DataSheet.jp

HUB12 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 HUB12
部品説明 Engineered to Break-Out Audio Science Multi-Channel Audio Cards
メーカ StudioHub
ロゴ StudioHub ロゴ 



Total 1 pages
		

No Preview Available !

HUB12 Datasheet, HUB12 PDF,ピン配置, 機能
For Assys:
HUB12
Rev: 07/05
StudioHub+ Model HUB12
Engineered to Break-Out Audio Science Multi-Channel Audio Cards
via StudioHub+ / RJ-45 Connectivity
Name
Mount
Channels
CAT-5 Pairs
Power Link
Connectors
Versions
Product Key
HUB12
rack (1 r.u.)
8 Out / 4 In
2 (1,2,3,6)
no
12 RJ-45 / 2 BNC (for sync.)
1 MD-50 (for analog) / 1 MD-26 (for digital)
Rack-mount only (as pictured)
Analog I/O
Connector (MD-50)
- /OUTPUT 7 AES -
WORD CLOCK IN/OUT 8 AES -
+/OUTPUT 7 AES +
WORD CLOCK OUT/OUT 8 AES +
Digital I/O Connector
(MD-26)
NOTE - These pin-outs typically correlate 1 to 1 for Audio
Science series 4000, 5000 and 6000 audio cards so that
straight-thru patch cables may be utilized.
General
The Hub12 is specifically engineered to
break-out up to 8 stereo output
channels and 4 stereo input channels
from series 4000, 5000 and 6000 Audio
Science professional multi-channel
audio cards. Inputs and outputs appear
on RJ-45 connectors and conform to the
StudioHub+ audio pin-out standard.
Front panel high-density MD-50 & MD-
26 connectors mate with similar
connectors on the various ASI cards
supported.
BNC Synchronous connectors
Front panel BNC connectors provide
Word-Clock sync inputs and outputs as
supported by the individual ASI card
models. Insert pins in internal jumpers
JU9 & JU10 (center and forward pins -
towards the BNC connectors) in to
activate these connectors.
Grounding Information
Front panel RJ-45 shields are all
normally isolated from each other, but
may be connected together via an
internal common ground bus. Insert pins
in internal jumpers JU1 thru JU8 and
JU11 to JU14 in the center and forward
pins (towards the RJ-45 connectors) to
connect to the chassis ground. Insert the
jumper pins in the center and rear pins
(away from the RJ-45 connectors) to
connect to the common isolated ground
buss.
The isolated ground buss may be
connected to the chassis ground by
inserting internal jumper JU15.
ANALOG I/O
50 PIN
MINIATURE “D”
DIGITAL I/O
26 PIN
MINIATURE “D”
JU1 to JU8
&
JU11 to
JU14
8
7
6
5
4
3
2
1
JU9
WORD CLOCK IN
JU15
Chassis
Ground
Common
Ground
JU10
WORD CLOCK OUT
StudioHub+ Pin Outs
Channel
L+ / AES +
L- / AES -
R+
R-
nc
GND
15V-
15V+
Shield
Shield
Color Pair
Wht/Org
Org/Wht
Wht/Grn
Grn/Wht
Wht/Blu
Blu/Wht
Wht/Brn
Brn/Wht
Wht/Slt
Slt/Wht
RJ-45 Pin
1
2
3
6
5
4
7
8
Shield
Shield
110 Pin
3
4
5
6
1
2
7
8
9
10
Internal Jumper Locations
All jumpers are internally located. Remove the top
cover of the unit to access each jumper behind its
corresponding connector.
®
601 Heron Drive · Logan Township, NJ 08085
(856) 467-8000 · Fax (856) 467-3044
www.studiohub.com
www.radiosystems.com
Free Datasheet http://www.datasheet4u.net/

1 Page





ページ 合計 : 1 ページ
PDF
ダウンロード
[ HUB12.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
HUB12

Engineered to Break-Out Audio Science Multi-Channel Audio Cards

StudioHub
StudioHub
HUB12

Isolated DC-DC Converters

BOTHHAND ENTERPRISE
BOTHHAND ENTERPRISE

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap