|
|
PDF CPC1966B Data sheet ( Hoja de datos )
| Número de pieza | CPC1966B | |
| Descripción | AC Power Switch | |
| Fabricantes | IXYS | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de CPC1966B (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
INTEGRATED CIRCUITS DIVISION
Parameter
AC Operating Voltage
Load Current
On-State Voltage Drop
Blocking Voltage
Rating
20 - 240
3
0.8
800
Units
Vrms
Arms
Vrms (at IL = 3Arms)
VP
Features
• Load Current up to 3Arms
• 800VP Blocking Voltage
• 5mA Sensitivity
• 5000Vrms Input to Output Isolation
• Off-State dV/dt: 1000V/s Minimum
• 12.5mm External Creepage Distance with
Appropriate Layout
• Zero-Cross Switching
• DC Control, AC Output
• Optically Isolated
• TTL and CMOS Compatible
• Low EMI and RFI Generation
• High Noise Immunity
Applications
• Programmable Control
• Process Control
• Power Control Panels
• Remote Switching
• Gas Pump Electronics
• Contactors
• Large Relays
• Solenoids
• Motors
• Heaters
CPC1966B
AC Power Switch
Description
CPC1966B is an AC Solid State Switch utilizing
dual power SCR outputs. This device also includes
zero-cross turn-on circuitry and is specified with a
blocking voltage of 800VP .
In addition, the tightly controlled zero-cross circuitry
ensures low noise switching of AC loads by
minimizing the generation of transients. The optically
coupled input and output circuits provide 5000Vrms of
isolation and noise immunity between the control and
load circuits. As a result, the CPC1966B is well suited
for industrial environments where electromagnetic
interference would disrupt the operation of plant facility
communication and control systems.
Approvals
• UL 508: Pending
• CSA Industrial Control Switches Approval: Pending
Ordering Information
Part #
CPC1966B
Description
8-Pin Power SOIC (25/Tube)
Pin Configuration
AC Load
87
AC Load
65
ZC
12
N/C + LED
3
– LED
4
N/C
Pb
RoHS
2002/95/EC
DS-CPC1966B-R02
e3
www.ixysic.com
1
Free
Datas
1 page  
INTEGRATED CIRCUITS DIVISION
CPC1966B
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device
CPC1966B
Moisture Sensitivity Level (MSL) Rating
MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device
CPC1966B
Maximum Temperature x Time
245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
Pb
RoHS
2002/95/EC
e3
R02 www.ixysic.com
5
Free Datasheet http://www.datasheet4u.com/
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet CPC1966B.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| CPC1966 | AC Power Switch | IXYS |
| CPC1966 | AC Power Switch |  Clare |
| CPC1966B | AC Power Switch | IXYS |
| CPC1966Y | AC Power Switch | IXYS |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |