|
|
Número de pieza | DM12864-24 | |
Descripción | LCD Module User Manual | |
Fabricantes | Dalian Dongfu | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de DM12864-24 (archivo pdf) en la parte inferior de esta página. Total 14 Páginas | ||
No Preview Available ! LCD Module User Manual
Dalian Dongfu Color Display Co.,Ltd
LCD Module User Manual
DM 12864-27
Tel.: 86-411-84619565
Fax: 86-411-84619585
E-mail:sales @ dongfu.com
Website: http://www.dongfu.com
Dalian Dongfu Color Disply Co.,Ltd
Page 1 of 14
Free Datasheet http://www.datasheet4u.com/
1 page LCD Module User Manual
Note:
1) The modules may be destroyed if they are used beyond absolute maximum ratings. In
ordinary operation, it is desirable to use them within recommended operation conditions.
Using the modules beyond these conditions may cause malfunction and poor reliability.
2) All voltage values are referenced to GND=0V.
3-4 Electrical characteristics (VDD=5.0V, Vss=0V,Ta = 25℃)
Item
Power Voltage
Logic
LCDdrive
Symbol
Vdd
Vdd-Vee
Condition
Input High Voltage
Vih1
Vih2
Input Low Voltage
Vil1
Vil2
Output Voltage
“H” Level
“L” Level
Voh
Vol
-Ioh=200uA
Iol=1.6mA
Frame Frequency
Fosc
Vdd=5.0V Rf=75k
Ω±2%
Power Consumption
Idd
Note: All the dots are in the static state.
Min.
----
---
0.7Vdd
2.0
0
0
2.4
---
190
---
Typ.
5.0
Max.
---
Unit
13.4 ---
--- Vdd
--- Vdd
--- 0.3Vdd
--- 0.8
--- ---
--- 0.4
V
270 350 KHz
1.3 --- mA
3-5.Example of power supply
Dalian Dongfu Color Disply Co.,Ltd
Page 5 of 14
Free Datasheet http://www.datasheet4u.com/
5 Page 6-4 Inspection standar
LCD Module User Manual
Item
1) Display on inspection
2) Black/White spot
3) Black/White line
Criterion for defects
(1) Non display
(2) Vertical line is deficient
(3) Horizontal line is deficient (4) Cross line is deficient
Size Φ(mm) Acceptable number
Φ≤0.3
Ignore (note)
0.3<Φ≤0.45
3
0.45<Φ≤0.6
1
0.3<Φ
0
(Note) Not allowed if four more spots crowd together
Defect
type
Major
Minor
Length (mm) Width (mm) Acceptable number
L≤10
W≤0.03
Ignore
5.0≤L≤10 0.03<W≤0.04
3
5.0≤L≤10 0.04<W≤0.05
2
1.0≤L≤10 0.05<W≤0.06
2
1.0≤L≤10 0.06<W≤0.08
1
L≤10 0.08<W
follows 2) point defect
Defects separate with each other at an interval of more than 20mm.
Minor
4) Display pattern
5) Spot-like contrast
irregularity
[Unit: mm]
A+B≤0.45 0<C D+E≤0.35 F+G≤0.35
2 22
Note: 1) Up to 3 damages acceptable
2) Not allowed if there are two or more pinholes every 3 of
fourths inch.
Size Φ(mm)
Φ≤0.7
0.7<Φ≤1.0
1.0<Φ≤1.5
1.5<Φ
Acceptable Number
Ignore (note)
3
1
0
Note: 1) Conformed to limit samples.
2)Intervals of defects are more than 30mm.
Minor
Minor
Dalian Dongfu Color Disply Co.,Ltd
Page 11 of 14
Free Datasheet http://www.datasheet4u.com/
11 Page |
Páginas | Total 14 Páginas | |
PDF Descargar | [ Datasheet DM12864-24.PDF ] |
Número de pieza | Descripción | Fabricantes |
DM12864-24 | LCD Module User Manual | Dalian Dongfu |
DM12864-28 | Display Module | ETC |
DM12864-28 | Dot matrix LCD module Manual | ETC |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |