|
|
PDF SMBJ9.0CA Data sheet ( Hoja de datos )
| Número de pieza | SMBJ9.0CA | |
| Descripción | (SMBJ5.0A - SMBJ170CA) SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | |
| Fabricantes | PACELEADER | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de SMBJ9.0CA (archivo pdf) en la parte inferior de esta página. Total 2 Páginas | ||
|
No Preview Available !
SMBJ5.0A thru SMBJ170CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
STAND-OFF VOLTAGE 5.0 TO 170 VOLTS
600 Watt Peak Pulse Power
SMB/DO-214AA
.075(1.91)
.083(2.11)
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications in order to
optimize board space
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
Excellent clamping capability
Repetition Rate (duty cycle) 0.01%
Fast response time typically less than 1.0ps
from 0 Volts to V (BR) for unidirectional types
Typical IR less than 1mA above 10V
High Temperature solderting 250oC/10seconds at terminals
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
MECHANICAL DATA
Case JEDEC DO-214A molded plastic over glass
passivated junction
Terminals Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity Color band denotes positive end (cathode)
except Bidirectional
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.003 ounce, 0.093gram
DEVICES FOR BIPOLAR APPLICATION
For Bidirectional use C or CA Suffix for types SMBJ5.0 thru types SMBJ170 (e.g. SMBJ5.0C, SMBJ170CA)
Electrical characteristics apply in both directions
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified
RATING
SYMBOL
Peak Pulse Power Dissipation on 10/1000 S waveform
(Note 1, 2, Fig.1)
PPPM
VALUE
Minimum
600
Peak Pulse Current of on 10/1000 S waveform
(Note 1, Fig.3)
IPPM
SEE
TABLE 1
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2,3)
IFSM
100
Operating junction and Storage Temperature Range
IJ
TSTG
-55 to +150
NOTES
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig.2.
2. Mounted on 5.0mm2 (0.03mm thick) Copper Pads to each terminal
3. 8.3ms Single Half Sine-Wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.
UNITS
Watts
Amps
Amps
0C
www.paceleader.tw
1
Free Datasheet http://www.datasheet4u.com
1 page | ||
| Páginas | Total 2 Páginas | |
| PDF Descargar | [ Datasheet SMBJ9.0CA.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| SMBJ9.0C | TVS Diode ( Rectifier ) |  DEC |
| SMBJ9.0C | SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS |  Bytes |
| SMBJ9.0C | Transient Voltage Suppressor 5.0 to 170 Volts 600 Watt |  Micro Commercial Components |
| SMBJ9.0C | BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR |  EIC discrete Semiconductors |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |