DataSheet.jp

ET-1102 の電気的特性と機能

ET-1102のメーカーはRadioShackです、この部品の機能は「900 MHz Digital Spread Spectrum Cordless Telephone」です。


製品の詳細 ( Datasheet PDF )

部品番号 ET-1102
部品説明 900 MHz Digital Spread Spectrum Cordless Telephone
メーカ RadioShack
ロゴ RadioShack ロゴ 




このページの下部にプレビューとET-1102ダウンロード(pdfファイル)リンクがあります。

Total 28 pages

No Preview Available !

ET-1102 Datasheet, ET-1102 PDF,ピン配置, 機能
43-1102.fm Page 1 Tuesday, August 17, 1999 4:37 PM
Cat. No. 43-1102
OWNER’S MANUAL
Please read before using this equipment.
ET-1102
900 MHz Digital Spread Spectrum
Cordless Telephone
with Caller ID/Call Waiting ID
http://www.DataSheet4U.com/

1 Page





ET-1102 pdf, ピン配列
43-1102.fm Page 3 Tuesday, August 17, 1999 4:37 PM
Flash — sends an electronic switch-
hook signal for use with special phone
services, such as Call Waiting.
Tone/Pulse Dialing — lets you use ei-
ther type of service, and you can easily
switch from pulse to tone dialing for
long-distance, bank-by-phone, or other
special services.
Auto Talk — you can set the phone so
you can answer a call simply by lifting
the handset from the base.
Any Key Answer — you can set the
phone so you can press any key to an-
swer a call when the handset is away
from the base.
Hearing-Aid Compatibility — lets you
use your phone with hearing aids that
have a T (telephone) switch.
This telephone has been tested and
found to comply with all applicable UL
and FCC standards.
We recommend you record your
phone’s serial number here. The num-
ber is on the bottom of the base.
Serial Number __________________
Important Caller ID Information
To use the phone’s Caller ID and Caller
ID with Call Waiting features, you must
be in an area where those services are
available and you must subscribe to
those services through your local phone
company.
Where Caller ID is offered, one or more
options are generally available:
• caller’s number only
• caller’s name only
• caller’s name and number
Warning: To prevent fire or shock
hazard, do not expose this product
to rain or moisture.
http://www.DataSheet4U.com/
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
!
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
This symbol is intended to inform you
! that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
3


3Pages


ET-1102 電子部品, 半導体
43-1102.fm Page 6 Tuesday, August 17, 1999 4:37 PM
INSTALLATION
MOUNTING THE PHONE
You can place the ET-1102’s base on a
desk or table, mount it on a standard
wall plate, or mount it directly on a wall.
Choose a location that is:
• near an AC outlet
• near a telephone line jack
• out of the way of normal activities
• away from electrical machinery,
electrical appliances, metal walls or
filing cabinets, wireless intercoms,
alarms, and room monitors
• away from other cordless phones
The base’s location affects the hand-
set’s range. If you have a choice of sev-
eral locations, try each to see which
provides the best performance.
Caution: The supplied RadioShack
adapter was designed specifically for
your ET-1102. Use only the supplied
adapter.
Notes:
• Your telephone connects directly to
a modular phone line jack. If your
phone line jack is not a modular
jack, you can update the wiring
yourself, using jacks and adapters
available from your local Ra-
dioShack store. Or, you can let the
telephone company update the wir-
ing for you.
• The USOC number of the jack to be
installed is RJ11C, or RJ11W for a
wall plate jack.
On a Desk
Follow these steps when you place the
base on a desk or table.
1. Insert the bracket’s tabs into the
base’s upper tab slots as shown,
then press down on the bracket’s
clips and insert them into the clip
slots.
Clip Slots
Clips
Upper Tab Slots
2. Plug one end of the supplied longhttp://www.DataSheet4U.com/
modular cord into the TEL LINE jack
on the back of the base.
3. Plug the modular cord’s other end
into a modular phone line jack.
6

6 Page



ページ 合計 : 28 ページ
 
PDF
ダウンロード
[ ET-1102 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
ET-1102

900 MHz Digital Spread Spectrum Cordless Telephone

RadioShack
RadioShack


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap