DataSheet.jp

HES100YE-AT の電気的特性と機能

HES100YE-ATのメーカーはPower-Oneです、この部品の機能は「HES SERIES 150 WATT」です。


製品の詳細 ( Datasheet PDF )

部品番号 HES100YE-AT
部品説明 HES SERIES 150 WATT
メーカ Power-One
ロゴ Power-One ロゴ 




このページの下部にプレビューとHES100YE-ATダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

HES100YE-AT Datasheet, HES100YE-AT PDF,ピン配置, 機能
HES SERIES
150 WATT
Powering Communications and Technology
DESCRIPTION
HES single output DC/DC converters provide up to
150 Watts of output power in an industry standard,
half-brick package and footprint. These units feature
ultra-high efficiency, Class A conducted noise specs,
and fixed switching frequency. The HES is designed
with open-frame packaging, along with planar
magnetics to provide maximum useable power with
minimal thermal constraints. The HES is especially
suited to harsh telecom, networking, and industrial
applications, and is fully compatible with production
board washing processes.
TECHNICAL SPECIFICATIONS
FEATURES
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
Input Reverse Voltage Protection
Input Undervoltage Lockout / Hysteresis
Output
Setpoint Accuracy
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Remote Sense Headroom
Minimum Output Current
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
Short Circuit / Overcurrent Protection
Current Limit Threshold Range, % of Iout Rated
OVP Trip Range
OVP Type
General
• High Efficiency
• Industry Standard Half-
18 - 36 VDC
36 - 72 VDC
50 mA
Shunt Diode
<34V/1V Nom.
Brick
Open-Frame Packaging
100°C Baseplate
Operation
• Water Washable
• “True-Trim” Option
• 1500V Isolation
• Positive or Negative
Logic
±1%
0.2% Vout
0.2% Vout
0.5 VDC
10 %
25% Iout
4% Vout
500 ms
±10%
Shutdown / Hiccup
110 - 130%
120 - 140% Vout Nom.
Self Recovering
95
90
85
80
75
70
65
60
55
50
1
Efficiency vs. Load (48V Input)
HES033ZE
HES075ZG
HES100ZE
2 3 4 5 6 7 8 9 10
X10 = LOAD %
Turn-On Time
Remote Shutdown
Remote Shutdown Reference
Switching Frequency 2.5 & 3.3, 5V Model
Isolation
Input - Output
Input - Case
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Storage Range
Thermal Shutdown Range
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore Tr-nwt-000332)
Safety
Weight (Approx.)
10 ms
Positive Or Negative Logic
Vin Negative
200 kHz, 300 kHz (Respectively)
1500 VDC
1050 VDC
500 VDC
0.02%/°C
-40 To +100°C
-40 To +125°C
105 To 115°C
5 g, 10 - 55 Hz
1.8 X 106 hrs
UL 1950, Csa 22.2-950, En60950
1.4 oz
Notes
MTBF predictions may vary slightly from model to model.
Specifications typically at 25°C, normal line, and full load,
unless otherwise stated.
Soldering Conditions: I/O pins, 260°C, ten seconds; fully
compatible with commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model.
Please consult factory for specific model information.
Units are water-washable and fully compatible with commercial
spray or immersion post wave-solder washing equipment.
1

1 Page





HES100YE-AT pdf, ピン配列
OPTIONS
Powering Communications and Technology
When ordering equipment options, use the following suffix information. Select the option(s) that you
prefer and add them to the model number. Example ordering options are located below the options
table.
OPTIONS
Negative Logic
Lucent Compatible Trim
Terminal Strip
Trim
Enable
Trim and Enable
Current Share
Headerless
SUFFIX
APPLICABLE SERIES
N HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
T HAS, HBD, HBS, HES, QBS, QES
TS XWS, XWD, XWT
1 IAS, LES
2 IAD, IAS, LES, SMS
3 IAS, LES
4 SMS
Y Encapsulated EWS, IWS, OWS
REMARKS
TTL "Low" Turns Module ON
TTL "High" Turns Module OFF
PIN LENGTH AND HEATSINK
OPTIONS
0.110" (2.8mm) Pin Length
0.150" (3.8mm) Pin Length
0.24" (6.1mm) Horizontal Heatsink
0.24" (6.1mm) Vertical Heatsink
0.45" (11.4mm) Horizontal
Heatsink
0.45" (11.4mm) Vertical Heatsink
0.95" (24.1mm) Horizontal
Heatsink
0.95" (24.1mm) Vertical Heatsink
Standard Pin Length is 0.180"
(4.6mm)
8 All Units (Except SMS)
9 All Units (Except SMS)
All Units (Except DIP, SIP, and SM
1H Packages)
Includes Thermal Pad
All Units (Except DIP, SIP, and SM
1V Packages)
Includes Thermal Pad
All Units (Except DIP, SIP, and SM
2H Packages)
Includes Thermal Pad
All Units (Except DIP, SIP, and SM
2V Packages)
Includes Thermal Pad
All Units (Except DIP, SIP, and SM
3H Packages)
Includes Thermal Pad
All Units (Except DIP, SIP, and SM
3V Packages)
Includes Thermal Pad
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used
in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manu-
factured. Specifications are subject to change without notice.
3


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ HES100YE-AT データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HES100YE-AT

HES SERIES 150 WATT

Power-One
Power-One


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap