DataSheet.jp

V23134-B0052-X506 の電気的特性と機能

V23134-B0052-X506のメーカーはTEです、この部品の機能は「Power Relay」です。


製品の詳細 ( Datasheet PDF )

部品番号 V23134-B0052-X506
部品説明 Power Relay
メーカ TE
ロゴ TE ロゴ 




このページの下部にプレビューとV23134-B0052-X506ダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

V23134-B0052-X506 Datasheet, V23134-B0052-X506 PDF,ピン配置, 機能
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4
n Pin assignment similar to ISO 7588 part 1
n Plug-in or PCB terminals
n Also available for 42VDC applications
Customized versions on request
– 24VDC versions with contact gap >0.8mm
– Integrated components (e.g. resistor, diode)
– Customized marking/color
– Special covers (e.g. notches, release features, brackets)
– Various contact arrangements and materials
– For latching (bistable) version refer to Power Relay F7 A Latching
 or Mini Relay Latching
– For shrouded/weatherproof dust cover versions refer to
Shrouded Power Relay F4 A and VF4 A
Typical applications
Cross carline up to 40A for example: ABS control, blower fans, car alarm,
cooling fan, Electric Power Steering, energy management, engine control,
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/
supply relay, valves, wiper control.
F134co_fcw1
Contact Data
Contact arrangement
1 form A, 1 NO/1 NO (2x87) 1 form U, 2 NO
1 form C, 1 CO
Contact gap
>0.8mm
Rated voltage
12VDC 24VDC
12VDC 24VDC
12VDC 24VDC 24VDC1)
Limiting continuous current
NO
NO
NO
NO
NO/NC
NO/NC
NO/NC
23°C
60A 60A
2x32A 2x32A
60/45A 60/45A 60/45A
85°C
40A 40A
2x25A 2x25A
40/30A 40/30A 40/30A
125°C
17A 17A
2x11A 2x11A
17/12A 17/12A 17/12A
Limiting making current2)
NO/NC
120A 120A
2x100A 2x100A
120/45A 120/45A 120/45A
Limiting breaking current
NO/NC
60A 20A
2x40A 2x15A
60/40A 20/15A 30/20A
Limiting short-time current
overload current, ISO 8820-33):
1.35 x 40A, 1800s 1.35 x 40A, 1800s 1.35 x 40A, 1800s
2.00 x 40A, 5s 2.00 x 40A, 5s
2.00 x 40A, 5s
3.50 x 40A, 0.5s 3.50 x 40A, 0.5s
3.50 x 40A, 0.5s
6.00 x 40A, 0.1s 6.00 x 40A, 0.1s
6.00 x 40A, 0.1s
Jump start test
ISO 16750-1 24VDC for 5min conducting nominal current at 23°C
Contact material silver based
Min. recommended contact load4) 1A at 5VDC
Initial voltage drop
NO contact at 10A, typ./max. 15/200mV 15/200mV
2x15/200mV 2x15/200mV
15/200mV 15/200mV 15/200mV
NC contact at 10A, typ./max.
20/250mV 20/250mV 20/250mV
Frequency of operation
at nominal load 6 ops./min (0.1Hz)
Operate/release time typ. 7/2ms5)
Electrical endurance
resistive load at 14VDC
>2x105 ops. >2x105 ops.
>2x105 ops.
40A
2x25A
40A (NO)
resistive load at 28VDC
>1x105 ops.
>1x105 ops.
>1x105 ops. 1x105 ops.
20A
2x15A
20A (NO) 30A (NO)
>5x105 ops.
10A (NC)
Mechanical endurance
DC coil >1x107ops.
1) Special high performance 24VDC version with contact gap >0.8mm, part number V23134-A0056-X432/-X433 (see part number table).
2) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current duration of
maximum 3s for a make/break ratio of 1:10.
3) Current and time are compatible with circuit protection by a typical automotive fuse. Relay will make, carry and break the specified current.
4) See chapter Diagnostics of Relays in our Application Notes or consult the internet at http://relays.te.com/appnotes/
5) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion and/or higher
risk of contact tack welding.
11-2013, Rev. 1113
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1

1 Page





V23134-B0052-X506 pdf, ピン配列
Terminal Assignment
NO
1 form A, 1 NO
85 87
Automotive Relays
Plug-in Mini ISO Relays
Power Relay F4 (Continued)
NOR
1 form A, 1 NO
with resistor
85 87
NOR_SD
1 form A, 1 NO
with resistor & serial diode
NO_2x87
1 form A, 1 NO (2x87)
85 87 87
NOR_2x87
1 form A, 1 NO (2x87)
with resistor
85 87 87
86 30
CO
1 form C, 1 CO
85 87 87a
86 30
COR
1 form C, 1 CO
with resistor
85 87 87a
COD
1 form C, 1 CO
with diode
85 87 87a
86 30
DNO
1 form U, 2 NO
85 87 87b
86 30
86 30
86 30
Dimensions
Power Relay F4 with quick connect (QC) terminals
86 30
86 30
View of the terminals (bottom view)
Measurement
reference plane
5x
0.3
TE1088-R1
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
Power Relay F4 with PCB terminals
TE1093-S1
View of the terminals (bottom view)
Mounting hole layout (bottom view)
4.5 ±0.3
*) For the make contact (2 x pin 87),
pin 87a = 87.
For the twin make contact,
pin 87a = 87b.
16.9 ±0.3
17.9 ±0.25
2.7 ±0.5
8.0 ±0.25
TE1654-91
TE1655-H1
8.4 ±0.25
For the make contact (2x87), pin 87a = 87;
for the double make contact, pin 87a = 87b.
TE0907-B1
11-2013, Rev. 1113
www.te.com
© 2013 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Datasheets and product specification ac-
cording to IEC 61810-1 and to be used only
together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
3


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ V23134-B0052-X506 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
V23134-B0052-X506

Power Relay

TE
TE


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap