|
|
PDF HS103DR-D53TP25D Data sheet ( Hoja de datos )
| Número de pieza | HS103DR-D53TP25D | |
| Descripción | DIN Rail Mount | |
| Fabricantes | Crydom | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HS103DR-D53TP25D (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
HS103DR Series Assemblies
• 55 amp AC output @ 40°C
• Single Channel or 3 Phase output
• 3 to 32 VDC input control voltage
• DIN Rail mounted
• UL, CSA, VDE, CE approved SSRs
PRODUCT SELECTION
Description
3-32 VDC Control
OUTPUT SPECIFICATIONS (1)
55 A
HS103DR-D2490
55 A
HS103DR-HD6090
55 A
HS103DR-D53TP25D
Description
Operating Voltage (47-63Hz) [Vrms]
Transient Overvoltage [Vpk]
Maximum Off-State Leakage Current @ Rated Voltage [mArms]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2)
Maximum Load Current [Arms]
Minimum Load Current [Arms]
Maximum Surge Current (16.6ms) [Apk]
Maximum On-State Voltage Drop @ Rated Current [Vpk]
Maximum I²t for Fusing (8.3 msec) [A² sec]
Minimum Power Factor (with Maximum Load)
INPUT SPECIFICATIONS (1)
HS103DR-D2490
24-280
600
10
500
55
0.04
1200
1.6
6000
0.5
HS103DR-HD6090
48-660
1200
10
500
55
0.04
1200
1.7
6000
0.5
HS103DR-D53TP25D
48-530
1200
10
500
55
0.05
250
1.6
260
0.5
Description
Control Voltage Range
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Maximum Reverse Voltage
Typical Input Current
Nominal Input Impeadance
Maximum Turn-On Time [msec]
Maximum Turn-Off Time [msec]
GENERAL SPECIFICATIONS
HS103DR-D2490
3-32 VDC
3.0 VDC
1.0 VDC
32 VDC
3.4 mA @ 5 VDC
1500 Ohms
1/2 Cycle
1/2 Cycle
HS103DR-HD6090
3-32 VDC
3.0 VDC
1.0 VDC
32 VDC
2.0 mA (3)
(3)
1/2 Cycle
1/2 Cycle
HS103DR-D53TP25D
3-32 VDC
3.0 VDC
1.0 VDC
32 VDC
10 mA @ 5 VDC
450 Ohms
1/2 Cycle
1/2 Cycle
Description
HS103DR-Dxx90
Dielectric Strength, Input/Output/Base (50/60Hz)
Minimum Insulation Resistance (@ 500 V DC)
4000 Vrms
109 Ohms
Maximum Capacitance, Input/Output
8 pF
Ambient Operating Temperature Range
-40 to 80˚C
Ambient Storage Temperature Range
-40 to 125˚C
Status Indicator Display
None
Weight (typical)
1.39 lb. (631g)
Encapsulation
Themally Conductive Epoxy
Recommended Terminal Screw Torque Range:
6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs.
(Screws dry without grease)
Thermal pad installed
Yes
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
3) Input circuitry for DC control version incorporates active current limiter (HD model only)
HS103DR-D53TP25D
4000 Vrms
109 Ohms
10 pF
-40 to 80°C
-40 to 125°C
None
1.84 lb (859g)
Themally Conductive Epoxy
6-32 Screws - 10 in/lbs. 8-32 Screws - 20 in/lbs.
(Screws dry without grease)
Yes
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet HS103DR-D53TP25D.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HS103DR-D53TP25D | DIN Rail Mount | Crydom |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |