|
|
PDF AG101 Data sheet ( Hoja de datos )
| Número de pieza | AG101 | |
| Descripción | GaAs MMIC Gain Block | |
| Fabricantes | TriQuint Semiconductor | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AG101 (archivo pdf) en la parte inferior de esta página. Total 6 Páginas | ||
|
No Preview Available !
AG101
GaAs MMIC Gain Block
Product Features
60 – 3000 MHz
14 dB Gain
2.4 dB Noise Figure
+32 dBm OIP3
Single +3.3 or +4.5 Supply
Internally matched to 50
Lead-free/Green/RoHS-compliant
SOT-89 Package
MTTF > 10,000 years
Applications
Final stage amplifiers for Repeaters
Mobile Infrastructure
DBS / WLL / WLAN / WiBro
Defense / Homeland Security
Product Description
Functional Diagram
The AG101 is a general-purpose gain block that offers
good dynamic range and low noise figure in a low-cost
surface-mount package. The combination of near-
constant OIP3 and low noise figure performance over
frequency makes it attractive for both narrowband and
broadband applications. The device combines dependable
performance with superb quality to maintain MTTF
values exceeding 10,000 years at mounting temperatures
of +85 C and is available in the environmentally-
friendly lead-free/green /RoHS-compliant SOT-89
package.
The AG101 uses a high reliability GaAs MMIC
technology and only requires DC-blocking and bypass
capacitors, and an inductive RF choke for operation.
Internal matching provides a 50 ohm input / output
impedance minimizing the number of required external
components.
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input / Base
Output / Collector
Ground
Pin No.
1
3
2, 4
The broadband MMIC amplifier is well suited for various
current and next generation wireless technologies such as
GPRS, GSM, CDMA, and W-CDMA. In addition, the
AG101 will work for other applications within the 60 to
3000 MHz frequency range such as fixed wireless.
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss (5)
Output Return Loss
Output P1dB
Output IP3 (2)
Noise Figure (3)
Operating Current Range
Supply Voltage
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
mA
V
Min
60
13
+28
40
Typ
800
14
8.5
20
+15
+32
2.4
50
4.5
Max
3000
16
75
1. Test conditions unless otherwise noted: T = 25 ºC, 50 system.
2. OIP3 measured with two tones at an output power of +2.5 dBm/tone separated by 10 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
3. Noise figure can be optimized by matching the input for optimal return loss.
4. A supply voltage between 3 to 4.5V can be used for the devices.
Typical Performance (1)
Parameterwww.DataSheet.net/
Frequency
S21
S11 (5)
S22
Output P1dB
Output IP3
Noise Figure
Supply Voltage
Device Current
Units
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Typical
900 1900 900 1900
14 12.8 14 12.5
-10 -9 -10 -9
-27 -22 -28 -19
+15 +15 +14 +14
+32.5 +33.1 +32 +32.5
2.4 2.6 2.2 2.4
+4.5 +3.3
50 48
Not Recommended for
New Designs
Absolute Maximum Rating
Recommended Replacement
Part: TQP3M9005
Parameter
Storage Temperature
DC Voltage
RF Input Power (continuous)
Junction Temperature
Thermal Resistance
Junction Temperature for >106 hours MTTF
Rating
-55 to +150 C
+5.5 V
+4 dBm
+160 C
88 C / W
Operation of this device above any of these parameters may cause permanent
damage.
Ordering Information
Part No.
Description
AG101-G
GaAs MMIC Gain Block
(lead-free/green/RoHS-compliant SOT-89 Pkg)
Standard T/R size = 1000 pieces on a 7” reel.
Specifications and information are subject to change without notice
TriQuint Semiconductor, Inc Phone +1-503-615-9000 FAX: +1-503-615-8900 e-mail: [email protected] Web site: www.TriQuint.com
Page 1 of 6 May 2012
Datasheet pdf - http://www.DataSheet4U.co.kr/
1 page  
AG101
GaAs MMIC Gain Block
Reference Design: 450 MHz
+4.5 V
C=1e4 pF
C=1000 pF
L=15 nH
NET="AG101"
L=82 nH
C=1000 pF
C=1.2 pF
16 0
DB(|S[1,1]|) (R)
DB(|S[2,1]|) (L)
DB(|S[2,2]|) (R)
15 -5
14 -10
13 -15
12 -20
11 -25
0.3 0.35 0.4 0.45 0.5 0.55 0.6 0.65 0.7
Frequency (GHz)
Reference Design: 800 MHz
C=100 pF
L=6.8 nH
+4.5 V
C=1e4 pF
C=100 pF
NET="AG101"
L=33 nH
C=100 pF
Reference Design: 1900 / 2140 MHz
+4.5 V
CAP
ID=C1
C=3.9 pF
TLINP
ID=TL1
Z0=50 Ohm
L=150 mil
Eeff=3.4
Loss=0
F0=2 GHz
CAP
C=1e4 pF
CAP
C=56 pF
SUBCKT
NET="AG101"
IND
ID=L2
L=33 nH
IND
ID=L1
L=3.3 nH
CAP
ID=C3
C=56 pF
www.DataSheet.net/
15 0
14 -5
DB(|S(1,1)|) (R) DB(|S(2,1)|) (L) DB(|S(2,2)|) (R)
13 -10
12 -15
11 -20
10
0.6 0.7 0.8 0.9
1
Frequency (GHz)
-25
1.1 1.2
14 0
13 -5
12 -10
11 -15
10
9
1.5
DB(|S(1,1)|) (R) DB(|S(2,1)|) (L)
1.6 1.7 1.8 1.9
2
Frequency (GHz)
-20
DB(|S(2,2)|) (R)
-25
2.1 2.2 2.3
Reference Design: CATV Single-ended Operation
16
0
+4.5 V
C=1.8e4 pF
15
14
-5
-10
Z=75 Ohm L=4.7 nH
NET="AG101"
L=100 nH
R=5 Ohm
C=1000 pF
Z=75 Ohm
13 -15
12
11
0
DB(|S[1,1]|) (R)
0.2
DB(|S[2,1]|) (L)
0.4 0.6
Frequency (GHz)
-20
DB(|S[2,2]|) (R)
0.8
-25
1
Specifications and information are subject to change without notice
TriQuint Semiconductor, Inc Phone +1-503-615-9000 FAX: +1-503-615-8900 e-mail: [email protected] Web site: www.TriQuint.com
Page 5 of 6 May 2012
Datasheet pdf - http://www.DataSheet4U.co.kr/
5 Page | ||
| Páginas | Total 6 Páginas | |
| PDF Descargar | [ Datasheet AG101.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AG100 | Diode (spec sheet) |  American Microsemiconductor |
| AG101 | High Dynamic Range Gain Block |  ETC |
| AG101 | GaAs MMIC Gain Block | TriQuint Semiconductor |
| AG101-PCB | High Dynamic Range Gain Block | ETC |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |