|
|
Número de pieza | MIC5528 | |
Descripción | High-Performance 500mA LDO | |
Fabricantes | Micrel Semiconductor | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de MIC5528 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! MIC5528
High-Performance 500mA LDO
in Thin and Extra Thin DFN Packages
General Description
The MIC5528 is a low-power, µCap, low dropout regulator
designed for optimal performance in a very-small footprint.
It is capable of sourcing up to 500mA of output current
while only drawing 38µA of operating current. This high-
performance LDO is a µCap design in a thermally
enhanced 1.2mm × 1.2mm extra thin (0.4mm ht.) DFN
package. It operates with small ceramic output capacitor
for stability, thereby reducing required board space.
Ideal for battery-operated applications, the MIC5528 offers
±2% accuracy, extremely low dropout voltage (260mV @
500mA), and can regulate output voltages down to 1.0V.
Equipped with a TTL logic-compatible enable pin, the
MIC5528 can be put into a zero-off-mode current state,
drawing no current when disabled.
The MIC5528 is a µCap design, operating with very small
ceramic output capacitors for stability, reducing required
board space and component cost for space-critical
applications. The MIC5528 has an operating junction
temperature range of –40°C to 125°C.
Datasheets and support documentation are available on
Micrel’s web site at: www.micrel.com.
Features
• Input voltage range: 2.5V to 5.5V
• Fixed output voltages down to 1.0V
• ±2% Room temperature accuracy
• Low quiescent current 38µA
• Stable with 2.2µF ceramic output capacitors
• Low dropout voltage 260mV @ 500mA
• Auto discharge and internal enable pulldown
• Thermal-shutdown and current-limit protection
• 6-pin 1.2mm × 1.2mm extra thin DFN package
• 6-pin 1.2mm × 1.2mm thin DFN package
Applications
• Portable communication equipment
• DSC, GPS, PMP, and PDAs
• Portable medical devices
• 5V POL applications
Typical Application
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
May 5, 2014
Revision 1.1
1 page Micrel, Inc.
Typical Characteristics (Continued)
750
700
650
600
550
500
450
400
350
300
2.5
Current Limit
vs. Supply Voltage
VOUT = 3.3V
CIN = COUT = 2.2µF
3 3.5 4 4.5 5
SUPPLY VOLTAGE (V)
5.5
Output Noise Spectral Density
(MIC5528-3.3YMT)
10
1
0.1
0.01
VIN = VEN1= 4.5V
COUT = 2.2µF
VOUT = 3.3V
0.001
10 100 1K 10K 100K
FREQUENCY (Hz)
1M 10M
MIC5528
May 5, 2014 5 Revision 1.1
5 Page Micrel, Inc.
PCB Layout Recommendations
MIC5528
Top Layer
May 5, 2014
Bottom Layer
11
Revision 1.1
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet MIC5528.PDF ] |
Número de pieza | Descripción | Fabricantes |
MIC5524 | High-Performance 500mA LDO | Micrel Semiconductor |
MIC5528 | High-Performance 500mA LDO | Micrel Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |