigma Modulator reduces
noise to the levels that are comparable to
traditional Bulk Quartz and SAW oscillators.
The ASICs family has ability to select the output
type, input voltages, and temperature
performance features.
With the XPRESS lead-time, low cost, low noise,
wide frequency range, excellent ambient
performance, XpressO is an excellent choice
over the conventional technologies.
Contents
page
Model Selection & Part Number Guide
2
Electrical Characteristic
2
Absolute Maximums
3
Output Wave Characteristics
3
Phase Noise
4
Jitter
4
Pin Assignment
5
Recommended Circuit
5
Reflow
5
Mechanical Drawing and Pad Layout
6
Tape and Reel Specification
7
Label
7
Traceability – LOT Number & Serial Identification 8
RoHS Material Declaration
9
SGS Report
10 & 11
Mechanical Test
12
Burn-In Test
12
MTTF / FITS calculations
13
Other XPRESSO Links
14
Fox Contact Information
14
Finished XPRESSO parts are 100% final tested.
FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 http://www.foxonline.com
EMEA Tel/Fax: +44 .1767.312632 | Asia Hong Kong Tel: +852.2854.4285 Fax +852.2854.4282
Taiwan Tel: +886.2.22073427 Fax +886.2.22073486 | Japan Tel: +81.3.3374.2079 Fax: +81.3.3374.5221
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified
Page 1 of 14

1 Page





FXO-HC73 pdf, ピン配列
FXO-HC73 Series
Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested)
Parameters
Input Voltage
Operating Temperature
Storage Temperature
Junction Temperature
ESD Sensitivity
Symbol
VDD
TAMAX
TSTG
HBM
Condition
Human Body Model
Maximum Value
(unless otherwise noted)
–0.5V to +5.0V
–55°C to +105°C
–55°C to +125°C
150°C
1 kV
Output Wave Characteristics
Parameters
Symbol
Condition
Output LOW Voltage
Output HIGH Voltage
VOL
0.75 to 150 MHz
150+ to 250 MHz
VOH
0.75 to 150 MHz
150+ to 250 MHz
Output Symmetry (See Drawing Below)
@ 50% VDD Level
Output Enable (PIN # 1) Voltage
VIH
Output Disable (PIN # 1) Voltage
Cycle Rise Time (See Drawing Below)
Cycle Fall Time (See Drawing Below)
VIL
TR
TF
0.75 to 150 MHz
150+ to 250 MHz
0.75 to 150 MHz
150+ to 250 MHz
If 30% to 70% times are used, Rise and Fall times change to 1.5 nS from 0.75 to 250MHz
If 20% to 80% times are used, Rise and Fall times change to 2 nS from 0.75 to 150MHz
Rise Time / Fall Time Measurements
Maximum Value
(unless otherwise noted)
10% VDD
20% VDD
90% VDD MIN
80% VDD MIN
45% ~ 55%
> 70% VDD
< 30% VDD
3 nS (10%~90%)
3 nS (20%~80%)
3 nS (90%~10%)
3 nS (80%~20%)
10% to 90%
0V to VDD
20% to 80%
30% to 70%
10% - 90%
Rise Time
90% - 10%
Fall Time
80 - 20
Times
Oscillator Symmetry
On Time
Off Time
1/2 Period
1/2 Period
70 - 30
Times
50% VDD
Period
Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45
Page 3 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified


3Pages


FXO-HC73 電子部品, 半導体
FXO-HC73 Series
Mechanical Dimensional Drawing & Pad Layout
7.5 Max
#4 #3
Top
View
5.2 Max
#1 #2
Pin 1 Designator
(FOX Head or Dot)
Actual part marking
is depicted.
See Traceability (pg. 8)
for more information
1.4 Max
2.54 1.4
Bottom
View
#1
#4
TP* #2
2.6
TP* #3
5.08
Recommended
Solder Pad Layout
5.08
2.0
4.2
1.8
Note: XPRESSO HCMOS XOs are designed to fit on
industry standard, 4 pad, layouts.
Pin Connections
#1) E/D
#3 Output
#2 GND
#4 VDD
*TP are test points and are NC
Drawing is for reference to critical specifications defined by size measurements.
Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary
Page 6 of 14
© 2008 FOX ELECTRONICS | ISO9001:2000 Certified

6 Page



ページ 合計 : 14 ページ
 
PDF
ダウンロード
[ FXO-HC73 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FXO-HC73

HCMOS 7 x 5mm 3.3V Oscillator

Fox Electronics
Fox Electronics
FXO-HC736R-40

OSCILLATOR

Fox Electronics
Fox Electronics


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap