DataSheet.jp

UPC277GR-9LG の電気的特性と機能

UPC277GR-9LGのメーカーはRenesasです、この部品の機能は「SINGLE POWER SUPPLY DUAL COMPARATORS」です。


製品の詳細 ( Datasheet PDF )

部品番号 UPC277GR-9LG
部品説明 SINGLE POWER SUPPLY DUAL COMPARATORS
メーカ Renesas
ロゴ Renesas ロゴ 




このページの下部にプレビューとUPC277GR-9LGダウンロード(pdfファイル)リンクがあります。

Total 14 pages

No Preview Available !

UPC277GR-9LG Datasheet, UPC277GR-9LG PDF,ピン配置, 機能
To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Free Datasheet http://www.datasheet4u.net/

1 Page





UPC277GR-9LG pdf, ピン配列
DATA SHEET
BIPOLAR ANALOG INTEGRATED CIRCUIT
μ PC277GR-9LG, μ PC277MP-KAA, μ PC393GR-9LG
SINGLE POWER SUPPLY DUAL COMPARATORS WITH SMALL PACKAGE
<R> DESCRIPTION
The μ PC277GR-9LG, μ PC277MP-KAA, μ PC393GR-9LG are dual comparators which are designed to operate for a
single power supply. It includes features of low-voltage operation, a common-mode input voltage that range from V
(GND) level, an open collector output, and low current consumption. Furthermore, these products can operate on a
split power supply and be used for an extensive comparison of various voltages.
The μ PC277GR-9LG, μ PC277MP-KAA which expands temperature type is suited for wide operating ambient
temperature use, and μ PC393GR-9LG is used for general purposes.
A DC parameter selection that is compatible to comparators is also available.
μ PC177GR-9LG, μ PC339GR-9LG which are quad types with the same circuit configuration are also available as
series of comparators.
<R> FEATURES
• Input Offset Voltage ±2 mV (TYP.)
• A wired OR is possible as the open collector is output.
• Input Bias Current
17 nA (TYP.)
• A low voltage operation is possible. V+ V: +2 to +32 V
• Voltage Gain
200000 (TYP.)
• Pulse Response Time 1.8 μs (TYP.)
• Output Sink Current 16 mA (TYP.)
• Small Package
The mounting area is reduced to 40% or 66% compared to the conventional 8-pin plastic SOP as shown in the
following diagram.
Package
Subject part number
Outline comparison
Standard SOP
μ PC277G2,
μ PC393G2
TSSOP
μ PC277GR-9LG,
μ PC393GR-9LG
TSSOP (2.8 x 2.9)
μ PC277MP-KAA
(Mounting area ratio)
6.5 4.4
6.4
5.2
(100%)
3.15
(60%)
2.8 4.0
2.9
(34%)
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. G17934EJ3V0DS00 (3rd edition)
Date Published December 2007 NS
Printed in Japan
The mark <R> shows major revised points.
2006, 2007
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
Free Datasheet http://www.datasheet4u.net/


3Pages


UPC277GR-9LG 電子部品, 半導体
μ PC277GR-9LG, μ PC277MP-KAA, μ PC393GR-9LG
RECOMMENDED OPERATING CONDITIONS
Parameter
Power Supply Voltage (Split)
Power Supply Voltage (V= GND)
Symbol
V±
V+
MIN.
±1
+2
TYP.
MAX.
±16
+32
Unit
V
V
<R> ELECTRICAL CHARACTERISTICS
μ PC277GR-9LG, μ PC277MP-KAA, μ PC393GR-9LG (TA = 25°C, V+ = +5 V, V= GND)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Input Offset Voltage
VIO VO = 1.4 V, VREF = 1.4 V, RS = 0 Ω
±2 ±5
Input Offset Current
Input Bias Current Note1
IIO VO = 1.4 V
IB VO = 1.4 V
±5 ±50
17 250
Voltage Gain
Circuit Current Note2
Common Mode lnput Voltage Range
AV
ICC
VICM
RL = 15 kΩ
RL = , IO = 0 A
200000
0.6 1
0 V+ 1.5
Output Saturation Voltage
Output Sink Current
VOL
IO SINK
VIN () = +1 V, VIN (+) = 0 V, IO SINK = 4 mA
VIN () = +1 V, VIN (+) = 0 V, VO 1.5 V
6
0.2 0.4
16
Output Leakage Current
Pulse Response Time Note3
IO LEAK
VIN (+) = +1 V, VIN () = 0 V, VO = 5 V
RL = 5.1 kΩ, VRL = 5 V,
0.1
1.8
Unit
mV
nA
nA
mA
V
V
mA
nA
μs
μ PC277GR(5)-9LG, μ PC277MP(5)-KAA, μ PC393GR(5)-9LG (TA = 25°C, V+ = +5 V, V= GND)
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Input Offset Voltage
Input Offset Current
Input Bias Current Note1
VIO VO = 1.4 V, VREF = 1.4 V, RS = 0 Ω
IIO VO = 1.4 V
IB VO = 1.4 V
±2 ±2.5 mV
±5 ±50 nA
17 60 nA
Voltage Gain
Circuit Current Note2
Common Mode lnput Voltage Range
AV
ICC
VICM
RL = 15 kΩ
RL = , IO = 0 A
200000
0.6 0.8 mA
0
V+ 1.4
V
Output Saturation Voltage
VOL1
VIN () = +1 V, VIN (+) = 0 V, IO SINK = 4 mA
0.2 V
VOL2
VIN () = +1 V, VIN (+) = 0 V, IO SINK = 10 mA
1.5 V
Output Sink Current
IO SINK
VIN () = +1 V, VIN (+) = 0 V, VO 1.5 V
10
16
mA
Output Leakage Current
Pulse Response Time Note3
IO LEAK
VIN (+) = +1 V, VIN () = 0 V, VO = 5 V
RL = 5.1 kΩ, VRL = 5 V,
0.1 100 nA
1.8 μs
Notes1. The input bias current flows in the direction where the IC flows out because the first stage is configured with a
PNP transistor.
In addition, the value of this item is a value of when the differential amplified circuit of the input stage is
balanced. When the comparator is active, then twice the amount of current will flow to a pin with low
potential.
2. This is a current that flows in the internal circuit. This current will flow irrespective of the channel used.
3. This is the value when input oscillation is 100 mV and the over drive is 5 mV.
If the amount of over drive is increased then the response time can be cut down.
4 Data Sheet G17934EJ3V0DS
Free Datasheet http://www.datasheet4u.net/

6 Page



ページ 合計 : 14 ページ
 
PDF
ダウンロード
[ UPC277GR-9LG データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UPC277GR-9LG

SINGLE POWER SUPPLY DUAL COMPARATORS

Renesas
Renesas


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap