DataSheet.jp

DTA014EEB の電気的特性と機能

DTA014EEBのメーカーはROHM Semiconductorです、この部品の機能は「100mA/-50V Digital transistors」です。


製品の詳細 ( Datasheet PDF )

部品番号 DTA014EEB
部品説明 100mA/-50V Digital transistors
メーカ ROHM Semiconductor
ロゴ ROHM Semiconductor ロゴ 




このページの下部にプレビューとDTA014EEBダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

DTA014EEB Datasheet, DTA014EEB PDF,ピン配置, 機能
-100mA/-50V Digital transistors(with built-in resistors)
DTA014EM / DTA014EEB / DTA014EUB
Features
1) Built-in bias resistors enable the configuration of
an inverter circuit without connecting external input resistors.
(See equivalent circuit)
2) The bias resistors consist of thin-film resistors with complete
isolation to allow positive biasing of the input.
They also have the advantage of almost completely
eliminating parasitic effects.
3) Only the on/off conditions need to be set for operation,
making the device design easy.
Dimensions (Unit : mm)
VMT3
EMT3F
Abbreviated symbol : 30
(3)
Structure
PNP epitaxial planar silicon transistor
(Resistor built-in type)
Applications
Inverter, Interface, Driver
Packaging specifications
Package
Type
Packaging Type
Code
Basic ordering
unit (pieces)
DTA014EM
DTA014EEB
DTA014EUB
UMT3F
(1) (2)
Abbreviated symbol : 30
2.0
0.32
(3)
0.9
VMT3
Taping
T2L
8000
-
-
(1)
0.65 0.65
1.3
(2)
0.13
Abbreviated symbol : 30
www.DataSheet.co.kr
EMT3F
Taping
TL
UMT3F
Taping
TL
3000
3000
Equivalent circuit
R1
IN
R2
OUT
GND(+)
--
-
-
IN OUT
GND(+)
  R1=R2=10kΩ
Absolute maximum (Ta=25C)
Parameter
Supply voltage
Input voltage
Collector current *1
Output current
Power dissipation *2
Junction temperature
Range of storage temperature
*1 Characteristics of built-in transistor
*2 Each terminal mounted on a reference land
Symbol
VCC
VIN
IC(max)
IO
PD
Tj
Tstg
Limits(DTA014E)
M EB
UB
-50
-40
10
-100
-50
150 200
150
-55 to +150
Unit
V
V
V
mA
mA
mW
C
C
www.rohm.com
©2011 ROHM Co., Ltd. All rights reserved.
1/2
2011.08 - Rev.A
Datasheet pdf - http://www.DataSheet4U.net/

1 Page





DTA014EEB pdf, ピン配列
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.www.DataSheet.co.kr
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2011 ROHM Co., Ltd. All rights reserved.
R1120A
Datasheet pdf - http://www.DataSheet4U.net/


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ DTA014EEB データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
DTA014EEB

100mA/-50V Digital transistors

ROHM Semiconductor
ROHM Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap