DataSheet.jp

74476410 の電気的特性と機能

74476410のメーカーはWEです、この部品の機能は「WE-GF SMD Wire Wound Inductor」です。


製品の詳細 ( Datasheet PDF )

部品番号 74476410
部品説明 WE-GF SMD Wire Wound Inductor
メーカ WE
ロゴ WE ロゴ 




このページの下部にプレビューと74476410ダウンロード(pdfファイル)リンクがあります。

Total 5 pages

No Preview Available !

74476410 Datasheet, 74476410 PDF,ピン配置, 機能
A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Electrical Properties:
Properties
Test conditions
Value Unit
Tol.
Inductance
2.52 MHz L 10 µH ±10%
Rated current
DC Resistance
Self resonant frequency
Q-factor
∆T = 20 K
@ 20°C
2.52 MHz
IR 150 mA max.
RDC 2.1
Ω max.
fres 36 MHz typ.
Q 30
min.
E General information:
It is recommended that the temperature of the part does not exceed 105°C
under worst case operating conditions.
•Ambient temperature: -40°C to +85°C (refering to IR)
•Operating temperature: -40°C to +105°C
•Storage temperature (on tape & reel): -20°C to +40°C; 75% RH max.
•Test conditions of Electrical Properties: 20°C, 33% RH
if not specified differently
DESCRIPTION
4.6 2014-06-11 SSt
SSt
4.5 2014-01-08 SSt
SSt
4.4 2013-04-25 SSt
SSt Würth Elektronik eiSos GmbH & Co. KG
4.3 2013-02-04 SSt
MST EMC & Inductive Solutions
Max-Eyth-Str. 1
4.2 2012-12-05 SSt
SSt 74638 Waldenburg
4.1 2012-11-13 SSt
Germany
MST Tel. +49 (0) 79 42 945 - 0
4.0
2004-10-11
MST
- www.we-online.com
REV DATE
BY CHECKED
WE-GF SMD Wire Wound Inductor
Order.- No.
74476410
Size: 1210
SIZE
A4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.

1 Page





74476410 pdf, ピン配列
H Soldering Specifications:
H1: Classification Reflow Profile for SMT components:
H2: Classification Reflow Profiles
Profile Feature
Preheat
- Temperature Min (Tsmin)
- Temperature Max (Tsmax)
- Time (ts) from (Tsmin to Tsmax)
Ramp-up rate (TL to TP)
Liquidous temperature (TL)
Time (tL) maintained above TL
Peak package body temperature (Tp)
Time within 5°C of actual peak temperature (tp)
Ramp-down rate (TP to TL)
Time 25°C to peak temperature
refer to IPC/JEDEC J-STD-020D
Pb-Free Assembly
150°C
200°C
60-120 seconds
3°C/ second max.
217°C
60-150 seconds
See Table H3
20-30 seconds
6°C/ second max.
8 minutes max.
DESCRIPTION
4.6 2014-06-11 SSt
SSt
4.5 2014-01-08 SSt
SSt
4.4 2013-04-25 SSt
SSt Würth Elektronik eiSos GmbH & Co. KG
4.3 2013-02-04 SSt
MST EMC & Inductive Solutions
Max-Eyth-Str. 1
4.2 2012-12-05 SSt
SSt 74638 Waldenburg
4.1 2012-11-13 SSt
Germany
MST Tel. +49 (0) 79 42 945 - 0
4.0
2004-10-11
MST
- www.we-online.com
REV DATE
BY CHECKED
WE-GF SMD Wire Wound Inductor
Order.- No.
74476410
Size: 1210
SIZE
A4
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ 74476410 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
74476410

WE-GF SMD Wire Wound Inductor

WE
WE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap