|
|
PT-F100NTUのメーカーはPanasonicです、この部品の機能は「LCD Projector Service Manual」です。 |
部品番号 | PT-F100NTU |
| |
部品説明 | LCD Projector Service Manual | ||
メーカ | Panasonic | ||
ロゴ | |||
このページの下部にプレビューとPT-F100NTUダウンロード(pdfファイル)リンクがあります。 Total 30 pages
ORDER NO. VED0704376C0
D10
LCD Projector
PT-F100NTU
PT-F100NTE
PT-F100NTEA
PT-F100U
PT-F100E
PT-F100EA
© 2007 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
Free Datasheet http://www.Datasheet4U.com
1 Page PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
3
Free Datasheet http://www.Datasheet4U.com
3Pages PT-F100NTU / PT-F100NTE / PT-F100NTEA / PT-F100U / PT-F100E / PT-F100EA
2 Ext Option
This projector has EXT OPTION in addition to standard on-screen menus.
· There are SELF CHECK and TEST PATTERN for service, etc.
2.1. Procedure to enter EXT OPTION
1. Press "MENU" button on the main unit or remote control unit to display "MENU" screen, then select "OPTION" and press
"ENTER" button.
2. Select "INPUT GUIDE" on "OPTION" menu and press "ENTER" button 3 seconds or longer.
MENU → OPTION → INPUT GUIDE
2.2. EXT OPTION Menu and Functions
· FREEZE MESSAGE
Switching ON/OFF "FREEZE" on-screen display
· FAN FULL MODE
Setting the cooling fan motor rotation speed
− Switching ON "FAN FULL MODE", the rotation level of the fan becomes high-speed rotation (fixed). Moreover, when "FAN
FULL MODE" is ON, changing "HIGHLAND" in OPTION becomes impossible (setting "FAN FULL MODE" is given priority
more than "HIGHLAND").
· AUTOSETUP
Setting AUTO SETUP mode
− STANDARD: To set the normal mode (the dot clock is adjusted strictly))
− SPECIAL: To set the special mode (the dot clock is adjusted roughly)
Note:
− Do not change the initial setting (STANDARD).
· SYNC
Setting SYNC processing mode
− STANDARD: To set the normal mode
− SPECIAL: To set the special mode (noise reduction mode)
Note:
− Do not change the setting when it is possible to receive normally.
Change the setting only when the image is not displayed normally because of the sync signal noise of connected
equipment.
· VGA60/480p
− AUTO: Switching RGB of VGA60 and 480p automatically
− VGA60: Inputting signals in 59.9Hz / VGA480
− 480p: Inputting signals in RGB of 480p
· HPLL
When non-standard signal of VIDEO/S-VIDEO is inputted (VTR, VHD, etc.), horizontal synchronization might be disordered
6
Free Datasheet http://www.Datasheet4U.com
6 Page | |||
ページ | 合計 : 30 ページ | ||
|
PDF ダウンロード | [ PT-F100NTU データシート.PDF ] |
データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 |
部品番号 | 部品説明 | メーカ |
PT-F100NTE | LCD Projector Service Manual | Panasonic |
PT-F100NTEA | LCD Projector Service Manual | Panasonic |
PT-F100NTU | LCD Projector Service Manual | Panasonic |