DataSheet.jp

HLMA-KH00 の電気的特性と機能

HLMA-KH00のメーカーはAgilent(Hewlett-Packard)です、この部品の機能は「T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance AlInGaP LED Lamps」です。


製品の詳細 ( Datasheet PDF )

部品番号 HLMA-KH00
部品説明 T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance AlInGaP LED Lamps
メーカ Agilent(Hewlett-Packard)
ロゴ Agilent(Hewlett-Packard) ロゴ 




このページの下部にプレビューとHLMA-KH00ダウンロード(pdfファイル)リンクがあります。

Total 7 pages

No Preview Available !

HLMA-KH00 Datasheet, HLMA-KH00 PDF,ピン配置, 機能
H
T-13/4 (5 mm), T-1 (3 mm), High
Performance AlInGaP LED
Lamps
Technical Data
SunPower Series
HLMA-CX00 Series
HLMA-DX00 Series
HLMA-KX00 Series
HLMT-CX00 Series
HLMT-DX00 Series
Features
• Outstanding LED Material
Efficiency
• High Light Output over a
Wide Range of Currents
• Low Electrical Power
Dissipation
• CMOS/MOS Compatible
• Colors: 590/592 nm Amber,
615/617 nm and 622 nm
Reddish-Orange
• Variety of Packages Available
Applications
• Outdoor Message Boards
• Safety Lighting Equipment
• Signaling Applications
• Emitter for Emitter/
Detector Applications
• Changeable Message Signs
• Portable Equipment
• Medical Equipment
• Automotive Lighting
• Alternative to Incandescent
Lamps
Description
These untinted, non-diffused, solid
state lamps utilize the latest
absorbing/transparent substrate
aluminum indium gallium phos-
phide (AS/TS AlInGaP) LED tech-
nology. These materials have a very
high luminous efficiency, capable
of producing high light output over
a wide range of drive currents. In
addition, these LED lamps are at
wavelengths ranging from amber
to reddish orange and at viewing
angles ranging from 7 to 45
degrees.
5963-2323E
1-37

1 Page





HLMA-KH00 pdf, ピン配列
Absolute Maximum Ratings at TA = 25°C
(T-13/4 Package)
DC Forward Current[1,4,5] ........................................................... 50 mA
Peak Forward Current[2] ........................................................... 200 mA
Time Average Input Power[2] ................................................... 103 mW
Transient Forward Current[3] (10 µs Pulse) .............................. 500 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
Operating Temperature Range .......................................... -40 to 100°C
Storage Temperature ......................................................... -40 to 120°C
Junction Temperature ................................................................. 130°C
Soldering Temperature .......................................... 260°C for 5 seconds
[1.59 mm (0.06 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the
Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can
withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 and 30 mA are recommended for best long term
performance.
5. Operation at currents below 10 mA is not recommended, please contact your
Hewlett-Packard sales representative.
Absolute Maximum Ratings at TA = 25°C (T-1 Package)
DC Forward Current[1,4,5] ........................................................... 50 mA
Peak Forward Current[2] ........................................................... 200 mA
Time Average Input Power[2] ................................................... 103 mW
Transient Forward Current[3] (10 µs Pulse) .............................. 500 mA
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
Operating Temperature Range .......................................... -40 to 100°C
Storage Temperature ......................................................... -40 to 100°C
Junction Temperature .................................................................. 110°C
Solder Temperature ................................................ 260°C for 5 seconds
[1.59 mm (0.06 in.) below seating plane]
Notes:
1. Derate linearly as shown in Figure 4.
2. Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the
Max Allowable Time Average Power as specified in Figure 5.
3. The transient peak current is the maximum nonrecurring peak current the device can
withstand without damaging the LED die and wire bonds.
4. Drive Currents between 10 mA and 30 mA are recommended for best long term
performance.
5. Operation at currents below 10 mA is not recommended, please contact your
Hewlett-Packard sales representative.
1-39


3Pages


HLMA-KH00 電子部品, 半導体
1.0
AMBER
0.5
REDDISH-ORANGE
0
550
594 600
621 630
WAVELENGTH
650
Figure 1. Relative Intensity vs. Wavelength.
700
200
180
160
140
120
100
80
60
40
20
0
1.0 1.5 2.0 2.5 3.0
VF – FORWARD VOLTAGE – V
Figure 2a. Forward Current vs.
Forward Voltage, AS-AlInGaP.
100
90
80
70
60
50
40
30
20
10
0
1.5 2.0 2.5 3.0 3.5
VF – FORWARD VOLTAGE – V
2.5
2.0
1.5
1.0
0.5
0.0
0
10 20 30 40 50
IF – DC FORWARD CURRENT – mA
60
50
40
RθJ-A = 585 °C/W
30
RθJ-A = 780 °C/W
20
10
0
0 20 40 60 80 100 120 140
TA – AMBIENT TEMPERATURE – °C
Figure 2b. Forward Current vs.
Forward Voltage, TS-AlInGaP.
Figure 3. Relative Luminous Intensity
vs. Forward Current. Derating Based
on T MAX.
J
Figure 4a. Maximum DC Current vs.
Ambient Temperature for AS T-13/4
Lamps. Derating Based on
TJMAX = 130°C.
60
50
40
RθJ-A = 566 °C/W
30
RθJ-A = 600 °C/W
20
10
0
0 20 40 60 80 100 120 140
TA – AMBIENT TEMPERATURE – °C
50
45
40
RθJ-A = 618 °C/W
35
30
RθJ-A = 412 °C/W
25
20
15
10
5
0
0 10 20 30 40 50 60 70 80 90 100
TA – AMBIENT TEMPERATURE – °C
f > 1 KHz
50
40
30
f > 100 Hz
20
f > 300 Hz
10
0
50
100
150
200
IPEAK – PEAK FORWARD CURRENT – mA
Figure 4b. Maximum DC Current vs.
Ambient Temperature for TS T-13/4
Lamps. Derating Based on
T MAX
J
=
130°C.
Figure 4c. Maximum Forward Current
vs. Ambient Temperature for T-1
Lamps. Derating Based on
T Max
J
=
110
°C.
Figure 5. Maximum Average Current
vs. Peak Forward Current.
1-42

6 Page



ページ 合計 : 7 ページ
 
PDF
ダウンロード
[ HLMA-KH00 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HLMA-KH00

T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance AlInGaP LED Lamps

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)
HLMA-KH05

T-13/4 (5 mm)/ T-1 (3 mm)/ High Performance/ Tinted/ Diffused/ AlInGaP/ and TS AlGaAs Red LED Lamps

Agilent(Hewlett-Packard)
Agilent(Hewlett-Packard)


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap