DataSheet.jp

HCPL-5301 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 HCPL-5301
部品説明 Intelligent Power Module and Gate Drive Interface Optocouplers
メーカ Agilent(Hewlett-Packard)
ロゴ Agilent(Hewlett-Packard) ロゴ 



Total 14 pages
		

No Preview Available !

HCPL-5301 Datasheet, HCPL-5301 PDF,ピン配置, 機能
H
Intelligent Power Module and
Gate Drive Interface Optocouplers
Technical Data
HCPL-4506
HCPL-0466
HCNW4506
Features
Applications
• Performance Specified for
• IPM Isolation
Common IPM Applications
over Industrial Temperature
Range: -40°C to 100°C
• Fast Maximum Propagation
Delays
tPHL = 400 ns
tPLH = 550 ns
• Minimized Pulse Width
• Isolated IGBT/MOSFET Gate
Drive
• AC and Brushless DC Motor
Drives
• Industrial Inverters
Description
Distortion (PWD = 450 ns)
The HCPL-4506 and HCPL-0466
• 15 kV/µs Minimum Common contain a GaAsP LED while the
Mode Transient Immunity at HCNW4506 contains an AlGaAs
VCM = 1500 V
• CTR > 44% at IF = 10 mA
• Safety Approval
LED. The LED is optically
coupled to an integrated high gain
photo detector. Minimized propa-
UL Recognized - 2500 V rms
for 1 minute (5000 V rms for Functional Diagram
1 minute for HCNW4506 and
HCPL-4506 Option 020) per
UL1577
NC 1
8 VCC
CSA Approved
20 k
VDE 0884 Approved
ANODE 2
7 VL
-VIORM = 630 V peak for
HCPL-4506 Option 060
-VIORM = 1414 V peak for
HCNW4506
BSI Certified (HCNW4506)
CATHODE 3
NC 4
SHIELD
6 VO
5 GND
gation delay difference between
devices make these optocouplers
excellent solutions for improving
inverter efficiency through
reduced switching dead time.
An on chip 20 koutput pull-up
resistor can be enabled by short-
ing output pins 6 and 7, thus
eliminating the need for an
external pull-up resistor in
common IPM applications. Speci-
fications and performance plots
are given for typical IPM
applications.
Truth Table
LED
ON
OFF
VO
L
H
Selection Guide
Operating Temperature
TA [°C]
Min.
-40
-55
Max.
100
125
8-Pin DIP
(300 Mil)
HCPL-4506
Single Channel Packages
Small Outline
SO-8
Widebody
(400 Mil)
HCPL-0466
HCNW4506
*Technical data for these products are on separate HP publications.
Hermetic*
HCPL-5300
HCPL-5301
The connection of a 0.1 µF bypass capacitor between pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
5965-3603E
1-49

1 Page





ページ 合計 : 14 ページ
PDF
ダウンロード
[ HCPL-5301.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
HCPL-5300

Intelligent Power Module and Gate Drive Interface Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-5300

Intelligent Power Module and Gate Drive Interface Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-5301

Intelligent Power Module and Gate Drive Interface Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-5301

Intelligent Power Module and Gate Drive Interface Optocouplers

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap