|
|
PDF ISL6333A Data sheet ( Hoja de datos )
| Número de pieza | ISL6333A | |
| Descripción | Three-Phase Buck PWM Controller | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de ISL6333A (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
|
No Preview Available !
ISL6333, ISL6333A, ISL6333B, ISL6333C
®
Data Sheet
October 8, 2010
FN6520.3
Three-Phase Buck PWM Controller with
Integrated MOSFET Drivers and Light
Load Efficiency Enhancements for Intel
VR11.1 Applications
The ISL6333 three-phase PWM family of control ICs provide a
precision voltage regulation system for advanced
microprocessors. The integration of power MOSFET drivers
into the controller IC marks a departure from the separate PWM
controller and driver configuration of previous multi-phase
product families. By reducing the number of external parts, this
integration is optimized for a cost and space saving power
management solution.
The ISL6333 controllers are designed to be compatible with
Intel VR11.1 Applications. Features that make these controllers
compatible include an IMON pin for output current monitoring,
and a Power State Indicator (PSI#) pin for phase dropping and
higher efficiency during light load states. An 8-bit VID input is
used to select the desired output voltage from the VR11 DAC
table. A circuit is provided for remote voltage sensing,
compensating for any potential difference between remote and
local grounds. The output voltage can also be positively or
negatively offset through the use of a single external resistor.
The ISL6333 controllers also include advanced control loop
features for optimal transient response to load application and
removal. One of these features is highly accurate, fully
differential, continuous DCR current sensing for load line
programming and channel current balance. Active Pulse
Positioning (APP) Modulation and Adaptive Phase Alignment
(APA) are two other unique features, allowing for quicker initial
response to high di/dt load transients. With this quicker initial
response to load transients, the number of output bulk
capacitors can be reduced, helping to reduce cost.
Integrated into the ISL6333 controllers are user-programmable
current sense resistors, which require only a single external
resistor to set their values. No external current sense resistors
are required. Another unique feature of the ISL6333 controllers
is the addition of a dynamic VID compensation pin that allows
optimizing compensation to be added for well-controlled
dynamic VID response.
Protection features of these controller ICs include a set of
sophisticated overvoltage, undervoltage, and overcurrent
protection. Furthermore, the ISL6333 controllers include
protection against an open circuit on the remote sensing inputs.
Combined, these features provide advanced protection for the
microprocessor and power system.
Features
• Intel VR11.1 Compatible
- IMON Pin for Output Current Monitoring
- Power State Indicator (PSI#) Pin for Phase Dropping
and Higher Efficiency During Light Load States
• CPURST_N Input to Eliminate Required Extensive
External Circuit for proper PSI# Operation of Intel’s
Eaglelake Chipset Platform (ISL6333B, ISL6333C Only)
• Integrated Multi-Phase Power Conversion
- 3-Phase or 2-Phase Operation with Internal Drivers
• Precision Core Voltage Regulation
- Differential Remote Voltage Sensing
- ±0.5% System Accuracy Over-Temperature
- Adjustable Reference-Voltage Offset
• Optimal Transient Response
- Active Pulse Positioning (APP) Modulation
- Adaptive Phase Alignment (APA)
• Fully Differential, Continuous DCR Current Sensing
- Integrated Programmable Current Sense Resistors
- Accurate Load Line Programming
- Precision Channel Current Balancing
• Gate Voltage Optimization Technology (ISL6333,
ISL6333B Only)
• Power Saving Diode Emulation Mode (ISL6333, ISL6333B
Only)
• Optimized for use with Coupled Inductors
• Variable Gate Drive Bias: +5V to +12V
• Microprocessor Voltage Identification Inputs
- 8-bit VID Input for Selecting VR11 DAC Voltages
- Dynamic VID Technology
• Dynamic VID Compensation
• Overcurrent Protection and Channel Current Limit
• Multi-tiered Overvoltage Protection
• Digital Soft-Start
• Selectable Operation Frequency up to 1.0MHz Per Phase
• Pb-free (RoHS Compliant)
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008, 2009, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1 page  
ISL6333, ISL6333A, ISL6333B, ISL6333C
Integrated Driver Block Diagram
LVCC UVCC
PWM
LOW POWER
STATE
SOFT-START
AND
FAULT LOGIC
GATE
CONTROL
LOGIC
SHOOT-
THROUGH
PROTECTION
BOOT
UGATE
20kΩ
PHASE
10kΩ
LGATE
5 FN6520.3
October 8, 2010
5 Page 
ISL6333, ISL6333A, ISL6333B, ISL6333C
Typical Application Diagram - ISL6333, ISL6333B with NTC Thermal Compensation
+5V
RGND
VDIFF
DVC
RGND VSEN
+5V VCC
RSET
FB
IDROOP
BYP1
PVCC1
+12V
COMP
APA
VCC
OFS
FS
REF
IMON
SS
PUVCC
BOOT1
UGATE1
PHASE1
1.8Ω
LGATE1
ISEN1-
ISEN1+
PVCC2_3
ISL6333/B
BOOT2
UGATE2
PHASE2
1.8Ω
+12V
VID7
VID6
VID5
VID4
VID3
VID2
VID1
VID0
CPURST_N
PSI#
VR_RDY
LGATE2
ISEN2-
ISEN2+
+12V
BOOT3
UGATE3
PHASE3
1.8Ω
EN
GND
LGATE3
ISEN3-
ISEN3+
PLACE IN CLOSE
NTC PROXIMITY
LOAD
*NOTE: ISL6333 - Connect the IDROOP pin to the FB pin. The CPURST_N pin does not exist.
*NOTE: ISL6333B - The CPURST_N pin should connect to the CPURST_N signal. The IDROOP pin does not exist.
11 FN6520.3
October 8, 2010
11 Page | ||
| Páginas | Total 30 Páginas | |
| PDF Descargar | [ Datasheet ISL6333A.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| ISL6333 | Three-Phase Buck PWM Controller | Intersil Corporation |
| ISL6333A | Three-Phase Buck PWM Controller | Intersil Corporation |
| ISL6333B | Three-Phase Buck PWM Controller | Intersil Corporation |
| ISL6333C | Three-Phase Buck PWM Controller | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |