DataSheet.jp

HIP7038A8 の電気的特性と機能

HIP7038A8のメーカーはIntersil Corporationです、この部品の機能は「J1850 8-Bit 68HC05 Microcontroller 8K EEPROM Version」です。


製品の詳細 ( Datasheet PDF )

部品番号 HIP7038A8
部品説明 J1850 8-Bit 68HC05 Microcontroller 8K EEPROM Version
メーカ Intersil Corporation
ロゴ Intersil Corporation ロゴ 




このページの下部にプレビューとHIP7038A8ダウンロード(pdfファイル)リンクがあります。
Total 5 pages

No Preview Available !

HIP7038A8 Datasheet, HIP7038A8 PDF,ピン配置, 機能
HIP7038A8
PRELIMINARY
April 1994
J1850 8-Bit 68HC05 Microcontroller
8K EEPROM Version
Features
Description
• Direct Replacement for HIP7030A2/A8 Microcontrollers
- All Hardware and Software Features
- Equivalent Timing and Performance
• Memory
- 176 Bytes of RAM
- 7744 Bytes of Programmable EEPROM
- 242 Bytes of Bootstrap Program
• Single 5V Supply
• 10MHz Operating Frequency (5.0MHz Internal Bus
Frequency) at 5V.
• 28 Lead Small Outline Ceramic Package
- Same Terminal Assignment as HIP7030A2
and HIP7030A8
The HIP7038A8 HCMOS Microcomputer is an EEPROM
version of the HIP7030A family of low-cost single-chip J1850
microcontrollers. These microcontrollers provide the system
designer with a complete set of building blocks for imple-
menting a “Class B” VPW multiplexed communications
network interface, which fully complies with SAE Recom-
mended Practice J1850. The HIP7038A8 contains all hard-
ware and software features of the HIP7030A2/A8
microcontrollers with equivalent timing, performance charac-
teristics, and an identical footprint.
The device can be programmed using the HIP7038A8
EEPROM Programmer available from Intersil. In-circuit
Emulation Tools are also provided for system development.
Ordering Information
TEMPERATURE
PART NUMBER
RANGE
PACKAGE
HIP7038A8F
-40oC to +85oC 28 Lead Ceramic SOIC
Pinout
HIP7038A8 (SOIC FLATPACK)
TOP VIEW
TCAP 1
TCMP 2
VPWIN 3
VPWOUT 4
RESET 5
IRQ 6
VDD 7
PA7 8
PA6 9
PA5 10
PA4 11
PA3 12
PA2 13
PA1 14
28 SS
27 MISO
26 MOSI
25 SCK
24 OSCIN
23 OSCOUT
22 VSS
21 PD0
20 PD1
19 PD2, V2
18 PD3, V3
17 PD4, VREF
16 OSCB
15 PA0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
407-727-9207 | Copyright © Intersil Corporation 1999
9-99
File Number 3647.1

1 Page





HIP7038A8 pdf, ピン配列
Specifications HIP7038A8
Absolute Maximum Ratings
Thermal Information
Supply Voltage (VDD) . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +6.0V
Input or Output Voltage
Pins with VDD Diode . . . . . . . . . . . . . . . . . . . . -0.3V to VDD +0.3V
Pins without VDD Diode. . . . . . . . . . . . . . . . . . . . . -0.3V to +10.0V
Current Drain Per Pin, I (Excluding VDD and VSS) . . . . . . . . 25mA
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 2
Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21000 Gates
Operating Temperature Range (TA) . . . . . . . . . . . . -40oC to +125oC
Storage Temperature Range (TSTG) . . . . . . . . . . . . -65oC to +150oC
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150oC
Lead Temperature (During Soldering) . . . . . . . . . . . . . . . . +265oC
1/16in. ± 1/32in. (1.59 ± 0.79mm) from case for 10s Max.
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation
of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Operating Conditions
Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V
Operating Temperature Range . . . . . . . . . . . . . . . . . -40oC to +85oC
Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +0.8V
Input High Voltage. . . . . . . . . . . . . . . . . . . . . . . . . .(0.8•VDD) to VDD
Input Rise and Fall Time
CMOS Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100ns Max.
CMOS Schmitt Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . .Unlimited
DC Electrical Specifications VDD = 5VDC ±10%, VSS = 0VDC, TA = -40oC to +85oC Unless Otherwise Specified.
PARAMETERS
SYMBOL
CONDITIONS
MIN TYP MAX
UNITS
SUPPLY CURRENT
RUN
WAIT
STOP
Powerdown Input Voltage:
RESET, IRQ, VPWIN, OSCIN
IRUN
IWAIT
ISTOP
VINPD
TA = +25oC
TA = -40oC to +85oC
VDD = 0
- 50 - mA
- 4 - mA
- 100 -
µA
- 100 -
µA
-0.3 -
9V
NOTE:
1. This device contains circuitry to protect the inputs against damage due to high static voltages of electric fields; however, it is advised that
normal precautions be taken to avoid application of any voltage higher than maximum rated voltages to this high impedance circuit. For
proper operation it is recommended that VIN and VOUT be constrained to the range VSS<(VIN or VOUT)<VDD. Reliability of operation is
enhanced if unused inputs except OSC2 are connected to an appropriate logic voltage level (e.g., either VSS or VDD).
9-101


3Pages





ページ 合計 : 5 ページ
 
PDF
ダウンロード
[ HIP7038A8 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
HIP7038A8

J1850 8-Bit 68HC05 Microcontroller 8K EEPROM Version

Intersil Corporation
Intersil Corporation
HIP7038A8F

J1850 8-Bit 68HC05 Microcontroller 8K EEPROM Version

Intersil Corporation
Intersil Corporation


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap