DataSheet.jp

G3PA-VD の電気的特性と機能

G3PA-VDのメーカーはOMRONです、この部品の機能は「Extremely Thin Relays Integrated」です。


製品の詳細 ( Datasheet PDF )

部品番号 G3PA-VD
部品説明 Extremely Thin Relays Integrated
メーカ OMRON
ロゴ OMRON ロゴ 




このページの下部にプレビューとG3PA-VDダウンロード(pdfファイル)リンクがあります。
Total 16 pages

No Preview Available !

G3PA-VD Datasheet, G3PA-VD PDF,ピン配置, 機能
Power Solid-state Relay
G3PA-(VD)
Extremely Thin Relays Integrated with Heat
Sink
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals. (Except for
G3PA-260B-VD, G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Conforms to VDE 0160 (finger protection), with a dielectric
strength of 4,000 V between input and load.
Conforms to VDE 0805, IEC 950.
Approved by UL, CSA, and VDE (reinforced insulation).
Ordering Information
I List of Models
Model
G3PA-210B-VD
G3PA-220B-VD
G3PA-240B-VD
G3PA-260B-VD
G3PA-210BL-VD
G3PA-220BL-VD
G3PA-240BL-VD
G3PA-260BL-VD
G3PA-210B-VD
G3PA-220B-VD
G3PA-240B-VD
G3PA-260B-VD
G3PA-420B-VD
G3PA-430B-VD
G3PA-420B-VD-2
G3PA-430B-VD-2
G3PA-450B-VD-2
Isolation
Phototriac
coupler
Zero cross function
Yes
No
Yes
Indicator
Yes
Applicable output load
10 A at 24 to 240 VAC
20 A at 24 to 240 VAC
40 A at 24 to 240 VAC
60 A at 24 to 240 VAC
10 A at 24 to 240 VAC
20 A at 24 to 240 VAC
40 A at 24 to 240 VAC
60 A at 24 to 240 VAC
10 A at 24 to 240 VAC
20 A at 24 to 240 VAC
40 A at 24 to 240 VAC
60 A at 24 to 240 VAC
20 A at 180 to 400 VAC
30 A at 180 to 400 VAC
20 A at 200 to 480 VAC
30 A at 200 to 480 VAC
50 A at 200 to 480 VAC
Rated input voltage
5 to 24 VDC
24 VAC
12 to 24 VDC
Power Solid-state Relay G3PA-(VD)
http://www.Datasheet4U.com
J-21

1 Page





G3PA-VD pdf, ピン配列
Specifications
I Ratings (at 25°C)
Input
Model
Rated voltage
Voltage range
G3PA-210B-VD
G3PA-220B-VD
G3PA-240B-VD
G3PA-260B-VD
G3PA-210BL-VD
G3PA-220BL-VD
G3PA-240BL-VD
G3PA-260BL-VD
G3PA-210B-VD
G3PA-220B-VD
G3PA-240B-VD
G3PA-260B-VD
G3PA-420B-VD
G3PA-430B-VD
G3PA-420B-VD-2
G3PA-430B-VD-2
G3PA-450B-VD-2
5 to 24 VDC 4 to 30 VDC
5 to 24 VDC 4 to 30 VDC
24 VAC
19.2 to 26.4 VAC
12 to 24 VDC 9.6 to 30 VDC
Input current
impedance
7 mA max.
Voltage level
Must operate voltage Must release voltage
4 VDC max.
1 VDC min.
20 mA max.
4 VDC max.
1 VDC min.
1.4 kΩ±20%
19.2 VAC max.
4.8 VAC min.
7 mA max.
9.2 VDC max.
1 VDC min.
Output
Model
G3PA-210B(L)-VD
G3PA-220B(L)-VD
G3PA-240B(L)-VD
G3PA-260B(L)-VD
G3PA-420B-VD
G3PA-430B-VD
G3PA-420B-VD-2
G3PA-430B-VD-2
G3PA-450B-VD-2
Rated load voltage
24 to 240 VAC (50/60 Hz)
180 to 400 VAC (50/60 Hz)
200 to 480 VAC (50/60 Hz)
Applicable load
Load voltage range
Load current
19 to 264 VAC (50/60 Hz) 0.1 to 10 A
0.1 to 20 A
0.5 to 40 A
0.5 to 60 A
150 to 440 VAC (50/60 Hz) 0.5 to 20 A
0.5 to 30 A
180 to 528 VAC (50/60 Hz) 0.5 to 20 A
0.5 to 30 A
0.5 to 50 A
Refer to Engineering Data for further details.
Inrush current
150 A (60 Hz, 1 cycle)
220 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
220 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
220 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
440 A (60 Hz, 1 cycle)
Power Solid-state Relay G3PA-(VD)
J-23


3Pages


G3PA-VD 電子部品, 半導体
I Replacement Procedure
G32A-A10(L)-VD/G32A-A20(L)-VD/G32-A420-VD(-2)
Use the special tool (provided) to extract the cartridge for replacement with a new one.
Extraction
Follow the procedures belo w to dismount the P ower De vice Car-
tridge from the G3PA.
1. Switch off the power.
2. Remove the terminal cover.
3. Hook the indented par t of the car tridge with the tool and pull up
on the cartridge to remove it.
Remover
Hook here with
Remover.
Apply silicone grease here.
2. Make sure that there is no dust or pieces of wire on the heat radi-
ator of the G32A-A or the G3PA.
3. Insert the car tridge into the opening of the G3P A so that the let-
ters on the car tridge and those on the G3P A are in the same
direction and side A and side B are even.
Side A
Side B
Mounting
Follow the procedures belo w to mount the P ower Device Car tridge
on the G3PA.
1. Apply silicone g rease (pro vided with the G32A-A) to the entire
surface of the heat radiator.
4. Attach the terminal cover.
5. Switch on the po wer and chec k the G3P A to be sure it w orks
properly.
G32A-A40(L)-VD/G32A-A60(L)-VD/G32A-A430-VD(-2)/G32A-A450-VD-2
The G32A Power Device Cartridge is mounted and secured with screws to the G3PA Unit.
Extraction
Follow the procedures below to dismount the G32A-A Power Device
Cartridge from the G3PA.
1. Switch off the power.
2. Remove the terminal cover.
3. Loosen the two centered screws on the sides to dismount the car-
tridge. The screws are connected to terminals 1 and 2.
Mounting
1. Apply silicone grease to the entire surface of the heat radiator.
Loosen
Loosen
4. Loosen the screws on both the corners.
Apply silicone grease here.
2. Make sure that there is no dust or pieces of wire on the radiator of
the G32A-A or the G3PA.
Loosen
Loosen
5. Hold the indented part of both the corners to dismount the car-
tridge.
J-26 Power Solid-state Relay G3PA-(VD)

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ G3PA-VD データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
G3PA-VD

Extremely Thin Relays Integrated

OMRON
OMRON


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap