|
|
Número de pieza | AN78xx | |
Descripción | 3-pin positive output voltage regulator | |
Fabricantes | Panasonic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de AN78xx (archivo pdf) en la parte inferior de esta página. Total 10 Páginas | ||
No Preview Available ! Voltage Regulators
AN78xx/AN78xxF Series
3-pin positive output voltage regulator (1 A type)
I Overview
The AN78xx series and the AN78xxF series are 3-
pin, fixed positive output type monolithic voltage regu-
lators. Stabilized fixed output voltage is obtained from
unstable DC input voltage without using any external
components. 11 types of fixed output voltage are avail-
able; 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V, 20V, and
24V. They can be used widely in power circuits with cur-
rent capacity of up to 1A.
I Features
• No external components
• Output voltage: 5V, 6V, 7V, 8V, 9V, 10V, 12V, 15V, 18V,
20V, 24V
• Built-in overcurrent limit circuit
• Built-in thermal overload protection circuit
• Built-in ASO (area of safe operation) protection circuit
AN78xx series
(10.35)
10.0±0.3
φ3.7±0.1
Unit: mm
4.5±0.2
1.4±0.1
1.4
+0.15
–0.05
0.8
+0.15
–0.05
2.54 2.54
10.5±0.3
0.45
+0.2
–0.0
(2.0) (2.5)
1: Input
2: Common
3: Output
HSIP003-P-0000
AN78xxF series
10.50±0.30
φ5.30
(4.30)
φ3.10±0.10
Unit: mm
(1.73) 2.77±0.30
I Block Diagram
Starter
2.54
(0.40)
0.80±0.20
1.40±0.20
2.00±0.25
4.50±0.30
123
HSIP003-P-0000A
0.40+−00..1005
2.50±0.25
1: Input
2: Common
3: Output
Current
Source
Voltage
Reference
+
Error Amp.
−
Pass Tr
Current
Limiter
Thermal
Protection
1
Input
Q1
RSC
3
Output
R2
R1
2 Common
1
Free Datasheet http://www.nDatasheet.com
1 page Voltage Regulators
AN78xx/AN78xxF Series
I Electrical Characteristics at Ta = 25°C (continued)
• AN7810, 7810F (10V type)
Parameter
Symbol
Conditions
Min Typ Max Unit
Output voltage
Output voltage tolerance
Line regulation
Load regulation
Bias current
Bias current fluctuation to input
Bias current fluctuation to load
Output noise voltage
Ripple rejection ratio
Minimum input/output voltage difference
Output impedance
Output short-circuit current
Peak output current
Output voltage temperature coefficient
VO
VO
REGIN
REGL
IBias
∆IBias(IN)
∆IBias(L)
Vno
RR
VDIF(min)
ZO
IO(Short)
IO(Peak)
∆VO/Ta
Tj = 25°C
VI = 13 to 25V, IO = 5mA to 1A,
Tj = 0 to 125°C, PD ≤ *
VI = 12.5 to 27V, Tj = 25°C
VI = 13 to 19V, Tj = 25°C
IO = 5mA to 1.5A, Tj = 25°C
IO = 250 to 750mA, Tj = 25°C
Tj = 25°C
VI = 12.5 to 27V, Tj = 25°C
IO = 5mA to 1A, Tj = 25°C
f = 10Hz to 100kHz
VI = 13 to 23V, IO = 100mA, f = 120Hz
IO = 1A, Tj = 25°C
f = 1kHz
VI = 27V, Tj = 25°C
Tj = 25°C
IO = 5mA, Tj = 0 to 125°C
9.6 10
9.5
8
2.5
12
4
3.9
63
56
2
16
700
2
− 0.6
10.4 V
10.5 V
200 mV
100 mV
200 mV
100 mV
8 mA
1 mA
0.5 mA
µV
dB
V
mΩ
mA
A
mV/°C
Note 1) The specified condition Tj = 25°C means that the test should be carried out within so short a test time (within 10ms) that the
characteristic value drift due to the chip junction temperature rise can be ignored.
Note 2) Unless otherwise specified, VI = 16V, IO = 500mA, CI = 0.33µF and CO = 0.1µF.
* AN78xx series: 15W, AN78xxF series: 10.25W
• AN7812, 7812F (12V type)
Parameter
Symbol
Conditions
Min Typ Max Unit
Output voltage
Output voltage tolerance
Line regulation
Load regulation
Bias current
Bias current fluctuation to input
Bias current fluctuation to load
Output noise voltage
Ripple rejection ratio
Minimum input/output voltage difference
Output impedance
Output short-circuit current
Peak output current
Output voltage temperature coefficient
VO
VO
REGIN
REGL
IBias
∆IBias(IN)
∆IBias(L)
Vno
RR
VDIF(min)
ZO
IO(Short)
IO(Peak)
∆VO/Ta
Tj = 25°C
VI = 15 to 27V, IO = 5mA to 1A,
Tj = 0 to 125°C, PD ≤ *
VI = 14.5 to 30V, Tj = 25°C
VI = 16 to 22V, Tj = 25°C
IO = 5mA to 1.5A, Tj = 25°C
IO = 250 to 750mA, Tj = 25°C
Tj = 25°C
VI = 14.5 to 30V, Tj = 25°C
IO = 5mA to 1A, Tj = 25°C
f = 10Hz to 100kHz
VI = 15 to 25V, IO = 100mA, f = 120Hz
IO = 1A, Tj = 25°C
f = 1kHz
VI = 30V, Tj = 25°C
Tj = 25°C
IO = 5mA, Tj = 0 to 125°C
11.5 12
11.4
10
3
12
4
4
75
55
2
18
700
2
− 0.8
12.5 V
12.6 V
240 mV
120 mV
240 mV
120 mV
8 mA
1 mA
0.5 mA
µV
dB
V
mΩ
mA
A
mV/°C
Note 1) The specified condition Tj = 25°C means that the test should be carried out within so short a test time (within 10ms) that the
characteristic value drift due to the chip junction temperature rise can be ignored.
Note 2) Unless otherwise specified, VI = 19V, IO = 500mA, CI = 0.33µF and CO = 0.1µF.
* AN78xx series: 15W, AN78xxF series: 10.25W
5
Free Datasheet http://www.nDatasheet.com
5 Page |
Páginas | Total 10 Páginas | |
PDF Descargar | [ Datasheet AN78xx.PDF ] |
Número de pieza | Descripción | Fabricantes |
AN78xx | 3-pin positive output voltage regulator | Panasonic |
AN78xxF | 3-pin positive output voltage regulator | Panasonic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |