DataSheet.jp

MD120 の電気的特性と機能

MD120のメーカーはMicronです、この部品の機能は「industrial and commercial process and control systems」です。


製品の詳細 ( Datasheet PDF )

部品番号 MD120
部品説明 industrial and commercial process and control systems
メーカ Micron
ロゴ Micron ロゴ 




このページの下部にプレビューとMD120ダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

MD120 Datasheet, MD120 PDF,ピン配置, 機能
DINergy™ MD120 SERIES
Features
Compact size, high efficiency and DIN Rail mounting
100-240VAC wide-range auto-selection input
Overcurrent, shortcircuit, and overvoltage protection
DC OK LED Indicator w/remote indicator contact
Adjustable DC output voltage
Power boost for unusual start-up loading
Parallel operation capable for power and redundancy
Safety meets UL508, UL60950 and IEC60950
CE EN61000-3-2 compliant active PFC filtering
EMI meets FCC15 B, EN55022 B and CISPR22 B
High reliability, MTBF>200,000 hrs
Operating temperature: -10°C to 70°C
3 year warranty
UL 1604 Class 1 Division 2 compliant
Applications
Micron DINergy™ units are suitable for industrial and commercial process and control systems, office facilities,
telecom equipment, mechanical equipment, transport equipment, service and building automation, and electronic
and electrical instrumentation.
Specifications
Model
Input Voltage
Input Current
Frequency
Inrush Current
Earth Leakage Current
Start-up Time
PFC/Harmonics
Rated Output
Voltage/Current
Output Pre-regulation
(Set Point)
Output Voltage
Regulation
Rated Output Current
Min. Output Current
Output Peak Current
Efficiency
Ripple & Noise
Load Regulation
MD120-12-1
0.6A/240VAC,
1.3A/110VAC
MD120-24-1
Rated 100-240VAC, 90-350VDC
Range 85-264VAC
MD120-48-1
0.7A/240VAC, 1.6A/110VAC
50-60Hz, ±6%
Typ.<15A
<3.5mA
<1S
>0.95/Meets EN61000-3-2
12VDC/8A
24VDC/5A
48VDC/2.5A
12.5±0.5%
24.5±0.5%
48.5±0.5%
10-16VDC
8-6A
0A
86%/230V
22-28VDC
5-4.3A
0A
120% of rated output current
88%/230V
<=100mV
1%
46-52VDC
2.5-2.3A
0A
88%/230V
www.micronpower.com
+1 630.516.1222
Rev: 060412
Free Datasheet http://www.0PDF.com

1 Page





MD120 pdf, ピン配列
DINergy™ MD120 SERIES
Operational and Mounting Requirements (All Metal Cased DINergy Units)
Parallel Operation to Increase Output Power
To increase output power, the outputs of the same polarity of two identical units can be paralleled
using load connection wires of the same gauge and length.
Parallel Operation for Redundancy Application
To increase reliability of the system, two units of the same model can be used for redundancy operation. In
normal state, the units each provides 50% of load current. When failure occurs on the circuit of the unit 1, the
unit 2 is able to immediately and automatically replace unit 1 to continue the operation and provides 100%
load current. The same result applies when the failure occurs on the circuit of unit 2. In this application, a
fuse or decoupling diode is added at the positive outputs of the two units.
Operating Environment
Operating temperature MDP Series: -10 to 60ºC
Operating temperature MD Series: -10 to 70ºC
Operating humidity: 5% to 90%RH, non-condensing
Storage and shipping temperature MDP Series: -25 to 85 ºC
Storage and shipping temperature MD Series: -40 to 85 ºC
Vibration: meet IEC 68-2-6
Shock: meet IEC 68-2-27
Cooling Method
MD Series
Air convection cooling is employed. From the ambient temperature of -10°C to 60°C, full rated output power
available. From 60°C to 70°C, the unit is derated at 6W/1°C, and to half load when at 70°C.
Panel
Input Terminal
1). Connect L to AC line or DC positive pole.
2). Connect N to AC neutral or DC negative pole.
3). (PE): connect to ground.
Output Terminal
1). DC OK output signal terminal
(not available on 30, 50 and 60 watt unit)
2). “+”, DC positive output terminal (two)
3). “-”, DC negative output terminal (two)
www.micronpower.com
+1 630.516.1222
Rev: 060412
Free Datasheet http://www.0PDF.com


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ MD120 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
MD120

industrial and commercial process and control systems

Micron
Micron
MD120-12-1

industrial and commercial process and control systems

Micron
Micron
MD120-24-1

industrial and commercial process and control systems

Micron
Micron
MD120-48-1

industrial and commercial process and control systems

Micron
Micron


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap