DataSheet.jp

TS003 の電気的特性と機能

TS003のメーカーはhagerです、この部品の機能は「3 channel remote telephone interface」です。


製品の詳細 ( Datasheet PDF )

部品番号 TS003
部品説明 3 channel remote telephone interface
メーカ hager
ロゴ hager ロゴ 




このページの下部にプレビューとTS003ダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

TS003 Datasheet, TS003 PDF,ピン配置, 機能
line connection
FDEItranealguinaltiçnssacohihs
TS 003
OFF
ON
OFF
ON C2
OFF
ON
C3
reset
C1
User instructions GB
3 channel remote telephone
interface with voice guide.
Analogue line equipment
Declaration of conformity :
We, Hager Electro S.A, 132 Boulevard de lEurope
67215 Obernai Cedex, hereby declare under our own
responsibility that the products dealt with by these
instructions satisfy all essential demands linked to the
R&TTE 1999/5/CE Directive dated March 1999.
The BA Controls Quality Manager/ 01-01
TS 003
Product presentation:
The TS003 is a 3 canal telephone remote
control with voice guide.
The TS003 provides ON/OFF commands
for three different electric circuits (ligh-
ting, heating, household appliances,
watering, alarm systems, window blinds,
etc.) from any touch-tone telephone, to
suit your requirements..
A 4 digit secret code, known only by the
persons of your choice, allows you to
limit access to TS003.
TS003 is equipped with a voice guide
system to help you make your selections.
Function:
Generalities
When pressing on your telephone
buttons your telephone transmits a tone,
it is then a vocal frequency telephone.
In the absence of a touche tone facility,
a TU001 coding device with voice guide
will still allow the use of your phone
remote control.
The telephone remote control can be
commanded from GSM portable
telephones and without the need of a
TU001.
TS 003
1 line connection
2
français
deutsch
english
italiano
-
-
-
-
on off
on off
on off
3 reset
C1 C2 C3
4
5
On-line indicator light.
Circuit operation indicator light.
Manual control push-buttons.
Language selection cursor.
Reset 4 digit secret code to factory
settings.
Enter your secret code (PIN):
The telephone remote control is equipped with a
factory setting code : 0000.
Personalise your secret code:
1. Dial your telephone number the TS003 answers
after 6 or 7 rings ands asks your access (secret)
code (PIN)
2. Enter the factory setting code : 0000.
3. Press the button on your telephone, the
TS003 voice guide will guide you through the
instructions.
TS003 confirms your code (PIN).
(If you make 3 mistakes in entering your code
(PIN), TS003 hangs up. You can then call back
and try again).
4. Hang up.
In case you have forgotten or want to change your
code, please press the reset button, TS003 resets
the factory setting code (PIN) 0000.
Remote control :
A. To turn a circuit ON or OFF :
1. Call your telephone number
TS003 answers after 6 or 7 rings, and asks you
for your access code (PIN).
2. Enter your 4 digit secret code.
The TS003 welcome message tells you if each of
the 3 circuits (1, 2 and 3 in order) is ON, OFF or
set for timed switch-off.
3. Follow the voice-guide instructions to turn the
circuits ON or OFF or hang up.
You can change the setting for a circuit, without
listening to the whole message, by holding down
key 1, 2, 3, depending on which circuit you want
to change the setting for (circuit 1, 2, 3).
B. To program a circuit for timed switch-off
You can program each of the circuits to switch
off automatically after 1 to 100 hours, in 1 hour
increments. In this case, you only turn the circuit
ON, it will switch-off automatically at the end of
the programmed time period.
1. Call your telephone number.
TS003 answers after 6 or 7 rings, and asks you
for your access code (PIN).
2. Enter your 4 digit secret code.
3. Press the button and TS003 will guide you
Choose the circuit you want a timed switch-off
for, and program the duration of delay before
switch off.
4. Press button in order to switch ON the circuit
of your choice.
Voice Guide
Position the cursor in front of the
language of your choice (the choices
are French, German, English, Italian).
français -
deutsch -
english -
italiano -
After this configuration the circuit is always pro-
grammed for timed switch-off.
You can cancel the timer by following the above
mentioned steps and by entering a duration of
delay of 0 hrs.
The circuit will return to the configuration ON or
OFF.
To control your circuits manually
Press the ON or the OFF button corres-
ponding to the circuit you want to turn ON
or OFF, on the main unit. If the circuit is
programmed for timed switch-off, pressing
the ON button starts the timer.
Using TS003 with a telephone answering
machine
If TS003 is installed on the same line as an
answering machine, a fax or a modem.
1. call your telephone number.
2. hang up after the first ring.
3. Wait for 10 sec.
4. Then call back within 3 min 30 sec.
TS003 answers at the first ring.
In case of a power failure
Your access code (PIN) and the circuit
programs are stored in the memory.
Any pre-programmed delay before switch-
off may be delayed by as much as one hour.
Technical specifications :
Electrical characteristics :
- supply voltage : 230 VƂ +10/-15%
50/60 Hz
- consumption : < 4 VA
- output : 3 changeover contact
voltfree contact
max : 5 A / 250 VƂ AC1
mini : 100 mA - 12 V
Environment
- Operating temperature -10 °C to +50 °C
- Storage temperature : -20 °C to +60 °C
Connection
- capacity : flexible : 1 to 2,5
rigid : 1 to 4
Warranty
GB
A warranty period of 24 months is offered on hager products,
from date of manufacture, relating to any material of manu-
facturing defect. If any product is found to be defective it must
be returned via the installer and supplier (wholesaler). The
warranty is withdrawn if :
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary to
IEE wiring regulations and accepted practice within the indus-
try at the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning
goods.
Free Datasheet http://www.Datasheet4U.com

1 Page





TS003 pdf, ピン配列
line connection
FDEItranealguinaltiçnssacohihs
TS 003
OFF
ON
reset
OFF
ON C3
OFF
ON C2
C1
Käyttöohje FIN
3-kanavainen puhelinohjaus-
yksikkö ääniopastuksella
Analogue line equipment
Declaration of conformity :
We, Hager Electro S.A, 132 Boulevard de lEurope
67215 Obernai Cedex, hereby declare under our own
responsibility that the products dealt with by these
instructions satisfy all essential demands linked to the
R&TTE 1999/5/CE Directive dated March 1999.
The BA Controls Quality Manager/ 01-01
TS 003
Tuote-esittely:
TS 003 on 3-kanavainen puhelinohjausyksikkö
ääniopastuksella.
TS 003 antaa on/off käskyt kolmelle eri kuor-
malle (valaistus, lämmitys, kodinkoneet, vesi,
hälytysjärjestelmät, verhot, jne) mistä tahansa
äänivalintapuhelimesta, vaatimuksiesi mukaan.
4-numeroinen turvakoodi, joka on vain
haluttujen ihmisten tiedossa, luo mahdol-
lisuuden rajattuun TS 003:n käyttöön.
TS 003 on varustettu toimintojen äänio-
pastuksella, joka helpottaa valintojen
tekemisessä.
Toiminta:
Kun puhelimesi antaa kuulokkeeseen
äänen painettaessa painiketta, on se
äänitaajuus puhelin. Mikäli puhelimessasi
ei ole äänitoimintoa, TU 001 koodauslaite
ääniopastuksella mahdollistaa
puhelinkauko-ohjauksen.
Puhelinkauko-ohjausta voidaan ohjata
kannettavasta gsm-puhelimesta ilman
TU 001:stä.
TS 003
1 line connection
2
français -
deutsch -
english -
italiano -
on off
on off
on off
3 reset
C1 C2 C3
4
5
On-line indikaattori.
Piirin toimintaindikaattori.
Käsiohjauspainikkeet.
Kielen valintakytkin.
Turvakoodin nollaus tehdasasetuksiin.
Ääniopastus
Voit valita opastuskielen etupaneelin
kytkimestä (ranska, saksa, englanti, italia)
français -
deutsch -
english -
italiano -
Turvakoodin syöttö (PIN):
Puhelinohjausyksikköön on tehtaalla asetettu
oletuskoodiksi: 0000.
Oma turvakoodi:
1. Valitse puhelinnumerosi, TS 003 vastaa 6 tai 7
soiton jälkeen ja kysyy turvakoodia (PIN)
2. Syötä tehtaan asettelema koodi: 0000.
3. Paina painiketta puhelimestasi, TS 003 äänio-
pastus neuvoo sinulle ohjeet valitsemallasi
kielellä.
TS 003 vahvistaa koodisi (PIN).
Jos syötät koodisi (PIN) kolmesti (3) väärin,
TS 003 sulkee linjan. Voit soittaa ja yrittää
uudelleen.
4. Sulje puhelin.
Jos olet unohtanut koodisi tai haluat muuttaa sitä,
paina reset -painiketta, tällöin TS 003 ottaa tehda-
sasettelun oletuskoodin (PIN) käyttöön: 0000.
Kauko-ohjaus:
A. On/off -ohjaus:
1. Soita puhelinnumeroosi.
TS 003 vastaa 6 tai 7 soiton jälkeen ja kysyy
turvakoodiasi (PIN).
2. Syötä 4-numeroinen koodisi (Jos syötät koodisi
(PIN) kolmesti (3) väärin, TS 003 sulkee linjan ja
sinun pitää soittaa uudelleen).
TS 003 tervetuloviesti kertoo kaikkien piirien
kytkentätiedot järjestyksessä (on/off tai ajastettu
poiskytkentä).
3. Seuraa ääniopastusta kytkeäksesi piirejä päälle
tai pois (on/off) tai sulje puhelin.
Voit muuttaa piirin ohjausta kuuntelematta koko
viestiä pitämällä painiketta 1, 2 tai 3 painettuna
riippuen siitä minkä piirin tilaa haluat muuttaa
(piirit 1, 2, 3).
B. Ajastetun poiskytkennän asettelu
Voit ohjelmoida jokaisen piirin kytkeytymään pois
(off) automaattisesti 1-100 tunnissa, 1 tunnin
tarkkuudella. Tässä tapauksessa kytket vain piirin
päälle (on) ja se kytkeytyy automaattisesti asetellun
ajan jälkeen pois (off).
1. Soita puhelinnumeroosi.
TS 003 vastaa 6 tai 7 soiton jälkeen ja kysyy
turvakoodiasi (PIN).
2. Syötä 4-numeroinen turvakoodisi.
3. Paina painiketta ja TS 003 opastaa sinua
eteenpäin.
Valitse piiri, jonka haluat kytkeä pois (off) ja syötä
viiveen kesto ennen poiskytkentää.
4. Paina pyydettäessä valitsemasi piirin päälle
kytkemiseksi (on).
Näiden asettelujen jälkeen piirissä on aina ajastettu
poiskytkentä.
Voit perua ajastimen asettelun piirille syöttämällä
edellämainitulla tavalla viiveeksi 0 tuntia.
Piiri palautuu asetteluun ON/OFF.
Piirien käsiohjaus
Paina joko ON tai OFF -painiketta haluamasi
piirin kohdalta muuttaaksesi piirin
päälle/pois (on/off). Jos piiriin on ohjelmoitu
ajastettu poiskytkentä, painikkeen ON
painaminen käynnistää laskurin.
TS 003 käyttö vastaajan kanssa
Jos TS 003 on asennettu samaan linjaan
vastaajan, faksin tai modeemin kanssa:
soita puhelinnumeroosi ja sulje puhelu
ensimmäisen soiton jälkeen. Soita uudelleen
3 minuutin 30 sekunnin kuluessa.
TS 003 vastaa ensimmäiseen soittoon.
Sähkökatkon sattuessa
Turvakoodisi (PIN) ja piirien ohjelmointi on
tallennettu muistiin. Mikään esiaseteltu
viivästys poiskytkennässä ei viivästy yhtä
tuntia (1) enemmän.
Tekniset tiedot:
Sähköiset tiedot:
- jännite: 230 VƂ +10/-15% 50/60 Hz
- teho : < 4 VA
- ulostulo: 3 vaihtokosketin ja
potentiaalivapaa kosketin
max : 5 A / 250 VƂ AC1
mini : 100 mA - 12 V
Lämpötilat
- Käyttölämpötila: -10 °C... +50 °C
- Varastointilämpötila: -20 °C... +60 °C
Liitäntäpoikkipinnat
- monisäikeinen: 1 - 2,5
- lanka:
1-4
Takuu
FIN
hager myöntää valmistuspäivästä lukien 24 kk:n takuun, joka
koskee kaikkia materiaali- ja valmistusvirheitä.
Jos tuote osoittautuu virheelliseksi, se täytyy palauttaa myyjälle.
Takuu ei ole voimassa, jos :
a) hagerin laadunvalvontaosasto on tarkastuksessa hava-
innut, että laite on asennettu vastoin annettuja asennusohjeita.
b) tuotetta ei ole palautettu :
huom ! kun palautatte tuotteen, olkaa hyvä ja lähettäkää sen
mukana selvitys viasta.
Free Datasheet http://www.Datasheet4U.com


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ TS003 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
TS003

3 channel remote telephone interface

hager
hager


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap