|
|
PDF E3Z-G Data sheet ( Hoja de datos )
| Número de pieza | E3Z-G | |
| Descripción | Grooved Design Eliminates Optical Axis Adjustment | |
| Fabricantes | OMRON | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de E3Z-G (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Grooved-type Photoelectric Sensor with Built-in Amplifier
E3Z-G
Grooved Design Eliminates Optical
Axis Adjustment
• One- and two-axis models available.
• Provides mutual interference prevention and EN standard
compliance.
CSM_E3Z-G_DS_E_5_1
Be sure to read Safety Precautions on
page 4.
Ordering Information
Sensors (Refer to Dimensions on page 4.)
Sensing
method
Appearance Connection method
Sensing distance
No. of opti-
cal axes
Infrared light
Model
NPN output
PNP output
Through-beam
Pre-wired (2 m)
Pre-wired Connector
(M8, 4 pins)
Pre-wired (2 m)
Pre-wired Connector
(M8, 4 pins)
E3Z-G61 2M *
E3Z-G81 2M
1
E3Z-G61-M3J 0.3M E3Z-G81-M3J 0.3M
25 mm
E3Z-G62 2M *
E3Z-G82 2M
2
E3Z-G62-M3J 0.3M E3Z-G82-M3J 0.3M
Note: Models with a 0.5-m cable are available. When ordering, specify the cable length by adding the code "0.5M" to the model number (e.g., E3Z-G61 0.5M).
* The following table shows the model numbers of e-CON Pre-wired Connectors that are available. The Ratings and Specifications are the same as those for the E3Z-
G61/G62.
No. of optical
axes
Cable length
Model
0.3 m E3Z-G61-ECON 0.3M
1 axis
0.5 m E3Z-G61-ECON 0.5M
2 m E3Z-G61-ECON 2M
0.3 m E3Z-G62-ECON 0.3M
2 axes
0.5 m E3Z-G62-ECON 0.5M
2 m E3Z-G62-ECON 2M
Accessories (Order Separately)
Sensor I/O Connectors (Refer to Dimensions on XS3.)
Cable specification
Appearance
Standard cable
Straight
L-shape
Note: Refer to Introduction to Sensor I/O Connectors for details.
Type of cable
2m
5m
4-wire
2m
5m
Protective Bracket (Refer to Dimensions on E39-L/F39-L/E39-S/E39-R)
Appearance
Model
Applicable model
Model
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
E39-L149
E3Z-G
http://www.Datasheet4U.com
1
1 page  
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
2009.5
In the interest of product improvement, specifications are subject to change without notice.
(c)Copyright OMRON Corporation 2009 All Right Reserved.
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet E3Z-G.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| E3Z-D61 | Photoelectric Sensor | OMRON |
| E3Z-D61-M1J | Photoelectric Sensor | OMRON |
| E3Z-D61-M3J | Photoelectric Sensor | OMRON |
| E3Z-D61-M5J | Photoelectric Sensor | OMRON |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |