DataSheet.jp

HCPL-315J PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 HCPL-315J
部品説明 0.5 Amp Output Current IGBT Gate Drive Optocoupler
メーカ Agilent
ロゴ Agilent ロゴ 



Total 21 pages
		

No Preview Available !

HCPL-315J Datasheet, HCPL-315J PDF,ピン配置, 機能
0.5 Amp Output Current IGBT
Gate Drive Optocoupler
Technical Data
HCPL-3150 (Single Channel)
HCPL-315J (Dual Channel)
Features
• 0.5 A Minimum Peak Output
Current
• 15 kV/µs Minimum Common
Mode Rejection (CMR) at
VCM = 1500 V
• 1.0 V Maximum Low Level
Output Voltage (VOL)
Eliminates Need for
Negative Gate Drive
• ICC = 5 mA Maximum Supply
Current
• Under Voltage Lock-Out
Protection (UVLO) with
Hysteresis
• Wide Operating VCC Range:
15 to 30 Volts
• 0.5 µs Maximum
Propagation Delay
• +/– 0.35 µs Maximum Delay
Between Devices/Channels
• Industrial Temperature
Range:
-40°C to 100°C
• HCPL-315J: Channel One to
Channel Two Output
Isolation = 1500 Vrms/1 min.
• Safety and Regulatory
Approval:
UL Recognized (UL1577)
3750 Vrms/1 min.
IEC/EN/DIN EN 60747-5-2
Approved
VIORM = 630 Vpeak
(HCPL-3150 Option 060 only)
VIORM = 891 Vpeak (HCPL-
315J) CSA Certified
Applications
• Isolated IGBT/MOSFET
Gate Drive
• AC and Brushless DC Motor
Drives
• Industrial Inverters
• Switch Mode Power
Supplies (SMPS)
• Uninterruptable Power
Supplies (UPS)
Functional Diagram
N/C 1
ANODE 2
8 VCC
7 VO
Description
The HCPL-315X consists of a
LED optically coupled to an
integrated circuit with a power
output stage. This optocoupler is
ideally suited for driving power
IGBTs and MOSFETs used in
motor control inverter applica-
tions. The high operating voltage
range of the output stage pro-
vides the drive voltages required
by gate controlled devices. The
voltage and current supplied by
this optocoupler makes it ideally
suited for directly driving IGBTs
with ratings up to 1200 V/50 A.
For IGBTs with higher ratings,
the HCPL-3150/315J can be used
to drive a discrete power stage
which drives the IGBT gate.
N/C 1
ANODE 2
CATHODE 3
SHIELD
16 VCC
15 VO
14 VEE
CATHODE 3
N/C 4
SHIELD
HCPL-3150
TRUTH TABLE
6 VO
5 VEE
ANODE 6
CATHODE 7
N/C 8
SHIELD
HCPL-315J
11 VCC
10 VO
9 VEE
LED
VCC - VEE
“Positive Going”
(i.e., Turn-On)
VCC - VEE
“Negative-Going”
(i.e., Turn-Off)
VO
OFF
ON
ON
ON
0 - 30 V
0 - 11 V
11 - 13.5 V
13.5 - 30 V
0 - 30 V
0 - 9.5 V
9.5 - 12 V
12 - 30 V
LOW
LOW
TRANSITION
HIGH
A 0.1 µF bypass capacitor must be connected between the VCC and VEE pins for each channel.
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.

1 Page





ページ 合計 : 21 ページ
PDF
ダウンロード
[ HCPL-315J.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
HCPL-3150

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HCPL-3150

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Avago
Avago
HCPL-315J

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Agilent
Agilent
HCPL-315J

0.5 Amp Output Current IGBT Gate Drive Optocoupler

Avago
Avago

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap