DataSheet.jp

ISL8200AM PDF Datasheet ( 特性, スペック, ピン接続図 )

部品番号 ISL8200AM
部品説明 Complete Current Share 10A DC/DC Power Module
メーカ Intersil
ロゴ Intersil ロゴ 



Total 24 pages
		

No Preview Available !

ISL8200AM Datasheet, ISL8200AM PDF,ピン配置, 機能
DATASHEET
Complete Current Share 10A DC/DC Power Module
ISL8200AM
The ISL8200AM is a simple and easy to use high power,
current-sharing DC/DC power module for Datacom/Telecom/
FPGA power hungry applications. All that is needed is the
ISL8200AM, a few passive components and one VOUT setting
resistor to have a complete 10A design ready for market.
The ease of use virtually eliminates the design and
manufacturing risks while dramatically improving time to
market.
Need more output current? Parallel up to six ISL8200AM
modules to scale up to a 60A solution (see Figure 7 on
page 10).
The simplicity of the ISL8200AM is in its "off-the-shelf",
unassisted implementation versus a discrete implementation.
Patented current sharing in multiphase operation greatly
reduces ripple currents, BOM cost and complexity. For
example, parallel 2 for 20A and up to 6 for 60A. The output
voltage can be precisely regulated to as low as 0.6V with ±1%
output voltage regulation over line, load and temperature
variations.
The ISL8200AM’s thermally enhanced, compact QFN package,
operates at full load and over-temperature, without requiring
forced air cooling. It's so thin it can even fit on the backside of
the PCB. Easy access to all pins with few external components,
reduces the PCB design to a component layer and a simple
ground layer.
Features
• Complete switch mode power supply in one package
• Patented current share architecture reduces layout
sensitivity when modules are paralleled
• Programmable phase shift (1- to 6-phase)
• Extremely low profile (2.2mm height)
• Input voltage range +3V to +20V at 10A, current share up to
60A
• A single resistor sets VOUT from +0.6V to +6V
• Output overvoltage, overcurrent and over-temperature
protection and undervoltage indication
• RoHS compliant
Applications
• Servers, telecom and datacom applications
• Industrial and medical equipment
• Point of load regulation
Related Literature
AN1738 “ISL8200AMEV1PHZ Evaluation Board User’s
Guide”
ISL8200AM iSim Model - (Product Information Page)
AN1786 “Reducing the Switching Frequency of the
ISL8200M and ISL8200AM Power Modules”
Complete Functional Schematic
VIN = 4.5V TO 20V
PVIN = 3V TO 20V
PVIN
VIN
VOUT
ISL8200AM
POWER MODULE
EN VOUT_SET
FF VSEN_REM-
V0UT =
0.6V TO 6.0V
RSET
ISHARE
PGND1
10µF
5k
NOTE: For input voltage higher than 4.5V, VIN can be tied to PVIN directly
(see Figure 24 on page 13 for details).
FIGURE 1. COMPLETE 10A DESIGN, JUST SELECT RSET FOR THE
DESIRED VOUT
ISL8200AM Package
2.2mm
15mm
15mm
FIGURE 2. THE 2.2mm HEIGHT IS IDEAL FOR THE BACKSIDE OF
PCB WHEN SPACE AND HEIGHT IS A PREMIUM
July 30, 2015
FN8271.5
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2012, 2013, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.

1 Page





ページ 合計 : 24 ページ
PDF
ダウンロード
[ ISL8200AM.PDF ]

共有リンク

Link :

おすすめデータシート

部品番号部品説明メーカ
ISL8200AM

Complete Current Share 10A DC/DC Power Module

Intersil
Intersil
ISL8200AMM

Complete Current Share 10A DC/DC Power Module

Intersil
Intersil

www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap