|
|
PDF HLMA-KL05 Data sheet ( Hoja de datos )
| Número de pieza | HLMA-KL05 | |
| Descripción | T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps | |
| Fabricantes | Agilent(Hewlett-Packard) | |
| Logotipo | .gif "Agilent(Hewlett-Packard)"){kind=logo} |
|
Hay una vista previa y un enlace de descarga de HLMA-KL05 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
H
T-13/4 (5 mm), T-1 (3 mm), High
Performance, Tinted, Diffused,
AlInGaP, and TS AlGaAs Red
LED Lamps
Technical Data
HLMA-DX05 Series
HLMA-KX05 Series
HLMP-D1XX Series
HLMP-J100/J150 Series
Features
• High Light Output Over a
Wide Range of Currents
• Popular T-1 and T-1 3/4
Packages
• Choice of Three Colors
Amber
Reddish-Orange
Deep Red
• Wide Viewing Angles
• Long Life: Solid State
Technology
• Available on Tape and Reel
Applications
• Outdoor Message Boards
• Automotive Lighting
• Portable Equipment
• Medical Equipment
• Changeable Message Signs
Description
The HLMA-D/KXXX series tinted,
diffused, solid state lamps utilize
the newly developed aluminum
indium gallium phosphide
(AlInGaP) LED technology. This
technology has a very high
luminous efficiency, capable of
producing high light output over a
wide range of drive currents.
These LED lamps are available
with a choice of two colors, 592
nm amber and 615 nm reddish-
orange, and with two viewing
angles, 65° and 60°.
The HLMP-D/JXXX series tinted,
diffused solid state lamps utilize
the highly optimized transparent
substrate aluminum gallium
arsenide (TS AlGaAs) LED
technology. This technology has a
very high luminous efficiency,
Device Selection Guide
Package Description
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-13/4 (5 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Standard Current
T-1 (3 mm), Tinted, Diffused,
Diffused, Low Current
Viewing
Angle
2θ1/2
65°
60°
40°
Amber
λd = 592 nm
HLMA-
DL05
HLMA-
KL05
25°
55°
55°
Reddish-
Orange
λd = 615 nm
HLMA-
DH05
HLMA-
KH05
Deep
Red
λd = 644 nm
HLMP-
D115
HLMP-
D120
HLMP-
J100
HLMP-
J150
Package
Outline
A
B
A
A
C
C
5964-9287E
1-49
1 page  
HLMP-D115/D120/J100/J150 TS AlGaAs Red Lamps
Absolute Maximum Ratings at TA = 25°C
Parameter
HLMP-
D115
HLMP-
D120
HLMP-
J100
HLMP-
J150
DC Forward Current[1]
50 50
50 50
Peak Forward Current[2]
300 300
300 300
Average Input Power[2]
100 100
100 100
Reverse Voltage (IR = 100 µA)
Operating Temperature Range
5
-55 to
+100
5
-55 to
+100
5
-55 to
+100
5
-55 to
+100
Storage Temperature Range
-55 to
+100
-55 to
+100
-55 to
+100
-55 to
+100
Junction Temperature
Soldering Temperature
[1.59 mm (0.06 in.) below seating plane]
110
260°C for 5 second
Notes:
1. Derate linearly as shown in Figure 12.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 13.
Units
mA
mA
mW
V
°C
°C
°C
Optical Characteristics at TA = 25°C
Part Number
HLMP-
Luminous
Intensity
IV (mcd)
@ 20 mA[1]
Min. Typ.
Peak
Wavelength
λpeak (nm)
Typ.
Color,
Dominant
Wavelength
λd[2] (nm)
Typ.
Viewing
Angle
2 θ1/2
Degrees[3]
Typ.
Luminous
Efficacy
ηv
(lm/w)
D115
138 250
654
644 40 85
D120
138 350
654
644 25 85
J100
39 175
654
644 55 85
J150
1.3 3.0
654
644 55 85
Notes:
1. φv is the total luminous flux output as measured with an integrating sphere.
2. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25°C
Part
Number
HLMP-
Forward
Voltage
VF (Volts)
@ IF = 20 mA
Min. Typ.
Reverse
Breakdown
VR (Volts)
@ IR = 100 µA
Min. Typ.
Capacitance
C (pF)
VF = 0
f = 1 mHz
Typ.
D115
1.85 2.4
5 20
20
D120
1.85 2.4
5 20
20
J100
1.85 2.4
5 20
20
J150
1.6 1.9
5 20
20
Thermal
Resistance
RθJ-PIN (°C/W)
260
260
290
290
Speed of Response
τs (ns)
Time Constant
e-t/τs
Typ.
45
45
45
45
1-53
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet HLMA-KL05.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HLMA-KL00 | T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance AlInGaP LED Lamps | Agilent(Hewlett-Packard) |
| HLMA-KL05 | T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps | Agilent(Hewlett-Packard) |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |