|
|
|
|
NDR433.92のメーカーはETCです、この部品の機能は「One-port SAW Resonator」です。 このページではNDR433.92の詳細な仕様と技術情報(パラメータ、電気的特性、ピン配置など)を見つけることができます. |
NDR433.92 の電気的特性と機能
| 部品番号 | NDR433.92 |
| |
| 部品説明 | One-port SAW Resonator | ||
| メーカ | ETC | ||
| ロゴ |  |
||
このページの下部にプレビューとNDR433.92ダウンロード（pdfファイル）リンクがあります。 Total 3 pages
One-port SAW Resonator For wireless Remote Controller
2002
1.Package Dimension(F-11 SMD)
Unit:mm
NO. Function
1 Output/Input
2 GND
3 GND
4 Input/Output
Unit:mm
2. Marking
NDR433.92
http://www.DataSheet4U.net/
2-1.Color: Black or Blue
2-2.Center Frequency(MHz):433.92
3.Performance
3-1.Maximum Rating
DC Voltage VDC
AC Voltage VPP
Operation Temperature
Storage Temperature
RF Power Dissipation
10V
10V(50Hz/60Hz)
-40°C to +85°C
-40°C to +85°C
0 dBm
datasheet pdf - http://www.DataSheet4U.net/
1 Page  
Note: Reference temperature shall be 25 ± 2°C.However, the measurement may
be carried out at 5°C to 35°C unless there is a dispute.
4.Reliability
4.1 Mechanical Shock: The components shall remain within the electrical specifications after
1000 shocks, acceleration 392m/s2,duration 6 milliseconds.
4.2 Vibration Fatigue: The components shall remain within the electrical specifications
after loaded vibration at 20 Hz , amplitude 1.5mm , for 2 hours.
4.3 Terminal Strength: The components shall remain within the electrical specifications
after pulled 2 Kgs weight for 10 seconds towards an axis of each terminal.
4.4 High Temperature Storage: The components shall remain within the electrical
specifications after being kept at the 85°C ±2°C for 48 hours, then kept at room
temperature for 2 hours.
4.5 Low Temperature Storage: The components shall remain within the electrical
specifications after being kept at the -25°C ±2°C for 48 hours ,then kept room
temperature for 2 hours.
4.6 Temperature Cycle: The components shall remain within the electrical specifications
after 5 cycles of high and low temperature testing(one cycle: 80°C for 30 minutes →
25°C for 5 minutes→ -25°C for 30 minutes ) than kept at room temperature for 2 hours.
4.7 Solder-heat Resistance : The components shall remain within the electrical
specifications after dipped in the solder at 260°Cfor 10±1seconds,then kept at room
temperature for 2 hours .(Terminal must be dipped leaving 1.5 mm from the case).
4.8 Solder ability: Solder ability of terminal shall be kept at more than 80% after dipped in
http://www.DataSheet4U.net/
the solder flux at 230°C ± 5°C for 5±1 seconds.
5. Remarks
5.1Static voltage
Static voltage between signal load & ground may cause deterioration & destruction
of the component. Please avoid static voltage .
5.2Ultrasonic cleaning
Ultrasonic vibration may cause deterioration & destruction of the component. Please
avoid ultrasonic cleaning.
5.3Soldering
Only leads of component may be soldered. Please avoid soldering another part of
component.
datasheet pdf - http://www.DataSheet4U.net/
3Pages | |||
| ページ | 合計 : 3 ページ | ||
|
|
PDF ダウンロード | [ NDR433.92 datasheet.PDF ] | |
|
NDR433.92 データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 また、NDR433.92のさまざまなアプリケーション回路とユースケースを使用して独自の設計に統合する方法を理解するのに役立ちます。 |
共有リンク
Link :おすすめデータシート
|
あなたの検索基準に基づいて、興味のある他のデータシートを見つけました。同様の部品も一緒に検討することをお勧めします。 |
| 部品番号 | 部品説明 | メーカ |
| NDR433.92 | SAW Resonator |  Winnsky |
| NDR433.92 | One-port SAW Resonator | ETC |