DataSheet.jp

OZ9936 の電気的特性と機能

OZ9936のメーカーはO2Microです、この部品の機能は「LCD Monitor CCFL Inverter Controller」です。


製品の詳細 ( Datasheet PDF )

部品番号 OZ9936
部品説明 LCD Monitor CCFL Inverter Controller
メーカ O2Micro
ロゴ O2Micro ロゴ 




このページの下部にプレビューとOZ9936ダウンロード(pdfファイル)リンクがあります。
Total 11 pages

No Preview Available !

OZ9936 Datasheet, OZ9936 PDF,ピン配置, 機能
OZ9936
Change Summary
CHANGES
No Applicable Section
1 Footer
Description
Added patent numbers
Page(s)
0
REVISION HISTORY
Revision
No.
0.90
1.0
Description of change
Initial release
Features: 1. Add ‘Built-in intelligence to ignite positive impedance
CCFLs; 2. Add ‘Shutdown delay for input brownout condition’; 3. Delete
‘Tight parameter tolerance’
General Description: 1. Add ‘OZ9936 drives all types of CCFLs and is
able to ignite positive impedance CCFLs. OZ9936 provides a shutdown
delay feature for input brownout condition.’ after ‘OZ9936 operates at a
constant…’. 2. Move the paragraph ‘The OZ9936 provides two drive…’
to the 2nd paragraph
Electrical Specifications: a. Update ‘Supply Current’ Max limits;
b. Update ‘Soft Start Current Source’ Typ & Max limits; c.
Update ‘Under Voltage Lockout’ Min, Typ & Max limits; d.
Update ‘ENA_SST_CMP Pin – Low’ Max limit; e. Update
Operating Frequency on DRV1 & DRV2 Pin’ Min, Typ & Max
limits & Temperature Coefficient; f. Update ‘Duty Cycle on DRV1
& DRV2 (active high)’ Max limit; g. Update ‘Ignition Time’ Min &
Max limits; h. Add ‘Open Lamp Shutdown Delay Time’
parameters; i. Update ‘V1(ENA_SST_CMP Pin) Threshold’ Min
limit; j. Update ‘Drivers’ Typ & Max limits; k. Update ‘Analog
Dimming Control’ Min, Typ & Max limits; l. Update ‘External
PWM Dimming Control’ Min, Typ & Max limits and add
temperature coefficient.
Functional Description: Modify No. 7. Open Lamp Protection.
Throughout data sheet: Miscellaneous corrections.
Release
Date
09/09/04
03/09/05
04/06/05
Copyright © 2003-2005 by O2Micro
OZ9936-DS-1.1
All Rights Reserved
CONFIDENTIAL
Page 0
U.S. Patents #6,559,606
#6,856,519
#6,809,938
#6,804,129
Free Datasheet http://www.datasheet4u.net/

1 Page





OZ9936 pdf, ピン配列
PIN DESCRIPTION
OZ9936
Names
ENA_SST_CMP
RT
GNDA
DRV2
DRV1
VDDA
DIM
ISEN
Pin No.
1
2
3
4
5
6
7
8
Description
Enable, Soft Start Time and Compensation for Current and Voltage
Timing Resistor to Provide Striking and Operating Frequency
Ground
N MOSFET Drive Output
N MOSFET Drive Output
Supply Voltage
Dimming Voltage Adjust Input
Current Sense Feedback
ABSOLUTE MAXIMUM RATINGS(1)
Input Voltage VDDA
GNDA
Signal Inputs
7.0V
+/- 0.3V
-0.3V to VDDA +0.3V
Operating Temp.
OZ9936
0oC to +70oC
OZ9936I
-40oC to +85oC
Operating Junction Temp.
Storage Temp.
125oC
-55oC to 150oC
RECOMMENDED OPERATING RANGE
VDDA - Input Voltage
fop - Operating Frequency
Thermal Impedance (θJ-A)
- 8-pin PDIP
- 8-pin SOIC
4.5V to 5.5V
30KHz to 150KHz
74oC/W
113oC/W
Note (1): The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed.
The device should not be operated at these limits. The “Electrical Characteristics” table defines the conditions for actual
device operation. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
CONFIDENTIAL
OZ9936-DS-1.1
Page 2
Free Datasheet http://www.datasheet4u.net/


3Pages


OZ9936 電子部品, 半導体
FUNCTIONAL DESCRIPTION
1. Power Conversion
The power train can be selected from the
standard half-bridge, full-bridge, push-pull or
Class-D topologies to provide symmetrical drive
pulses to the tank circuit that includes the
transformer(s), output capacitors and the
CCFL/panel load, to yield quasi-sinusoidal CCFL
voltage and current waveforms. High-efficiency
operation of the OZ9936 yields lower heat
dissipation for the inverter system resulting in
higher reliability.
To illustrate the controller functions, refer to
Figures 1 and 2 on pages 4 and 7, respectively
for the following sections. Other topologies can
be found in the OZ9936 Application Note.
2. Enable
The OZ9936 is enabled when the voltage on Pin
1 is greater than 0.55V.
3. Soft Start (SST)
Connecting an external capacitor to Pin 1
provides the SST function. A charging current is
provided to capacitor C11. At Start-up, as
capacitor C11 charges, the voltage level controls
the gradual increase in power to the transformer.
This reduces in-rush current and provides reliable
operation to the CCFL.
4. Ignition
The ignition process requires a higher striking
frequency to strike the CCFL. The striking
frequency is approximately 1.3 times the normal
operating frequency. The striking frequency is
determined by external resistor R13 connected to
RT (Pin 2).
5. Normal Operation
OZ9936 operates in a constant frequency mode.
This eliminates any undesired interference
between the controller and LCD panel, as the
interference is usually associated with variable-
frequency design. Interference may result in a
poor user experience because of “waterfall”
display distortion and other poor display
appearance.
Once the CCFL is ignited and current is sensed
at Pin 8 (ISEN), the control loop regulates the
CCFL current. An external resistor, R13,
OZ9936
connected to RT (Pin 2) determines the operating
frequency. The approximate operating frequency
is calculated by the following equation.
fop =
5.0 x103
RT [K]
[KHz]
6. Over-Voltage Protection
The control logic protects the transformer from an
abnormally high voltage at the secondary output.
The transformer output voltage is sensed through
Rectifier Diodes (CR1, CR3, CR5, CR8) and
transistor Q5. When the voltage at the emitter of
Q5 is less than –VBE drop, Q5 will conduct and
regulate the output voltage to the transformer
secondary.
7. Open Lamp Protection
When a CCFL is removed or damaged during
normal operation, the OZ9936 shuts off the
output drives after the shutdown delay timer
expires. When the damaged lamp is replaced,
toggling the enable pin from low to high resumes
normal operation.
OZ9936 provides a shutdown delay feature if the
lamp current is not regulated. The inverter
module will remain in normal operation for
approximately 2 to 3 seconds if the input voltage
suddenly drops and subsequently resumes to
normal level.
8. Aged CCFL Ignition
During the ignition process, the controller senses
the voltage at the CCFL. For an open-circuit
condition, the power train delivers a regulated
voltage at the CCFL for approximately 2.0
seconds. If no current is sensed after
approximately 2.0 seconds, the OZ9936 shuts
off. Toggling the enable signal from low to
floating will resume normal operation. This is to
ensure that any aged, slow-turn-on CCFL is
provided with sufficient voltage and time to ignite.
9. Dimming Control
The OZ9936 provides an analog dimming control
function. The input to Pin 7 (DIM) is an analog
voltage of 0.5V to 1.25V that corresponds to
approximately 40% to 100% of the LCD panel
brightness.
CONFIDENTIAL
OZ9936-DS-1.1
Page 5
Free Datasheet http://www.datasheet4u.net/

6 Page



ページ 合計 : 11 ページ
 
PDF
ダウンロード
[ OZ9936 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
OZ9932

LCD Monitor CCFL Inverter Controller

O2Micro
O2Micro
OZ9933

(OZ99xx) Intelligent Lighting

O2Micro
O2Micro
OZ9936

LCD Monitor CCFL Inverter Controller

O2Micro
O2Micro
OZ9937

(OZ99xx) Intelligent Lighting

O2Micro
O2Micro


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap