DataSheet.jp

AHE28XXS の電気的特性と機能

AHE28XXSのメーカーはIRFです、この部品の機能は「HYBRID-HIGH RELIABILITY DC/DC CONVERTER」です。


製品の詳細 ( Datasheet PDF )

部品番号 AHE28XXS
部品説明 HYBRID-HIGH RELIABILITY DC/DC CONVERTER
メーカ IRF
ロゴ IRF ロゴ 




このページの下部にプレビューとAHE28XXSダウンロード(pdfファイル)リンクがあります。
Total 8 pages

No Preview Available !

AHE28XXS Datasheet, AHE28XXS PDF,ピン配置, 機能
PD-94554B
HYBRID-HIGH RELIABILITY
DC/DC CONVERTER
Description
The AHE28XXS Series of DC/DC converters feature
high power density and an extended temperature range
for use in military and industrial applications. Designed
to MIL-STD-704D input requirements, these devices
have nominal 28VDC inputs with +5V, +12V and +15V
single outputs to satisfy a wide range of requirements.
The circuit design incorporates a pulse width modulated
push-pull topology operating in the feed-forward mode
at a nominal switching frequency of 250KHz. Input to
output isolation is achieved through the use of
transformers in the forward and feedback circuits.
The advanced feedback design provides fast loop
response for superior line and load transient
characteristics and offers greater reliability and radiation
tolerance than devices incorporating optical feedback
circuits.
Three standard temperature grades are offered with
screening options. Refer to Part Number section. They
can be provided in a standard plug-in package for PC
mounting or in a flanged package for more severe
environments.
Manufactured in a facility fully qualified to MIL-PRF-
38534, these converters are fabricated utilizing DSCC
qualified processes. For available screening options,
refer to device screening table in the data sheet. Variations
in electrical, mechanical and screening can be
accommodated. Extensive computer simulation using
complex modeling enables rapid design modification
to be provided. Contact IR Santa Clara with specific
requirements.
AHE28XXS SERIES
28V Input, Single Output
AHE
Features
n 17V to 40VDC Input Range (28VDC Nominal)
n 5V, 12V and 15V Outputs Available
n Indefinite Short Circuit and Overload Protection
n 17 W/in3 Power Density
n 15W and 20W Output Power Models
n Fast Loop Response for Superior Transient
Characteristics
n Operating Temperature Range from -55°C to
+125°C Available
n Popular Industry Standard Pin-Out
n Resistance Seam Welded Case for Superior
Long Term Hermeticity
n Efficiencies up to 84%
n Shutdown from External Signal
n Military Screening
n 325,000 hour MTBF at 85°C (AUC)
n Standard Microcircuit Drawings Available
www.irf.com
1
01/08/07
http://www.Datasheet4U.com

1 Page





AHE28XXS pdf, ピン配列
AHE28XXS Series
Specifications
TCASE = -55°C to +105°C, VIN = +28V ± 5% unless otherwise specified
Absolute Maximum Ratings
Input Voltage 5
Power Output
-0.5V to +50VDC
Internally limited, 17.5W typ. for AHE2805S/ES, 22.5W typ. for AHE2812S/ES and AHE2815S/ES
Soldering Temperature 300°C for 10 seconds
Temperature Range 1 Operating Temperature
-55°C to +125°C
Storage Case Temperature -65°C to +135°C
Parameter
Conditions
-55°C Tc +105°C
Vin = 28 Vdc ±5%,CL = 0
Unless otherwise specified
AHE2805S/ES
AHE2812S/ES
AHE2815S/ES
Static Characteristic
Min Typ Max Min Typ Max Min Typ Max
Units
OUTPUT
Voltage
Current
Ripple
Accuracy
Power1
REGULATION
Line
Load
INPUT
Voltage Range4
Current
Ripple Current
Efficiency
Capacitive Load
Load fault power
dissipation4
Isolation
Dynamic
Characteristic
Step Load Changes
Output
Transient
Recovery2
Step Line Changes
VIN=17 to 40 VDC
IOUT=0 to Full Load
Full Load, DC to 1MHz
TCASE = 25°C, IOUT = 0
VIN = 17 to 40 VDC
IOUT = 0 to Full Load
Inhibited
No Load
Full Load
TCASE = +25°C
Half load to Full load
No effect on performance
Input to Output @ 500Vdc
50% Load 100% Load
No Load 50% Load
50% Load No Load
50% Load 100% Load
No Load 50% Load
50% Load No Load
4.90 5.00 5.10 11.76 12.00 12.24 14.70 15.00 15.30 VDC
0.0
3000
0.0
1667
0.0
1333 mADC
20 60
30 60
30 60 mVp-p
4.95 5.00 5.05 11.88 12.00 12.12 14.85 15.00 15.15 VDC
15 20 20 W
±0.5 ±1.0
±0.5 ±1.0
±0.5 ±1.0
±0.5 ±1.0
±0.5 ±1.0 %
±0.5 ±1.0
17 28 40 17 28 40 17 28 40 VDC
8.0 18
8.0 18
8.0 18 mADC
35 35 35 mADC
20 50
25 50
25 50 mV p-p
78 82
500
79 83
200
80 84
200
%
µF
6.0 6.0 6.0 W
100 100 100 M
±150
-300
+300
25
500
7.0
±200
-400
+400
25
500
7.0
±200
-400
+400
25
500
7.0
mVpk
mVpk
mVpk
µs
µs
ms
Output
Transient
Recovery2
TURN –ON
Overshoot
Delay3
Input step 17 to 40VDC
Input step 40 to 17VDC
Input step 17 to 40VDC
Input step 40 to 17VDC
VIN = 17 to 40VDC
IOUT = 0 to Full Load
+180
-600
400
400
0
8.0
500
14
+180
-600
400
400
300
8.0
600
14
+180
-600
400
400
300
8.0
mVpk
mVpk
µs
µs
750 mVpk
14 ms
Load Fault Recovery4
Weight
VIN = 17 to 40VDC
Standard Package
Flange Package
8.0 14
60
65
8.0 14
60
65
8.0 14 ms
60 g
65
Notes to Specifications
1. Above +105°C case temperature, derate output power linearly to 0 at 125°C case.
2.
Recovery time is measured
See typical waveforms.
from
the
initiation
of
the
transient
to
where
VOUT
has
returned
to
within
±1.0%
of
VOUT
at
50%
load.
3. Turn-on delay time measurement is for either an application of power at the input or a signal at the shutdown pin.
4. For operation at 16VDC, derate output power by 33%.
5. Above +85°C case temperature, derate maximum input voltage linearly to 33V at +125°C case.
www.irf.com
3
http://www.Datasheet4U.com


3Pages


AHE28XXS 電子部品, 半導体
AHE28XXS Series
To take advantage of this capability, the system designer
must assign one of the converters as the master. Then,
by definition, the remaining converters become slaves and
will operate at the masters’ switching frequency.
The user should be aware that the synchronization system
is fail-safe; that is, the slaves will continue operating should
the master frequency be interrupted for any reason. The
layout must be such that the synchronization output (pin9)
of the master device is connected to the synchronization
input (pin 9) of each slave device. It is advisable to keep
this run short to minimize the possibility of radiating the
250KHz switching frequency.
The appropriate parts must be ordered to utilize this
feature. After selecting the converters required for the
system, a MSTR suffix is added for the master converter
part number and a SLV suffix is added for slave part number.
See Part Number section.
Standard Microcircuit Drawing Equivalence Table
Standard Microcircuit
Drawing Number
5962-89683
5962-91580
5962-91625
Vendor Cage
Code
52467
52467
52467
IR Standard
Part Number
AHE2805S
AHE2812S
AHE2815S
6 www.irf.com
http://www.Datasheet4U.com

6 Page



ページ 合計 : 8 ページ
 
PDF
ダウンロード
[ AHE28XXS データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
AHE28xxD

HYBRID-HIGH RELIABILITY DC/DC CONVERTER

International Rectifier
International Rectifier
AHE28XXS

HYBRID-HIGH RELIABILITY DC/DC CONVERTER

IRF
IRF
AHE28xxS

ADVANCED ANALOG HYBRID-HIGH RELIABILITY DC/DC CONVERTERS

International Rectifier
International Rectifier


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap