DataSheet.jp

PAB0001WFX01 の電気的特性と機能

PAB0001WFX01のメーカーはMin Huiです、この部品の機能は「LED」です。


製品の詳細 ( Datasheet PDF )

部品番号 PAB0001WFX01
部品説明 LED
メーカ Min Hui
ロゴ Min Hui ロゴ 




このページの下部にプレビューとPAB0001WFX01ダウンロード(pdfファイル)リンクがあります。
Total 3 pages

No Preview Available !

PAB0001WFX01 Datasheet, PAB0001WFX01 PDF,ピン配置, 機能
PAB0001WFX01
SPECIFICATION FOR APPROVAL
Mechanical Dimensions:
Note:
1. All dimensions are in millimeters.
2. All dimensions without tolerances are for reference only.
3. Material as follows:
Package: Heat-Resistant Polymer
Electrodes: Cu Plating Copper Alloy
Absolute Maximum Ratings (Ta = 25) :
*Pulse width0.1msec duty1/10
Typical Electrical & Optical Characteristics ( Ta = 25):
Notes:
1.Absolute maximum ratings Ta=25.
2.Tolerance of measurement of forward voltage±0.1V.
3.Tolerance of measurement of Luminous Flux ±15%.
Tel86+755+33890868
Fax86+755+33890876
Address4F-A of TheF,ChengDeXuan Industrial Park, LiSongLang Village,
Gongming Street,Shenzhen,P.R.China
http://www.chg-led.com
1/3

1 Page





PAB0001WFX01 pdf, ピン配列
Typical Representative Spatial Radiation Pattern of single LED
Reliability
1.Test Items And Results
Angular Displacement(degress)
2.Failure criteria
 Electrical Failures:
Visual Failures:
- VF shift% >10%
- IR(VR=7V)>1uA
- Broken or damaged package or lead
- Solder ability < 95% Wetting
- Dimension out of tolerance
- Discolor of lens
Note: It is required that the LEDs should be attached heat-sink when these LEDs are Operating.
Precautions For use
1. Storagre
In order to avoid absorption of moisture it is recommended thm the products are stored in the dry box (or dessicator) with a dessicant.Alternatively the tollowing
environment is
recommended: Storage temperature :5℃~30℃
Hunidity:60%HRmax
2. Any mechanical force or any ekcess vibration should be avoied daring the cooling Process after soldering.
3. Components should not be monnted on distorted Printed Ciruit Boards.
4. Devices should not be used in any type of fluid such as water,oil,organic solvents etc. When cleaning is required,IPA should be used .
5. Devices should be soldered with in 7 days after opening the moistare-proof packing.
6. ESD Precaution .Static Electrcity and surge damages LEDs.
It is recommended that wrist bands or anti-electrostatic gloves be uses when handing the LEDs.
All devices,equipment and machinery should be properly grounded.
Tel86+755+33890868
Fax86+755+33890876
Address4F-A of TheF,ChengDeXuan Industrial Park, LiSongLang Village,
Gongming Street,Shenzhen,P.R.China
http://www.chg-led.com
3/3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ PAB0001WFX01 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
PAB0001WFX01

LED

Min Hui
Min Hui


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap