DataSheet.jp

GP-MF802 の電気的特性と機能

GP-MF802のメーカーはPanasonicです、この部品の機能は「Industrial Camera Service Manual」です。


製品の詳細 ( Datasheet PDF )

部品番号 GP-MF802
部品説明 Industrial Camera Service Manual
メーカ Panasonic
ロゴ Panasonic ロゴ 




このページの下部にプレビューとGP-MF802ダウンロード(pdfファイル)リンクがあります。

Total 21 pages

No Preview Available !

GP-MF802 Datasheet, GP-MF802 PDF,ピン配置, 機能
ORDER NO. AVS9705028C1
D0
Industrial Camera
GP-MF802
Camera Cable : Option
Lens :
Option
SPECIFICATIONS
Pick-up Device :
Image Size :
Synchronization :
External Reset :
Horizontal Resolution :
Minimum Illumination :
Signal to Noise Ratio :
Electronic Shutter :
Lens Mount :
Vibration Resistance :
Shock Resistance :
Power Source :
Ambient Temperature :
Progressive Scanning Interline Transfer CCD with 659 (H) x 494 (V) pixels.
1/3” (6.3 (H) x 6.4 (V) mm)
2 : 1 interlace 1-line interlace (Frame accumulation)
2 : 1 interlace 2-line interlace (Field accumulation)
2-line sequential (at non-interlaced external HD/VD)
internal or external (Selectable automatically)
Internal : Built-in sync generator
External : 4.0 V[p-p] / 75 Horizontal drive and vertical drive pulses for 2 : 1 interlace or sequential
scanning
External signal (4.0 V[p-p]/75 , negative) supplied to EXT VD IN connector can be used as reset sig -
nal
480 lines at center
6.5 lx (0.65 footcandles ) at F1.4, (Manual Gain Max, γ ON, 2 : 1 interlace, without shutter)
56 dB Typical (Fix Gain, γ OFF, 2:1 interlace without shutter)
7-step (1/100 to 1/8,000) at normal.
4-step (1/2,000 to 1/16,000) at Shutter Trigger-A.
Approx. 1/2,000 at Shutter Trigger-B.
C-mount
8 G (10 Hz - 150 Hz), (2 hours each for three axes)(IEC 68)
80 G (IEC 68) *IEC=International Electrotechnical Commission
12V DC, 190 mA
10˚C - +50˚C (14˚F - 122˚F)
C1997 Matsushita Communication Industrial Co., Ltd.
All rights reserved. Unauthorized copying and
R distribution is a violation of law.
http://www.Datasheet4U.com

1 Page





GP-MF802 pdf, ピン配列
CONTENTS
Major Operating Controls and Their Functions ...................................................................................................... 1
Circuit Description
IC Description ......................................................................................................................................................... 5
Adjustment Procedure .............................................................................................................................................. 9
Appearance of ICs, Transistors and Diodes ........................................................................................................... 14
Location of Test Points and Adjusting Controls .................................................................................................... 15
Chip Components ...................................................................................................................................................... 16
Block Diagram............................................................................................................................................................ 17
Schematic Diagram
Drive Board ............................................................................................................................................................. 18
Power Board .......................................................................................................................................................... 21
Rear Board ............................................................................................................................................................ 22
Sensor Board .......................................................................................................................................................... 25
Conductor View
Drive Board ............................................................................................................................................................. 19
Power Board ........................................................................................................................................................... 20
Rear Board ............................................................................................................................................................ 23
Sensor Board .......................................................................................................................................................... 24
Exploded View ........................................................................................................................................................... 26
Replacement Parts List ............................................................................................................................................ 27


3Pages


GP-MF802 電子部品, 半導体
PREPARATIONS
1. Power Supply for Camera
Prepare a regulated DC power supply of 12 V ±
190 mA or more, and rated CLASS 2.
10 %,
2. Lenses
Be sure to use an optional manual iris lens that meets
the following items.
Focus :
Adjustable
Lens Weight : Less than 300 g (0.66 lbs.)
Note: If the lens weight exceed 300 g (0.66 lbs.), the
camera and lens should be secured.
Mount : C-mount
Lens mount should be as
shown in the diagram, other-
wise the lens will damage the
camera.
Less than 8 mm
(Less than 5/16”)
3. Switch Cover Removal
Caution: The following preparations should be made by
a qualified service person or system installer.
To set switch 1, 2, 3, 4, 5, 6, 7, 8, 9 or 10, remove the
switch cover fixing screw on the rear panel as shown
below.
Switch Cover
12P
Remove the Switch
Cover Fixing Screw.
SYSTEM CONNECTIONS
Caution: Set the power switches of all units to OFF before connection.
1. Connect the optional camera cable GP-CA81 between the connector of this camera and the 12V DC Class 2 power supply (not
provided as an accessory).
2. Connect the video connector of the GP-CA81 to the video monitor.
Camera
GP-MF 802
GP-CA81
VIDEO OUT 1
VIDEO OUT 2
Video Monitor
VIDEO
IN OUT 75
Hi-Z
Video Monitor
VIDEO
IN OUT 75
12V DC POWER
Hi-Z
VD IN
HD/VS IN
CLOCK
GND
Caution: Use a 12V DC Class 2
Power Supply only.
3

6 Page



ページ 合計 : 21 ページ
 
PDF
ダウンロード
[ GP-MF802 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
GP-MF802

Industrial Camera Service Manual

Panasonic
Panasonic


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap