DataSheet.jp

95F118AS の電気的特性と機能

95F118ASのメーカーはFujitsuです、この部品の機能は「 MB95F118AS」です。


製品の詳細 ( Datasheet PDF )

部品番号 95F118AS
部品説明 MB95F118AS
メーカ Fujitsu
ロゴ Fujitsu ロゴ 




このページの下部にプレビューと95F118ASダウンロード(pdfファイル)リンクがあります。

Total 58 pages

No Preview Available !

95F118AS Datasheet, 95F118AS PDF,ピン配置, 機能
FUJITSU SEMICONDUCTOR
DATA SHEET
DS07-12602-1E
8-bit Proprietary Microcontrollers
CMOS
F2MC-8FX MB95110A Series
MB95116A/F118AS/F118AW/FV100A-101
DESCRIPTION
The MB95110A series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set,
the microcontrollers contain a variety of peripheral functions.
FEATURES
F2MC-8FX CPU core
Instruction set that is optimum to the controllers
• Multiplication and division instructions
• 16-bit arithmetic operation
• Bit test branch instruction
• Bit manipulation instructions etc.
Clock
• Main clock
• Main PLL clock
• Subclock (for dual clock product)
• Sub PLL clock (for dual clock product)
PACKAGES
48-pin plastic BCC
48-pin plastic-LQFP
(Continued)
(LCC-48P-M09)
(FPT-48P-M26)
Free Datasheet http://www.datasheet.in/

1 Page





95F118AS pdf, ピン配列
MB95110A Series
PRODUCT LINEUP
Part number
Parameter
MB95116A
MB95F118AS
MB95F118AW MB95FV100A-101
Type
MASK product
FLASH product
EVA product
ROM capacity
32 Kbytes
60 Kbytes
RAM capacity
1 Kbytes
2 Kbytes
3.75 Kbytes
Reset output
No
Option
Selectable
single/dual
-system*2
Single-system
Dual-system
Selectable
single/dual
-system*1
CPU functions
Number of basic instructions
Instruction bit length
Instruction length
Data bit length
Minimum instruction execution time
Interrupt processing time
: 136
: 8 bits
: 1 to 3 bytes
: 1, 8, and 16 bits
: 0.1 µs (at internal 10 MHz)
: 0.9 µs (at internal 10 MHz)
Ports
(Max 40 ports)
General-purpose I/O port (Nch open drain) : 2 ports
General-purpose I/O port (CMOS)
: 38 ports
Timebase timer
Interrupt cycle : 0.5 ms, 2.05 ms, 8.2 ms, 32.8 ms (at main oscillation clock 4 MHz)
Watchdog timer
Reset generated cycle
At main oscillation clock 10 MHz
: Minimum 105 ms
At sub oscillation clock 32.768 kHz (for dual clock product) : Minimum 250 ms
Wild register
Capable of replacing 3 bytes of data
I2C bus
Master/slave sending and receiving
Bus error function and arbitration function
Detecting transmitting direction function
Start condition repeated generation and detection functions
Built-in wake-up function
UART/SIO
Data transfer capable in UART/SIO
Full duplex double buffer, variable data length (5/6/7/8-bit), built-in baud rate generator
Transfer rate : 2400 bps to 125000 bps (at machine clock 10 MHz)
NRZ type transfer format, error detected function
LSB-first or MSB-first can be selected.
Clock synchronous (SIO) or clock asynchronous (UART) data transfer capable
LIN-UART
Dedicated reload timer allowing a wide range of communication speeds to be set.
Capable of data transfer synchronous or asynchronous to clock signal.
LIN functions available as the LIN master or LIN slave.
A/D converter
(8 channels)
8/16-bit
compound timer
(2 channels)
8-bit or 10-bit resolution can be selected.
Each channel of the timer can be used as “8-bit timer × 2 channels” or “16-bit timer ×
1 channel”.
Built-in timer function, PWC function, PWM function, capture function and square
waveform output
Count clock : 7 internal clocks and external clock can be selected.
(Continued)
3
Free Datasheet http://www.datasheet.in/


3Pages


95F118AS 電子部品, 半導体
MB95110A Series
DIFFERENCES AMONG PRODUCTS AND NOTES ON SELECTING PRODUCTS
Notes on Using EVA Products
The EVA product has not only the functions of the MB95110A series but also those of other products to support
software development for multiple series and products of F2MC-8FX family. The I/O addresses for peripheral
resources not used by the MB95110A series are therefore access-barred. Read/write access to these access-
barred addresses may cause peripheral resources supposed to be unused to operate, resulting in unexpected
malfunctions of hardware or software.
Take particular care not to use word, long word, or similar access to read or write odd numbered bytes in the
prohibited areas.
Note that the values read from barred addresses are different between the EVA product and the FLASH or MASK
product. Therefore, the data must not be used for software processing.
The EVA product does not support the functions of some bits in single-byte registers. Read/write access to these
bits does not cause hardware malfunctions. Since the EVA, FLASH, and MASK products are designed to behave
completely the same way in terms of hardware and software, you do not have to pay special attention to specific
products.
Difference of Memory Spaces
If the amount of memory on the EVA product is different from that of the FLASH or MASK product, carefully
check the difference in the amount of memory from the product to be actually used when developing software.
Current Consumption
• The current consumption of FLASH product is typically greater than for MASK product.
• For details of current consumption, refer to “ELECTRICAL CHARACTERISTICS”.
Package
For details of information on each package, see “PACKAGE DIMENSIONS”.
Operating voltage
The operating voltage are different among the EVA, FLASH and MASK products.
For details of operating voltage, refer to “ELECTRICAL CHARACTERISTICS”
Difference between RST and MOD pins
The RST and MOD pins are hysteresis inputs on the MASK product. A pull-down resistor is provided for the
MOD pin of the MASK product.
6
Free Datasheet http://www.datasheet.in/

6 Page



ページ 合計 : 58 ページ
 
PDF
ダウンロード
[ 95F118AS データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
95F118AS

MB95F118AS

Fujitsu
Fujitsu


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap