DataSheet.jp

FX11LB-68P-SV の電気的特性と機能

FX11LB-68P-SVのメーカーはHRSです、この部品の機能は「0.5mm Pitch Connectors」です。


製品の詳細 ( Datasheet PDF )

部品番号 FX11LB-68P-SV
部品説明 0.5mm Pitch Connectors
メーカ HRS
ロゴ HRS ロゴ 




このページの下部にプレビューとFX11LB-68P-SVダウンロード(pdfファイル)リンクがあります。

Total 16 pages

No Preview Available !

FX11LB-68P-SV Datasheet, FX11LB-68P-SV PDF,ピン配置, 機能
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
FX11 Series
Stacking height : 2mm
Stacking height : 2.5mm, 3mm
Features
1. Low Profile Design
The board to board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs.
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through
a design that fixes ground plates to both sides of the
header and receptacle.
3. 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
4. Metal Fittings for Added Solder Weld Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling.The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm produces a smaller
connector utilizing less board area for mounting.
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT
portion to prevent solder wicking.
7. High contact reliability
Effective mating length is 0.55mm (2mm height),
1mm(2.5mm, 3mm height) for signal contacts.
8. Optional Ground Plate
An alternate style without the ground plate is available.The
space provided by the ground plate removal has been filled
with additional signal contacts.
Applications
Notebook computers, PDA, and other miniature electronic equipment.
10 Signal: 1 Ground Arrangement
Housing
Metal fitting
0.5mm
0.75mm
Ground Plate
Signal contact
0.75mm
Ground plate and metal fitting make contact
Stacking height variation
2mm 2.5 , 3
mm
Note: 2.0mm type and 2.5mm, 3mm type are not mated with each other.
Structure Prevent solder vicking
Contact
surface
Solder gap portion
Board mounting portion
Land
A222
Free Datasheet http://www.datasheet-pdf.com/

1 Page





FX11LB-68P-SV pdf, ピン配列
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHFS Xpr1od1ucStserhiaevesbee0n.d5ismcomntinPueitdc, ohr wCilol bnendiesccotnotinrusedwsiotohn. GPleraoseucnhdeckPthlaetperofdourcts2smtamtustoon t3hemHmirosBe woeabrsdite-tRooH-BS soeaarrcdh aCt wownwn.heircostieo-cnonsnectors.com, or contact your Hirose sales representative.
Stacking height : 2mm
Product Specifications
Rated current 0.3 A (Note 1) Operating temperature range -55 to 85ç
Storage temperature range -10 to +60ç (Note 2)
Rating Rated voltage 50 V AC
Operating humidity range Relative humidity 95% or less Storage humidity range -40 to -70% (Note 2)
(No condensation)
Item
1. Insulation resistance
2. Voltage proof
3. Contact resistance
4. Vibration
5. Shock
6. Damp heat
(Steady state)
7. Temperature cycle
8. Durability
9. Resistance to
soldering heat
Requirements
100 Mø or greater
No flashover or breakdown
60 mø or less
No electrical discontinuity for 1μs or greater
No damage, cracks, or parts looseness
Conditions
Measured at 100 V DC
150 V AC applied for one minute
Measured at 100 mA
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions,
10 cycles each
No electrical discontinuity for 1μs or longer
No damage, cracks, or parts looseness
Acceleration of 490 m/s2, 11ms duration, sine half-wave
waveform,for 3 cycles in the both directions of each of the 3 axes
Contact resistance of 70 mø or less, insulation resistance of
100 Mø or greater, no damage, cracks, or parts looseness
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Contact resistance of 70 mø or less, insulation resistance of Temperature: -55ç 15 to 35ç 85ç 15 to 35ç
100 Mø or greater, no damage, cracks, or parts looseness Time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles
Contact resistance of 70 mø or less
No damage, cracks, or parts looseness
50 times
No melting of resin portion which affects performance
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
Note 1: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 2: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
Materials
Part Material
Finish
Insulator
LCP
Beige
Contacts
Copper alloy
Phosphor bronze
Header
Receptacle
Engagement Area: Gold plating of 0.1μm
Termination Area: Flash plating
Ground plate
Phosphor bronze
Tin plating
Metal fitting
Metal plate
Phosphor bronze
Tin plating
Ordering information
Type With Ground Plate FX11L # - π P - / π - SV (✽ ✽)
Remarks
UL94V-0
----------
----------
----------
----------
12
4
5
3
Type Without Ground Plate FX11L # - π P - SV (✽ ✽)
6
1 2 34 5 6
1 Series name : FX11L
4 Connector type
2 Form Symbol A : With guide post
P : Header
B : Without guide post
S : Receptacle
3 Number of contacts Type with ground plate
5 Contact form
Signal/Ground:60/6, 80/8,
SV : Straight SMT
100/10, 120/12
6 Blank, (71): Tray packaging (Without pick-and-place tape)
Type without ground
(21),(91): Embossed tape packaging (Without pick-and-place tape)
Signal: 68, 92, 116, 140
(22),(92): Embossed tape packaging (With pick-and-place tape)
A224
Free Datasheet http://www.datasheet-pdf.com/


3Pages


FX11LB-68P-SV 電子部品, 半導体
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be disconFtiXnu1e1d sSooenr. iPelesase0ch.5ecmk tmhe PpriotdcuhctsCsotantuns eonctthoerHsirowseitwhebGsitreoRuoHnSdseParlcahteat fwowrw.2himrosme-ctoonn3ecmtorms.cBomo, aorrcdo-nttoac-tByoouar rHdiroCseosnanlesercetpiroesnesntative.
Header without ground Plate
2mm stacking height
(0.5)
A±0.2
0.2±0.05
B±0.3
1-(Ø0.8)
C±0.1
Guidepost
Unit : mm
Part Number
CL No.
Number of contacts
ABCDE
Signal
Remarks
RoHS
FX11LA- 68P-SV(**) 573-0042-1-**
68 16.5 22.6 18 19.4 25.5
FX11LA- 92P-SV(**) 573-0043-4-**
92 22.5 28.6 24 25.4 31.5
With guideposts
FX11LA-116P-SV(**) 573-0044-7-** 116 28.5 34.6 30 31.4 37.5
FX11LA-140P-SV(**) 573-0045-0-** 140 34.5 40.6 36 37.4 43.5
FX11LB- 68P-SV(**) 573-0052-5-**
68 16.5 22.6 ---------- 19.4 25.5
YES
FX11LB- 92P-SV(**) 573-0053-8-**
92 22.5 28.6 ---------- 25.4 31.5
Without guideposts
FX11LB-116P-SV(**) 573-0054-0-** 116 28.5 34.6 ---------- 31.4 37.5
FX11LB-140P-SV(**) 573-0055-3-** 140 34.5 40.6 ---------- 37.4 43.5
[Specifications number] – **, (**)
Blank: Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
3 E min
Recommended metal mask thickness: 0.15 mm
B
+ 0.1
0
D--00.1
C±0.05
A±0.05
0.5±0.03
2 Ø0.9±0.05
0.75±0.05
Ø1±0.05 2
0.3±0.03(Land)
0.25±0.03(Metal mask)
Note 1 The cross-hatched area inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
3 Do not mount a part other than this product in the area of . Doing so will prevent the engagement
of this and the mating connector.
A227
Free Datasheet http://www.datasheet-pdf.com/

6 Page



ページ 合計 : 16 ページ
 
PDF
ダウンロード
[ FX11LB-68P-SV データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
FX11LB-68P-SV

0.5mm Pitch Connectors

HRS
HRS


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap