|
|
PDF HIP1031 Data sheet ( Hoja de datos )
| Número de pieza | HIP1031 | |
| Descripción | Half Amp High Side Driver with Overload Protection | |
| Fabricantes | Intersil Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de HIP1031 (archivo pdf) en la parte inferior de esta página. Total 4 Páginas | ||
|
No Preview Available !
HIP1031
December 1997
Half Amp High Side Driver with
Overload Protection
Features
• Over Operating Range. . . . . . . . . . . . . . -40oC to 125oC
- VSAT at 0.6A . . . . . . . . . . . . . . . . . . . . . . . . . 1.0V Max
- Power Supply Range . . . . . . . . . . . . . . . . 4.5V to 25V
• Over-Voltage Shutdown Protected
• Negative Output Voltage Clamp
• Over-Current Limiting
• Thermal Limiting Protection
• Load Dump . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60VPEAK
• Reverse Battery Protection . . . . . . . . . . . . . . . . .To -16V
• CMOS/TTL Logic Level Control Input
Applications
• Motor Driver/Controller
• Driver for Solenoids, Relays & Lamps
• MOSFET and IGBT Driver
• Driver for Temperature Controller
Ordering Information
PART
TEMP.
NUMBER RANGE (oC)
PACKAGE
HIP1031AS -40 to 125 5 Ld TS-001AA SIP
PKG.
NO.
Z5.067C
Description
The HIP1031 is a High Side Driver Power Integrated Circuit
designed to switch power supply voltage to an output load. It
is the equivalent of a PNP pass transistor operated as a
protected high side current switch in the saturated ON state
with low forward voltage drop at the maximum rated current. It
has low output leakage and low idle current in the OFF state.
The Functional Block Diagram for the HIP1031 shows the
protection control circuit functions of over-current, overvoltage
and over-temperature. A small metal resistor senses
overcurrent in the power supply path of the pass transistor
and load. Overvoltage detection and shutdown of the output
driver occurs when a comparator determines that the supply
voltage has exceeded a comparator reference level. Over-
temperature is sensed from a VBE differential sense element
that is thermally close to the output drive transistor. In addition
to the input detected overvoltage protection, negative peak
voltage of an inductive load is clamped with an internal zener
diode. An internal bandgap supply voltage source provides a
stable voltage reference over the chip operating temperature
range, providing bias and reference control for the protection
circuits.
The HIP1031 is particularly well suited for driving lamps,
relays, and solenoids in automotive and industrial control
applications where voltage and current overload protection at
high temperatures is required. The HIP1031 is supplied in a 5
lead TS-001AA Power SIP package.
Pinout
HIP1031 (SIP)
TOP VIEW
Functional Block Diagram
5 VIN (CONTROL)
4 GND
3 TAB GND
2 VOUT (LOAD)
1 VCC (SUPPLY)
VCC
1
VBATT
SUPPLY
OVER-
VOLTAGE
SHUTDOWN
RS
CURRENT
LIMIT
THERMAL
LIMIT
CONTROL
CIRCUIT
VOUT
2
NEG.
CLAMP
ZENER
VIN
5
CONTROL
TAB
3
GND
HIP1031
4
GND
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1
File Number 3596.6
1 page | ||
| Páginas | Total 4 Páginas | |
| PDF Descargar | [ Datasheet HIP1031.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| HIP1030 | 1A High Side Driver with Overload Protection | Intersil Corporation |
| HIP1030AS | 1A High Side Driver with Overload Protection | Intersil Corporation |
| HIP1031 | Half Amp High Side Driver with Overload Protection | Intersil Corporation |
| HIP1031AS | Half Amp High Side Driver with Overload Protection | Intersil Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |