No Preview Available !
www.DataSheet.co.kr
19-5708; Rev 0; 12/10
Ultra-Low Power Op Amp in
a Tiny 6-Bump WLP
General Description
The MAX44264 is an ultra-small (6-bump WLP) op amp
that draws only 750nA of supply current. It operates
from a single +1.8V to +5.5V supply and features
ground-sensing inputs and rail-to-rail output. The ultra-
low supply current, low-operating voltage, and rail-to-
rail output capabilities make these operational
amplifiers ideal for use in single lithium ion (Li+), or two-
cell NiCd or alkaline battery systems. The rail-to-rail out-
put stage of the MAX44264 is capable of driving the
output voltage to within 4mV of the rail with a 100kΩ
load, and can sink and source 11mA with a +5V sup-
ply. The IC is unity-gain stable and available in a
space-saving 0.9mm x 1.3mm, 6-bump WLP package.
Applications
Cell Phones
Tablet/Notebook Computers
Mobile Accessories
Battery-Powered Devices
Features
♦ Ultra-Low 750nA Supply Current per Amplifier
♦ Ultra-Low +1.8V Supply Voltage Operation
♦ Ground-Sensing Input Common-Mode Range
♦ Outputs Swing Rail-to-Rail
♦ Outputs Source and Sink 11mA of Load Current
♦ No Phase Reversal for Overdriven Inputs
♦ High 120dB Open-Loop Voltage Gain
♦ Low 500µV Input Offset Voltage
♦ 9kHz Gain-Bandwidth Product
♦ 250pF (min) Capacitive Load Capability
♦ Available in a Tiny, 0.9mm x 1.3mm, 6-Bump WLP
Package
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
MAX44264EWT+ -40°C to +85°C
6 WLP
+Denotes a lead(Pb)-free/RoHS-compliant package.
TOP
MARK
+CB
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
Datasheet pdf - http://www.DataSheet4U.net/
www.DataSheet.co.kr
Single/Dual/Quad, +1.8V/750nA, SC70,
Rail-to-Rail Op Amps
Typical Operating Characteristics (continued)
(VDD = +5V, VSS = 0V, VCM = 0V, RL = 100kΩ to VDD/2, TA = +25°C, unless otherwise noted.)
COMMON-MODE REJECTION RATIO vs.
TEMPERATURE
-20
-30
-40
-50
-60
-70
-80
-90
-100
-110
-120
-50 -25
0
25 50 75 100
TEMPERATURE (°C)
80
70
60
50
40
30
20
10
0
-10
-20
-30
-40
-50
-60
1
GAIN AND PHASE vs. FREQUENCY
180MAX44264 toc13
CL = 12pF
RL = 1MΩ 135
AVCL = 1000V/V
GAIN 90
45
0
PHASE
10 100 1k 10k
FREQUENCY (Hz)
-45
-90
-135
100k
MINIMUM SUPPLY VOLTAGE
vs. TEMPERATURE
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
-50 -25 0 25 50 75 100
TEMPERATURE (°C)
GAIN AND PHASE vs. FREQUENCY
80 180MAX44264 toc14
70
60 135
50 GAIN
40 90
30
20 45
10
00
-10
-20 PHASE
-30
-40
-50
RL = 1MΩ
AVCL = 1000V/V
CL = 250pF
-60
1 10 100 1k
-45
-90
-135
10k 100k
AVOL vs. OUTPUT VOLTAGE SWING
140
130 RL = 1MΩ
120 RL = 100kΩ
110
100 RL = 10kΩ
90
80
70
60
2.5
3.0 3.5 4.0 4.5
OUTPUT VOLTAGE (Vp-p)
5.0
TOTAL HARMONIC DISTORTION
PLUS NOISE vs. FREQUENCY
10.00
1.00
0.10
0.01
10
100 1k
FREQUENCY (Hz)
10k
VOLTAGE NOISE DENSITY vs.
FREQUENCY
10k
STABILITY vs. CAPACITIVE
AND RESISTIVE LOADS
100k
1k 10k
UNSTABLE
REGION
100 1k
10
10
100 1k
10k
FREQUENCY (Hz)
100k
100
10k
100k
RESISTIVE LOAD (Ω)
1M
40
36
32
28
24
20
16
12
8
4
0
0
IOUT vs. VOUT
ISINK
ISOURCE
1234
VOUT (V)
5
_______________________________________________________________________________________ 5
Datasheet pdf - http://www.DataSheet4U.net/