DataSheet.jp

ISL95839 PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ISL95839
部品説明 Dual 3+1 PWM Controller
メーカ Intersil
ロゴ Intersil ロゴ 



Total 30 pages
		

No Preview Available !

ISL95839 Datasheet, ISL95839 PDF,ピン配置, 機能
Dual 3+1 PWM Controller with Current Monitor for
IMVP-7/VR12™ CPUs
ISL95839
The ISL95839 Pulse Width Modulation (PWM) controller IC
provides a complete solution for IMVP-7/VR12™ compliant
microprocessor and graphic processor core power supplies. It
provides the control and protection for two Voltage Regulators
(VRs). The first VR, typical for Vcore, incorporates 2 integrated
drivers and can operate in 3-, 2- or 1-phase configurations. The
second VR, typical for Graphics, incorporates 1 integrated
driver. The two VRs share a serial control bus to communicate
with the CPU and achieve lower cost and smaller board area
compared with the two-chip approach.
Both VRs utilize Intersil’s Robust Ripple Regulator R3
Technology™. The R3 modulator has numerous advantages
compared to traditional modulators, including faster transient
response, variable switching frequency during load transients,
and improved light load efficiency due to its ability to
automatically change switching frequency.
The ISL95839 has several other key features. Both outputs
support either DCR current sensing with a single NTC
thermistor for DCR temperature compensation, or more
precise resistor current sensing if desired. Both outputs come
with remote voltage sense, programmable VBOOT voltage,
IMAX, and switching frequency, adjustable overcurrent
protection and separate Power-Good signals.
Features
• Serial data bus
• Dual outputs:
- Configurable 3-, 2- or 1-phase for the 1st output using two
integrated gate drivers
- 2nd output using an integrated gate driver
• R3™ Modulator
- Excellent transient response
- High light load efficiency
• 0.5% system accuracy over-temperature
• Supports multiple current sensing methods
- Lossless inductor DCR current sensing
- Precision resistor current sensing
• Differential remote voltage sensing
• Programmable VBOOT voltage at start-up
• Resistor programmable IMAX, switching frequency for both
outputs
• Output current monitor (IMON and IMONG)
• Adaptive body diode conduction time reduction
Applications
• IMVP-7/VR12 compliant computers
Vin
VR2
Vin
ISL95839
ISL6208B
DRIVER
Vin
VR1
Vin
0.91
0.90
0.89
0.88
0.87
0.86
0.85
0.84
0.83
0.82
0.81
0.80
0
VIN = 19V
VIN = 12V
VIN = 8V
6 12 18 24 30 36 42 48 54 60 66
IOUT (A)
FIGURE 1. SIMPLIFIED APPLICATION CIRCUIT
FIGURE 2. LOAD LINE REGULATION
May 9, 2013
FN8315.0
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas LLC 2013. All Rights Reserved
Intersil (and design) and R3 Technology™ are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
Free Datasheet http://www.datasheet4u.com/

1 Page





ページ 合計 : 30 ページ
PDF
ダウンロード
[ ISL95839.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL95831

3+1 Voltage Regulator

Intersil
Intersil
ISL95833

Dual 2+1 PWM Controller for IMVP-7 VR12 CPUs

Intersil Corporation
Intersil Corporation
ISL95836

3+2 Voltage Regulator

Intersil
Intersil
ISL95839

Dual 3+1 PWM Controller

Intersil
Intersil

www.DataSheet.jp    |   2019   |  メール    |   最新    |   Sitemap