DataSheet.es    


PDF ISLA224S Data sheet ( Hoja de datos )

Número de pieza ISLA224S
Descripción 250/200/125 MSPS JESD204B High Speed Serial Output ADC
Fabricantes Intersil 
Logotipo Intersil Logotipo



Hay una vista previa y un enlace de descarga de ISLA224S (archivo pdf) en la parte inferior de esta página.


Total 38 Páginas

No Preview Available ! ISLA224S Hoja de datos, Descripción, Manual

www.DataSheet.co.kr
Dual 14-Bit, 250/200/125 MSPS JESD204B High Speed
Serial Output ADC
ISLA224S
The ISLA224S is a series of low-power, high-performance,
dual-channel 14-bit, analog-to-digital converters. Designed
with FemtoCharge™ technology on a standard CMOS process,
the series supports sampling rates of up to 250MSPS. The
ISLA224S is part of a pin-compatible family of 12- and 14-bit
dual-channel A/Ds with maximum sample rates ranging from
125MSPS to 250MSPS and shares the same analog core as
Intersil's proven ISLA224P series of ADCs. The family
minimizes power consumption while providing state-of-the art
dynamic performance, offering an optimal performance-vs-
power trade-off.
Differentiating the ISLA224S from the ISLA224P is its highly
configurable, JESD204B-compliant, high speed serial output
link. The link offers data rates up to 4.375Gbps per lane and
multiple packing modes. It can be configured to use two or
three lanes to transmit the conversion data, allowing for
flexibility in the receiver design. The SERDES transmitter also
provides deterministic latency and multi-chip time alignment
support to satisfy an application's complex synchronization
requirements.
A serial peripheral interface (SPI) port allows for extensive
configurability of the JESD204B transmitter including access
to its built-in link and transport-layer test patterns. The SPI port
also provides control for numerous additional features
including the fine gain and offset adjustments of the two ADC
cores as well as the programmable clock divider, enabling 2x
and 4x harmonic clocking.
The ISLA224S is available in a space-saving 7mmx7mm 48 Ld
QFN package. The package features a thermal pad for
improved thermal performance and is specified over the full
industrial temperature range (-40°C to +85°C).
Features
• JESD204A/B High Speed Data Interface
- JESD204A Compliant
- JESD204B Device Subclass 0 Compliant
- JESD204B Device Subclass 2 Compatible
- Up to 3 JESD204 Output Lanes Running up to 4.375Gbps
- Highly Configurable JESD204 Transmitter
• Multiple Chip Time Alignment and Deterministic Latency
Support (JESD204B Device Subclass 2)
• SPI Programmable Debugging Features and Test Patterns
• 48-pin QFN 7mmx7mm Package
Key Specifications
• SNR @ 250/200/125MSPS
73.2/74.1/75.1 dBFS fIN = 30MHz
70.7/70.7/70.6 dBFS fIN = 363MHz
• SFDR @ 250/200/125MSPS
82/91/94 dBc fIN = 30MHz
77/79/67 dBc fIN = 363MHz
• Total Power Consumption: 989mW @ 250MSPS
Applications
• Radar and Satellite Antenna Array Processing
• Broadband Communications and Microwave Receivers
• High-Performance Data Acquisition
• Communications Test Equipment
• High-Speed Medical Imaging
FIGURE 1. SERDES DATA EYE AT 4.375Gbps
Pin-Compatible Family
MODEL
ISLA224S25
ISLA224S20
ISLA224S17
ISLA224S12
ISLA222S25
ISLA222S20
ISLA222S12
RESOLUTION
14
14
14
14
12
12
12
SPEED
(MSPS)
250
200
170
125
250
200
125
PRODUCT
AVAILABILITY
Now
Now
Soon
Soon
Soon
Soon
Soon
December 20, 2011
FN7911.0
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) and FemtoCharge are trademarks owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
Datasheet pdf - http://www.DataSheet4U.net/

1 page




ISLA224S pdf
www.DataSheet.co.kr
ISLA224S
Absolute Maximum Ratings
Thermal Information
AVDD to AVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.4V to 2.1V
OVDD to OVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.4V to 2.1V
AVSS to OVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to 0.3V
Analog Inputs to AVSS . . . . . . . . . . . . . . . . . . . . . . . . . -0.4V to AVDD + 0.3V
Clock Inputs to AVSS . . . . . . . . . . . . . . . . . . . . . . . . . . -0.4V to AVDD + 0.3V
Logic Input to AVSS . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.4V to OVDD + 0.3V
Logic Inputs to OVSS . . . . . . . . . . . . . . . . . . . . . . . . . . -0.4V to OVDD + 0.3V
Latchup (Tested per JESD-78C;Class 2,Level A) . . . . . . . . . . . . . . . . 100mA
Thermal Resistance (Typical)
θJA (°C/W) θJC (°C/W)
48 Ld QFN (Notes 3, 4, 5) . . . . . . . . . . . . . .
24
0.4
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+150°C
Pb-Free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C
NOTES:
3. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379.
4. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
5. For solder stencil layout and reflow guidelines, please see Tech Brief TB389.
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
Electrical Specifications All specifications apply under the following conditions unless otherwise noted: AVDD = 1.8V, OVDD = 1.8V,
TA = -40°C to +85°C (typical specifications at +25°C), AIN = -2dBFS, fSAMPLE = Maximum Conversion Rate (per speed grade). Boldface limits apply
over the operating temperature range, -40°C to +85°C.
ISLA224S25
ISLA224S20
ISLA224S12
PARAMETER
SYMBOL
CONDITIONS
MIN MAX MIN MAX MIN MAX
(Note 6) TYP (Note 6) (Note 6) TYP (Note 6) (Note 6) TYP (Note 6) UNITS
DC SPECIFICATIONS
Analog Input
Full-Scale Analog Input
Range
VFS Differential
1.95 2.00 2.15 1.95 2.0 2.15
2.0
VP-P
Input Resistance
Input Capacitance
Full Scale Range Temp.
Drift
RIN
CIN
AVTC
Differential
Differential
Full Temp
600 600 600 Ω
7.4 7.4 7.4 pF
115 58
58 ppm/°C
Input Offset Voltage
Gain Error
Common-Mode Output
Voltage
VOS
EG
VCM
-5.0 ±1 5.0
1
0.94
-5.0 ±1 5.0
1
0.94
±1
1
0.94
mV
%
V
Common Mode Input
Current (per pin)
ICM
6.0 6.0 6.0 µA/MSPS
Clock Inputs
Inputs Common Mode
Voltage
0.9 0.9 0.9 V
CLKP, CLKN Swing
1.8 1.8 1.8 V
Power Requirements
1.8V Analog Supply
Voltage
AVDD
1.7 1.8 1.9
1.7 1.8 1.9
1.8
V
1.8V Digital Supply
Voltage
OVDD
1.7 1.8 1.9
1.7 1.8 1.9
1.8
V
1.8V Analog Supply
Current
IAVDD
353 375
324 344
282
mA
1.8V Digital Supply
Current
IOVDD Minimum number of
lanes active
195 213
179 196
123
mA
5 FN7911.0
December 20, 2011
Datasheet pdf - http://www.DataSheet4U.net/

5 Page





ISLA224S arduino
www.DataSheet.co.kr
ISLA224S
Typical Performance Curves
All Typical Performance Characteristics apply under the following conditions unless otherwise noted: AVDD = OVDD = 1.8V, TA = +25°C,
AIN = -2dBFS, fIN = 105MHz, fSAMPLE = 250MSPS. (Continued)
4 90
3
85
2 SFDR
80
1
0 75
-1
-2
-3
-4
0
5000
10000
CODE
FIGURE 11. INTEGRAL NONLINEARITY
15000
70 SNR
65
60
700
800 900 1000 1100 1200 1300
Vcm (mV)
FIGURE 12. SNR AND SFDR vs VCM
1400
1500
14000
12000
10000
11181
9571
8000
6000
4000
2765
4650
2000
514
0 1 43
1118 146 11 0
0 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210
ADC CODE
FIGURE 13. NOISE HISTOGRAM
0
AIN = -2.0 dBFS
SNR = 72.8 dBFS
-20 SFDR = 83 dBc
SINAD = 72.2 dBFS
-40
-60
-80
-100
-120
0
20 40 60 80 100
FREQUENCY (MHz)
FIGURE 14. SINGLE-TONE SPECTRUM @ 105MHz
120
0
AIN = -2.0 dBFS
SNR = 71.9 dBFS
-20 SFDR = 80 dBc
SINAD = 71.1 dBFS
-40
-60
-80
-100
-120
0
20 40 60 80 100
FREQUENCY (MHz)
FIGURE 15. SINGLE-TONE SPECTRUM @ 190MHz
120
11
0
AIN = -2.0 dBFS
SNR = 70.5 dBFS
-20 SFDR = 74 dBc
SINAD = 68.8 dBFS
-40
-60
-80
-100
-120 0
20 40 60 80 100
FREQUENCY (MHz)
FIGURE 16. SINGLE-TONE SPECTRUM @ 363MHz
120
FN7911.0
December 20, 2011
Datasheet pdf - http://www.DataSheet4U.net/

11 Page







PáginasTotal 38 Páginas
PDF Descargar[ Datasheet ISLA224S.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
ISLA224P250MSPS/200MSPS/130MSPS ADCIntersil
Intersil
ISLA224S250/200/125 MSPS JESD204B High Speed Serial Output ADCIntersil
Intersil

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar