DataSheet.jp

OPB940 の電気的特性と機能

OPB940のメーカーはOPTEKです、この部品の機能は「Photologic Slotted Optical Switches」です。


製品の詳細 ( Datasheet PDF )

部品番号 OPB940
部品説明 Photologic Slotted Optical Switches
メーカ OPTEK
ロゴ OPTEK ロゴ 




このページの下部にプレビューとOPB940ダウンロード(pdfファイル)リンクがあります。

Total 7 pages

No Preview Available !

OPB940 Datasheet, OPB940 PDF,ピン配置, 機能
Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
Features:
Choice of aperture size
Choice of output configurations
Choice of opaque or IR transmissive shell
Choice of pins (L) or wires (W)
0.125” (3.18 mm) slot width
0.320” (8.128 mm) lead spacing for PCBoard (side mounting)
Data rates to 250 kBaud
L Package
W Package
Description:
The OPB930 and OPB940 series of Photologic® photo integrated circuit switches provide optimum flexibility for
the design engineer. Building from a standard housing with a 0.125” (3.18 mm) wide slot, a user can specify the
type and polarity of TTL output, discrete shell material, aperture width and either 0.350” (8.9 mm) long pins
(L Series) or 24” (610 mm) AWG, UL listed wire leads (W Series).
All housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity
to both visible and near-infrared ambient radiation. Discrete shells (exposed on the parallel faces inside the device
throat) are either IR transmissive plastic (for applications where aperture contamination may occur) or opaque
plastic (for maximum protection against ambient light).
Electrical output can be specified as either TTL Totem Pole or TTL Open Collector, either of which can be supplied
with buffer or inverter output polarity. All devices have the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Mechanical switch replacement
Speed indication (tachometer)
Mechanical limit indication
Part Number Guide — OPB930 and OPB940 Series
OPB 9 X X X X X Z———————For “W” series only
Optek Assembly
Sensor Aperture:
1 — 0.010” (2.54 mm)
5 — 0.050” (12.70 mm)
Photologic® Photo Integrated
Circuit Sensor Family
Emitter Aperture:
5 — 0.050” (12.70 mm)
Discrete Shell Material:
3 — Side mount IR transmissive
Plastic discrete shell
4 — Side mount opaque
Plastic discrete shell
Electrical Specification Variations:
0 = Buffered Totem-Pole Output
1 = Buffered Open-Collector Output
2 = Inverted Totem-Pole Output
3 = Inverted Open-Collector Output
Mounting configurations:
L — Solder leads termination
W — Wire termination
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND
Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing
structural failure in OPTEK’s molded plastics.
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 02/08
Page 1 of 7

1 Page





OPB940 pdf, ピン配列
Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
Color- Pin # Description
Red—1
Anode
Black—2
Cathode
White—3
VCC
Blue—4
Output
Green—5
Ground
PCBoard (L) version
DIMENSIONS ARE IN:
[ MILLIMETERS]
INCHES
Wired (W) version
The W Series includes wire terminations of 24” (610 mm) 7-strand, 26
AWG UL insulated wire on each terminal. Each device incorporates a
wire strain relief at the housing surface. The insulation functions and
colors are: anode (red), cathode (black), phototransistor collector (white)
and phototransistor emitter (green).
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com
Issue A.3 02/08
Page 3 of 7


3Pages


OPB940 電子部品, 半導体
Photologic® Slotted Optical Switch
OPB930 and OPB940 (L and W Series)
OPB930_51, OPB940_51 - Flag Next to Emitter
1.20
OPB930_51, OPB940_51 - Flag Next to Sensor
1.20
1.00
0.80
0.60
0.40
0.20
Right to Left (back)
Top to Bottom
Bottom to Top
Left to Right
Right to Left
Left to Right (back)
1.00
Right to Left (back)
Right to Left
0.80
Top to Bottom
0.60 Bottom to Top
Left to Right
0.40
Left to Right (back)
0.20
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.00
0.25 0.00
OPB930_51, OPB940_51 - Flag in Middle of Slot
1.20
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
1.00
Right to Left (back)
Right to Left
0.80
Top to Bottom
0.60 Bottom to Top
Left to Right
0.40 Left to Right (back)
0.20
0.00
0.00
0.05 0.10 0.15 0.20
Displacement Distance (inches)
0.25
0 Top to Bottom
Left to Right
Emitter
Right to Left
Sensor
0 Width
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3 02/08
Page 6 of 7
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 [email protected] www.optekinc.com

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ OPB940 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
OPB940

Photologic Slotted Optical Switches

OPTEK
OPTEK
OPB940L

(OPB930L / OPB940L) Photologic Slotted Optical Switches

OPTEK
OPTEK
OPB940W

(OPB930W / OPB940W) Photologic Slotted Optical Switches

OPTEK
OPTEK
OPB947

(OPB947 / OPB948) PHOTOLOGIC SLOTTED SWITCHES

ETC
ETC


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap