DataSheet.jp

BD10KA5FP-E2 の電気的特性と機能

BD10KA5FP-E2のメーカーはROHM Semiconductorです、この部品の機能は「500mA Variable/Fixed Output LDO Regulators」です。


製品の詳細 ( Datasheet PDF )

部品番号 BD10KA5FP-E2
部品説明 500mA Variable/Fixed Output LDO Regulators
メーカ ROHM Semiconductor
ロゴ ROHM Semiconductor ロゴ 




このページの下部にプレビューとBD10KA5FP-E2ダウンロード(pdfファイル)リンクがあります。

Total 18 pages

No Preview Available !

BD10KA5FP-E2 Datasheet, BD10KA5FP-E2 PDF,ピン配置, 機能
Datasheet
500mA Variable/Fixed Output
LDO Regulators
BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
General Description
The BDxxKA5 series are low-saturation regulators that are available for output currents up to 500mA. The output voltage
precision is ±1%. These LDO regulators are offered in several output voltages and package lineups with or without
ON/OFF switches (that set the circuit current to 0μA at shutdown). This series can be used for a broad spectrum of
applications ranging from TVs and car audio systems to HDDs, PCs, and DVDs. There regulators have a built-in
overcurrent protection circuit that prevents the destruction of the IC, due to output short circuits and a thermal shutdown
circuit.
Features
„ Output voltage precision: ±1%
„ Low-saturation voltage with PMOS output: 0.12V
Typ.(Io=200mA)
„ Built-in over-current protection circuit
„ Built-in thermal shutdown circuit
„ Shutdown switch (BDxxKA5WFP and BDxxKA5WF
series)
„ Ceramic capacitor compatible (recommended
capacitance: 1μF or greater)
Key Specifications
„ Input Power Supply Voltage:
„ Output voltage type: BA00KA5
BAxxKA5
„ Output current:
„ Operating temperature range:
5.5V (Max.)
Variable
Fixed
500mA (Max.)
-40to +105
Applications
Microcontrollers and all electronic devices that use
logic circuit
Packages
SOP8
TO252-3
TO252-5
W (Typ.) x D (Typ.) x H (Max.)
5.00mm x 6.20mm x 1.71mm
6.50mm x 9.50mm x 2.50mm
6.50mm x 9.50mm x 2.50mm
SOP8
TO252-3
TO252-5
Lineup matrix
Part Number
BDxxKA5WFP
BDxxKA5WF
BDxxKA5FP
Output Voltage (V)
1.0 1.2 1.5 1.8 2.5 3.0 3.3 Variable
○○○○○○○
○○○○○○○
○○○○○○○
-
Package
TO252-5
SOP8
TO252-3
Ordering Information
BD x x K A 5
W
xx-
E2
Part Number Output voltage
00:Variable
Other: Fixed
Current capacity
KA5: 500mA
Shutdown Switch Package
W: Include
None:without FP : TO252-3
TO252-5
F : SOP8
Packaging and forming specification
E2: Embossed tape and reel
Product structureSilicon monolithic integrated circuit
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ2211114001
This product is not designed protection against radioactive rays.
1/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001

1 Page





BD10KA5FP-E2 pdf, ピン配列
BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
Block Diagrams / Standard Example Application Circuits / Pin Configurations / Pin Descriptions
Datasheet
Fig.1
Fig.4
Fig.2
[BDxxKA5FP]
GND(FIN)
Fig.3
N.C.(2PIN)
Fig.5
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ2211115001
3/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001


3Pages


BD10KA5FP-E2 電子部品, 半導体
BDxxKA5 Series BDxxKA5W Series BD00KA5W Series
Typical Performance Curves
(Unless specified otherwise, Vcc=25V,VCTL =2V,and Io=0mA)
Datasheet
SUPPLY VOLTAGE : Vcc[V]
Fig.6
Circuit current
SUPPLY VOLTAGE : Vcc[V]
Fig.7
Input StabilityIo=0mA
SUPPLY VOLTAGE : Vcc[V]
Fig.8
Input Stability
Io=500mA
OUTPUT CURRENT : IO[A]
Fig.9
Load Stability
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
TSZ2211115001
6/15
TSZ02201-0R6R0A600150-1-2
26.Jun.2012 Rev.001

6 Page



ページ 合計 : 18 ページ
 
PDF
ダウンロード
[ BD10KA5FP-E2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
BD10KA5FP-E2

500mA Variable/Fixed Output LDO Regulators

ROHM Semiconductor
ROHM Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap