|
|
PDF PR49MF11NSZF Data sheet ( Hoja de datos )
| Número de pieza | PR49MF11NSZF | |
| Descripción | Non-Zero Cross type DIP 8pin Triac output SSR | |
| Fabricantes | Sharp | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de PR49MF11NSZF (archivo pdf) en la parte inferior de esta página. Total 15 Páginas | ||
|
No Preview Available !
PR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series
PR29MF1xNSZ Series
PR39MF1xNSZ Series
PR49MF11NSZ Series
∗Zero cross type is also available. (PR29MF2xNSZ Series/
PR39MF2xNSZ Series)
IT(rms)≤0.9A, Non-Zero Cross type
DIP 8pin
Triac output SSR
■ Description
PR29MF1xNSZ Series, PR39MF1xNSZ Series and
PR49MF11NSZ Series Solid State Relays (SSR) are
an integration of an infrared emitting diode (IRED), a
Phototriac Detector and a main output Triac. These
devices are ideally suited for controlling high voltage
AC loads with solid state reliability while providing
4.0kV isolation (Viso(rms)) from input to output.
■ Features
1. Output current, IT(rms)≤0.9A
2. Non-zero crossing functionary
3. 8 pin DIP package (SMT gullwing also available)
4. High repetitive peak off-state voltage
(VDRM : 800V, PR49MF11NSZ Series)
(VDRM : 600V, PR39MF1xNSZ Series)
(VDRM : 400V, PR29MF1xNSZ Series)
5. IFT ranks available (see Model Line-up in this
datasheet)
6. Superior noise immunity
(dV/dt : MIN. 100V/µs, PR29MF1xNSZ Series and
PR39MF1xNSZ Series)
(dV/dt : MIN. 50V/µs, PR49MF11NSZ Series)
7. Response time, ton : MAX. 100µs
8. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
9. High isolation voltage between input and output
(Viso(rms) : 4.0kV)
■ Agency approvals/Compliance
1. Recognized by UL508 (except for PR49MF11NSZ
Series), file No. E94758 (as model No. R29MF1/
R39MF1)
2. Approved by CSA 22.2 No.14 (except for
PR49MF11NSZ Series), file No. LR63705 (as model
No. R29MF1/R39MF1)
3. Optionary available VDE approved (∗)(DIN EN 60747-5-
2), file No.40008898 (only for PR39MF1xNSZ Series
as model No. R39MF1)
4. Package resin : UL flammability grade (94V-0)
(∗) DIN EN60747-5-2 : successor standard of DIN VDE0884.
Up to Date code "RD" (December 2003), approval of DIN
VDE0884.
From Date code "S1" (January 2004), approval of DIN
EN60747-5-2.
■ Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Phase or power control in applications such as
lighting and temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Sheet No.: D4-A00601EN
1 Date Mar. 31. 2004
© SHARP Corporation
1 page  
PR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series
■ Absolute Maximum Ratings
(Ta=25˚C)
Parameter
Symbol Rating Unit
Input
Forward current
Reverse voltage
RMS ON-state current
Peak one cycle surge current
IF
VR
IT(rms)
Isurge
50 *3
6
0.9 *3
9 *4
mA
V
A
A
Output Repetitive
PR29MF1xNSZ
400
peak OFF-state PR39MF1xNSZ VDRM 600
V
voltage
PR49MF11NSZ
800
*1Isolation voltage
Viso(rms) 4.0
kV
Operating temperature
Topr −25 to +85 ˚C
Storage temperature
*2Soldering temperature
Tstg −40 to +125 ˚C
Tsol 270 *5 ˚C
*1 40 to 60%RH, AC for 1minute, f=60Hz
*2 For 10s
*3 Refer to Fig.1, Fig.2
*4 f=50Hz sine wave
*5 Lead solder plating models : 260˚C
Soldering area
■ Electro-optical Characteristics
Input
Output
Transfer
charac-
teristics
Parameter
Forward voltage
Reverse current
Repetitive peak OFF-state current
ON-state voltage
Holding current
Critical rate of rise of
OFF-state voltage
PR29MF1xNSZ
PR39MF1xNSZ
PR49MF11NSZ
PR29MF1xNSZ
PR39MF1xNSZ
PR49MF11NSZ
Minimum trigger current
Isolation resistance
Rank 1
Rank 2
Turn-on time
Rank 1
Rank 2
Symbol
VF
IR
IDRM
VT
IH
dV/dt
IFT
RISO
ton
Conditions
IF=20mA
VR=3V
VD=VDRM
IT=0.9A
VD=6V
VD=1/√−2 ·VDRM
VD=6V, RL=100Ω
DC500V,40 to 60%RH
IF=20mA, VD=6V, RL=100Ω
IF=10mA, VD=6V, RL=100Ω
MIN.
−
−
−
−
−
−
−
100
50
−
−
5×1010
TYP.
1.2
−
−
−
−
−
−
−
−
−
−
−
1011
(Ta=25˚C)
MAX. Unit
1.4 V
10 µA
100 µA
3.0 V
25
mA
50
−
− V/µs
−
10 mA
5
−Ω
− − 100 µs
Sheet No.: D4-A00601EN
5
5 Page 
PR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series
■ Manufacturing Guidelines
● Soldering Method
Reflow Soldering:
Reflow soldering should follow the temperature profile shown below.
Soldering should not exceed the curve of temperature profile and time.
Please don't solder more than twice.
(˚C)
300 Terminal : 260˚C peak
( package surface : 250˚C peak)
200
100 Preheat
150 to 180˚C, 120s or less
Reflow
220˚C or more, 60s or less
0
0 1 2 3 4 (min)
Flow Soldering :
Flow soldering should be completed below 270˚C and within 10s.
Preheating is within the bounds of 100 to 150˚C and 30 to 80s.
Please don't solder more than twice.
Hand soldering
Hand soldering should be completed within 3s when the point of solder iron is below 400˚C.
Please don't solder more than twice.
Other notices
Please test the soldering method in actual condition and make sure the soldering works fine, since the impact
on the junction between the device and PCB varies depending on the tooling and soldering conditions.
Sheet No.: D4-A00601EN
11
11 Page | ||
| Páginas | Total 15 Páginas | |
| PDF Descargar | [ Datasheet PR49MF11NSZF.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| PR49MF11NSZF | Non-Zero Cross type DIP 8pin Triac output SSR | Sharp |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |