DataSheet.jp

6EL4C の電気的特性と機能

6EL4CのメーカーはTycoです、この部品の機能は「Power Entry Module」です。


製品の詳細 ( Datasheet PDF )

部品番号 6EL4C
部品説明 Power Entry Module
メーカ Tyco
ロゴ Tyco ロゴ 




このページの下部にプレビューと6EL4Cダウンロード(pdfファイル)リンクがあります。

Total 4 pages

No Preview Available !

6EL4C Datasheet, 6EL4C PDF,ピン配置, 機能
L Series
CORCOM Product Guide
Power Entry Module with RFI Power Line Filter for General
or Medical Applications
UL Recognized
CSA Certified
VDE Approved
L Series
The L series power entry modules are compact units that
combine a multi-function power entry module and high per-
formance RFI filtering capabilities. They are available with
either a four-voltage selector or a DPST on/off switch. Both
variations can be specified with North American or
European fusing capabilities and are available in either
flange or snap-in mounting.
These filters are UL recognized, CSA certified, and VDE
approved. The L series modules offer a choice of filters for
general or medical applications.
EDL Models
The RFI filter is for general purpose applications where
line-to-line and line-to-ground noise must be controlled.
The filter is designed to meet the very low leakage
requirements of VDE portable equipment. They are
available in three current ratings.
EHL Models
This medical filter provides susceptibility protection
without the leakage current associated with line-to-ground
capacitors. Designed to allow equipment to meet UL544
for patient care and non-patient care equipment, the EHL
filter has a maximum leakage current of 2 µA at 120 VAC
60 Hz. See Appendix C for more information on medical
applications and UL standards.
Voltage Selection
EDL1S/EHL1S
EDL4C/EHL4C
To change selected voltage: disconnect the power cord;
open cover using a small blade screwdriver or similar tool;
insert the tool into the voltage selection slot and remove
wheel from unit; select desired voltage; replace wheel into
unit and close cover, making sure the selected voltage
appears in connector window.
Note: All models have North American or dual European fusing capability
and are available in either flange or snap-in mounting.
Voltage
selection
slot
4-Voltage
selection
wheel
Fuseholder
Cover
Note: When using the models with an IEC connector,
remember that the leakage current of the companion line
cord, GA400, is more significant than that of the filter -
which may disqualify this line cord from use in patient care
applications.
118
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany:
49-89-6089-0
www.corcom.com
www.tycoelectronics.com
Free Datasheet http://www.datasheetlist.com/

1 Page





6EL4C pdf, ピン配列
L Series
CORCOM Product Guide
Flange mounted version
Power Entry Module with RFI Power Line Filter for General
or Medical Applications (Continued)
Case Styles — Unfiltered Models
Flange Models
Case Styles — Filtered Models
Flange Models
CD
34
12
GH
CD
F
B
A
34
12
GH
.221
5.61
.06
1.52
R
.020
.508
R
Side View
E
2.201*
55.91
2.213*
56.21
Back View
1.122*
28.50
1.575
40.00
* +.008 -.00
+.203 -.00
Recommended Panel Cutout
Typical dimensions:
Mounting Holes: .126 [3.20 ] Dia. (2)
All backplate terminals: .110 [2.79 ] terminals, except for switch.
Switch terminals are .187 [4.765 ] Note: Snap-in models allow front mounting only.
Snap-In Models
.221
5.61
Side View
E
Snap-SInnapM-in ovedrseionls
ACE
BD F
GH
CD
.221
5.61
Side View
E
Note: Metric fuse models have additional jumper from filter-to-module.
CD
F Side View
A
.221
5.61
E
.06
1.52
R
ACE
BD F
GH
.020
.508
R
(1)
2.201*
55.91
(2)
2.213*
56.21
Back View
1.122*
28.50
* +.008 -.00
+.203 -.00
Recommended Panel Cutout
(1) For panel thickness of .031-.079 [0.8-2.0]
(2) For panel thickness of .083-.126 [2.1-3.2]
(3) For snap-in application, the 1.22 [28.5] sides of the cutout must have a .02 [.508] radius on
the installation side.
All backplate terminals: .110 [2.79] terminals, except for switch. Switch terminals are .187 [4.75]
Note: Snap-in models allow front mounting only.
Case Dimensions
Part No.
Flange
Unfiltered
Snap-in
Unfiltered
Flange
Filtered
Snap-in
Filtered
ABC D E F
(max) ±.015 (max) (max) (max) (max)
±.381
1.98
50.29
1.28
32.51
1.575
40.0
2.3
58.42
2.3
58.42
2.14
54.36
2.14
54.36
1.66
42.16
1.66
42.16
1.11
28.19
1.11
28.19
1.98 1.575 2.3 2.14 2.01 1.11
50.29 40.0 58.42 54.36 51.05 28.19
1.28 2.3 2.14 2.01 1.11
32.51
58.42 54.36 51.05 28.19
120
Catalog 1654001
Revised 05-07
Dimensions are in inches and
millimeters unless otherwise
specified. Values in italics
are metric equivalents.
Dimensions are shown for
reference purposes only.
Specifications subject
to change.
USA Cust. Svc.: 1-800-468-2023
CORCOM Prods: 1-847-680-7400
Germany:
49-89-6089-0
www.corcom.com
www.tycoelectronics.com
Free Datasheet http://www.datasheetlist.com/


3Pages





ページ 合計 : 4 ページ
 
PDF
ダウンロード
[ 6EL4C データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
6EL4

Power Entry Module

Tyco
Tyco
6EL4C

Power Entry Module

Tyco
Tyco
6EL4CM

Power Entry Module

Tyco
Tyco
6EL4M

Power Entry Module

Tyco
Tyco


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap