DataSheet.jp

D2SW-3L1T の電気的特性と機能

D2SW-3L1TのメーカーはOmronです、この部品の機能は「Watertight Miniature Basic Switch」です。


製品の詳細 ( Datasheet PDF )

部品番号 D2SW-3L1T
部品説明 Watertight Miniature Basic Switch
メーカ Omron
ロゴ Omron ロゴ 




このページの下部にプレビューとD2SW-3L1Tダウンロード(pdfファイル)リンクがあります。

Total 6 pages

No Preview Available !

D2SW-3L1T Datasheet, D2SW-3L1T PDF,ピン配置, 機能
Watertight Miniature Basic Switch
A High-quality Watertight Miniature
Basic Switch Conforms to IP67
Monoblock construction assures high sealing
capability and is ideal for dusty places or where
water is sprayed.
A wide operating temperature range of –40°C to
85°C is ideal for any operating environment.
Ideal for the automobile, agricultural machinery,
automatic vending machine, refrigerator, ice-
manufacturing, bath equipment, hot-water supply,
air conditioner, and factory machine industries,
which require highly environment-resistive capabil-
ities.
D2SW
RC V
DE
Ordering Information
Model
Actuator
3 A 0.1A
Pin plunger
Solder terminals
D2SW-3H
D2SW-01H (see note 2)
Tab terminals (#110)
D2SW-3T
D2SW-01T
PCB terminals
D2SW-3D
D2SW-01D
With lead wires
D2SW-3M (see note 3)
D2SW-01M (see note 3)
Hinge lever
Solder terminals
D2SW-3L1H
D2SW-01L1H (see note 2)
Tab terminals (#110)
D2SW-3L1T
D2SW-01L1T
PCB terminals
D2SW-3L1D
D2SW-01L1D
With lead wires
D2SW-3L1M (see note 3) D2SW-01L1M (see note 3)
Simulated hinge lever
Solder terminals
D2SW-3L3H
D2SW-01L3H (see note 2)
Tab terminals (#110)
D2SW-3L3T
D2SW-01L3T
PCB terminals
D2SW-3L3D
D2SW-01L3D
With lead wires
D2SW-3L3M (see note 3) D2SW-01L3M (see note 3)
Hinge roller lever
Solder terminals
D2SW-3L2H
D2SW-01L2H (see note 2)
Tab terminals (#110)
D2SW-3L2T
D2SW-01L2T
PCB terminals
D2SW-3L2D
D2SW-01L2D
With lead wires
D2SW-3L2M (see note 3) D2SW-01L2M (see note 3)
Note: 1. The standard lengths of the lead wires (AV0.5f) of models incorporating them are 30 cm.
2. EN61058-1 (IEC1058-1) approved by VDE.
3. UL/CSA approved lead-wired models use UL/CSA approved lead wire. Model name changes from D2SW-jM to D2SW-jMS.
Distributed by: Diamond Electronics Ltd
Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: [email protected]
Web: www.diamondelec.co.uk
127
Free Datasheet http://www.datasheetlist.com/

1 Page





D2SW-3L1T pdf, ピン配列
D2SW
D2SW
Characteristics
Item
D2SW-3
D2SW-01
Operating speed
(see note)
0.1 mm to 1 m/s (at pin plunger)
Operating frequency
Mechanical: 300 operations/min
Electrical: 60 operations/min
Insulation resistance
Contact resistance
100 Mmin. (at 500 VDC)
50 mmax. (initial value) for lead wire models
70 mmax. (initial value) for lead wire models
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min between contacts of
the same polarity
1,500 VAC, 50/60 Hz for 1 min between
current-carrying metal parts and ground, and between
each terminal and non-current-carrying metal part
600 VAC, 50/60 Hz for 1 min between contacts
of the same polarity
1,500 VAC, 50/60 Hz for 1 min between
current-carrying metal parts and ground, and
between each terminal and non-current-carrying
metal part
Inrush current
NO: 10 A
NC: 20 A
NO: 1 A
NC: 1 A
Vibration resistance
Shock resistance
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Malfunction: 300 m/s2 (approx. 30G)
Life expectancy
Mechanical: 5,000,000 operations min. (OT value)
Electrical: 200,000 operations min. (3 A at
125 VAC), 100,000 operations min. (2 A at 250 VAC)
Mechanical: 5,000,000 operations min.
(OT value)
Electrical: 200,000 operations min.
Ambient temperature
Operating: –40°C to 85°C (with no icing)
Ambient humidity
Operating: 95% max.
Enclosure ratings
IP67 for lead wire models
IP50 for terminal models
Weight
Terminal model: 2 g, Lead wire model: 10 g
Note: The operating speed value shown is for pin plunger models. For hinge lever models, this speed is for the plunger parts.
VDE-approved Characteristics (EN61058-1)
Degree of protection against
electric shock
Ambient temperature
Operating cycles
Proof tracking index (PTI)
Switch category (IEC335-1)
Class 1
0°C to 85°C
50,000
175 V
A
Operating Characteristics
Type
OF max.
RF min.
PT max.
OT min.
MD max.
FP max.
OP
Pin plunger
D2SW-3j
D2SW-01j
1.77 N (180 gf)
0.29 N (30 gf)
0.6 mm
0.5 mm
0.1 mm
---
8.4±0.3 mm
Hinge lever
D2SW-3L1j
D2SW-01L1j
0.59 N (60 gf)
0.06 N (6 gf)
---
1.0 mm
0.8 mm
13.6 mm
8.8±0.8 mm
Simulated hinge lever
D2SW-3L3j
D2SW-01L3j
0.59 N (60 gf)
0.06 N (6 gf)
---
1.0 mm
0.8 mm
15.5 mm
10.7±0.8 mm
Hinge roller lever
D2SW-3L2j
D2SW-01L2j
0.59 N (60 gf)
0.06 N (6 gf)
---
1.0 mm
0.8 mm
19.3 mm
14.5±0.8 mm
Distributed by: Diamond Electronics Ltd
Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: [email protected]
Web: www.diamondelec.co.uk
129
Free Datasheet http://www.datasheetlist.com/


3Pages


D2SW-3L1T 電子部品, 半導体
D2SW
D2SW
Precautions
Mounting
Use two M3 mounting screws with spring washers to mount the
switch. Tighten the screws to a torque of 0.23 to 0.26 N S m (2.3 to
2.7 kgf S cm).
Mounting Holes
Two 2.4 dia. or M2.3 mounting holes
9.5
When soldering a lead wire to a terminal of the D2SW, use a solder-
ing iron with a maximum capacity of 60 W and do not take more than
5 s to solder the lead wire, otherwise the characteristics of the
D2SW may be altered.
Make sure that there is no icing when using the D2SW at low ambi-
ent temperatures.
Operations
Make sure that the switching object is perfectly separated from the
actuator when the switch is not operated and the actuator is pressed
appropriately by the switching object when the switch is operated.
The switch should be set so that its stroke will be within the rated OT
when the switch is operated.
Install the switching object so that its moving direction is the same
as that of the actuator.
Handle D2SW models with pin plungers with care so that the sealing
rubber parts around the pin plungers will not be damaged.
Recommended conductor size for the 0.1 A-series solder terminal
is AWG26 to 18 (0.13 to 0.83 mm2).
Enclosure Ratings
The D2SW was tested underwater and passed the following water-
tightness tests, which however, does not mean that the D2SW can
be used in the water.
JIS C0920 (rules for testing the watertightness of electrical devices
and materials), class 7 (watertightness test). Refer to the following
illustration for the test method.
IEC Publication 529, class IP67. Refer to the following illustration for
the test method.
ÉÉÉÉWater
ÉÉÉÉLeft for 30 mins.
ÉÉÉÉÉÉÉÉTested object
15cm min.
1m min.
Note:
The object to be tested is left in the water for 30 minutes
on condition that the distance between the surface of the
water and the top of the object be 15 cm minimum and
the distance between the surface of the water and the
bottom of the object be 1 m minimum.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. C97-E1-1
Distributed by: Diamond Electronics Ltd
Tel: +44(0)1477 500450 Fax: +44(0)1477 500656 Mail: [email protected]
Web: www.diamondelec.co.uk
132
Free Datasheet http://www.datasheetlist.com/

6 Page



ページ 合計 : 6 ページ
 
PDF
ダウンロード
[ D2SW-3L1T データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
D2SW-3L1D

Watertight Miniature Basic Switch

Omron
Omron
D2SW-3L1H

Watertight Miniature Basic Switch

Omron
Omron
D2SW-3L1M

Watertight Miniature Basic Switch

Omron
Omron
D2SW-3L1T

Watertight Miniature Basic Switch

Omron
Omron


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap