DataSheet.jp

N150X1-L02 の電気的特性と機能

N150X1-L02のメーカーはChi Meiです、この部品の機能は「TFT LCD Module」です。


製品の詳細 ( Datasheet PDF )

部品番号 N150X1-L02
部品説明 TFT LCD Module
メーカ Chi Mei
ロゴ Chi Mei ロゴ 




このページの下部にプレビューとN150X1-L02ダウンロード(pdfファイル)リンクがあります。
Total 28 pages

No Preview Available !

N150X1-L02 Datasheet, N150X1-L02 PDF,ピン配置, 機能
Issued Date: Sep. 4, 2002
Model No.: N150X1–L02
Approval
TFT LCD Approval Specification
MODEL NO.: N150X1-L02
Customer: Fujitsu Limited
Approved by:
Note:
wwwwww..jjxxllccdd..ccoomm
1 / 26
Version 3.2
http://www.Datasheet4U.com

1 Page





N150X1-L02 pdf, ピン配列
Issued Date: Sep. 4, 2002
Model No.: N150X1–L02
Approval
REVISION HISTORY
Version
Date
Section
Description
Ver 0.0
Ver 1.0
Ver 3.0
Oct.19,’02
All Tentative Specification was first issued.
Jul. 2,’02
All Spec. was revised to preliminary 1.0 version.
Aug.13’02
All Page 2 - CONTENTS
Add “1.5 mechanical specification” & “3.3 EDID data”
Page 5 – 1.5 MECHANICAL SPECIFICATIONS
Modify item 1.5 mechanical specification:
Add Depth “min. 6.4” & “max. 7.0”
Weight typ. 590 instead of 610; max. 605 instead 615
Add connector mounting position drawing
Page 7 – 2.2 ELECTRICAL ABSOLUTE RATINGS
Modify the note of 2.2.2 BACKLIGHT UNIT to be “(1), (2), IL = 6.0 mA”
Page 9 – 3.2 BACKLIGHT UNIT
add lamp input voltage “min.612”, “typ.680”; “max.748” and IL=”6.0”mA
Modify lamp current “min. 2.0” instead of “3.0”; “typ. 6.0” instead of “6.5”; “max.
6.5” instead of “7.0”
Revise lamp turn on voltage “max.1150(25)” instead of “typ.1080(25)
Revise lamp turn on voltage “max.1500(0)” instead of “typ.1290(0)
Modify operating frequency “max 80” instead of “max.67”
wwwwww..jjxxllccdd..ccoommAdd lamp life time to be “typ. 15,000”
Revise power consumption “typ. 4.08” instead of “typ. 4.2” & note revised to be
”(4), IL = 6.0 mA”
Note (5) The lifetime of lamp can be defined as the time in which it
continues to operate under the condition Ta = 25 ±2 oC and IL = 6.0 mArms
until one of the following events occurs:
Page 10 ~ 12 – 3.3 EDID DATA
Add 3.3 EDID data in Page 10 ~ 12
Page 16 – 6. INTERFACE TIMING
6.1 Input Signal Timing Specification
Add DCLK frequence min. 20 & max. 68
Revise frame time cycle “min 771” instead of “min 770”; “max 850” instead of
“max 1000”
Page 18 – 6.2 POWER ON/OFF SEQUENCE
Timing Specifications:
0 < t1 10 msec
0 < t2 50 msec
0 < t3 50 msec
t4 200 msec
t5 200 msec
t6 5 msec
Version
Date
Section
Description
3 / 26
Version 3.2
http://www.Datasheet4U.com


3Pages


N150X1-L02 電子部品, 半導体
Issued Date: Sep. 4, 2002
Model No.: N150X1–L02
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- 200
- 2.0
Note (1) Temperature and relative humidity range is shown in the figure below.
(a) 90 %RH Max. (Ta 40 º )
(b) Wet-bulb temperature should be 39 º Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel surface should be 0 ºC Min. and 60 ºC Max.
Note (3) 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 Hz, 0.5 Hr / cycle, 4 cycles for each X, Y, Z.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
At Room Temperature
LCD Module
Side Mount Fixing Screw
Side Mount Fixing Screw
Stage
Gap=2mm
Bracket
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
wwwwww..jjxxllccdd..ccoommthe module would not be twisted or bent by the fixture. The gap between panel and testing table
should be less then 2mm.
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
5 Storage Range
-40 -20
0 20 40
Temperature (ºC)
6 / 26
60 80
Version 3.2
http://www.Datasheet4U.com

6 Page



ページ 合計 : 28 ページ
 
PDF
ダウンロード
[ N150X1-L02 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
N150X1-L02

TFT LCD Module

Chi Mei
Chi Mei
N150X1-L03

TFT LCD Module

CMI MEI
CMI MEI
N150X1-L05

TFT LCD Module

CMI MEI
CMI MEI


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap