DataSheet.jp

K20P144M100SF2 の電気的特性と機能

K20P144M100SF2のメーカーはFreescale Semiconductorです、この部品の機能は「K20 Sub-Family」です。


製品の詳細 ( Datasheet PDF )

部品番号 K20P144M100SF2
部品説明 K20 Sub-Family
メーカ Freescale Semiconductor
ロゴ Freescale Semiconductor ロゴ 




このページの下部にプレビューとK20P144M100SF2ダウンロード(pdfファイル)リンクがあります。
Total 30 pages

No Preview Available !

K20P144M100SF2 Datasheet, K20P144M100SF2 PDF,ピン配置, 機能
www.DataSheet.co.kr
Freescale Semiconductor
Data Sheet: Technical Data
K20 Sub-Family Data Sheet
Supports the following:
MK20DX128ZVLQ10,
MK20DX128ZVMD10,
MK20DX256ZVLQ10,
MK20DX256ZVMD10,
MK20DN512ZVLQ10,
MK20DN512ZVMD10
Features
Operating Characteristics
– Voltage range: 1.71 to 3.6 V
– Flash write voltage range: 1.71 to 3.6 V
– Temperature range (ambient): -40 to 105°C
Performance
– Up to 100 MHz ARM Cortex-M4 core with DSP
instructions delivering 1.25 Dhrystone MIPS per
MHz
Memories and memory interfaces
– Up to 512 KB program flash memory on non-
FlexMemory devices
– Up to 128 KB RAM
– Serial programming interface (EzPort)
– FlexBus external bus interface
Clocks
– 3 to 32 MHz crystal oscillator
– 32 kHz crystal oscillator
– Multi-purpose clock generator
System peripherals
– 10 low-power modes to provide power optimization
based on application requirements
– Memory protection unit with multi-master
protection
– 16-channel DMA controller, supporting up to 64
request sources
– External watchdog monitor
– Software watchdog
– Low-leakage wakeup unit
Document Number: K20P144M100SF2
Rev. 6, 9/2011
K20P144M100SF2
Security and integrity modules
– Hardware CRC module to support fast cyclic
redundancy checks
– 128-bit unique identification (ID) number per chip
Human-machine interface
– Low-power hardware touch sensor interface (TSI)
– General-purpose input/output
Analog modules
– Two 16-bit SAR ADCs
– Programmable gain amplifier (PGA) (up to x64)
integrated into each ADC
– Two 12-bit DACs
– Three analog comparators (CMP) containing a 6-bit
DAC and programmable reference input
– Voltage reference
Timers
– Programmable delay block
– Eight-channel motor control/general purpose/PWM
timer
– Two 2-channel quadrature decoder/general purpose
timers
– Periodic interrupt timers
– 16-bit low-power timer
– Carrier modulator transmitter
– Real-time clock
Freescale reserves the right to change the detail specifications as may be
required to permit improvements in the design of its products.
© 2010–2011 Freescale Semiconductor, Inc.
Datasheet pdf - http://www.DataSheet4U.net/

1 Page





K20P144M100SF2 pdf, ピン配列
www.DataSheet.co.kr
Table of Contents
1 Ordering parts...........................................................................5
1.1 Determining valid orderable parts......................................5
2 Part identification......................................................................5
2.1 Description.........................................................................5
2.2 Format...............................................................................5
2.3 Fields.................................................................................5
2.4 Example............................................................................6
3 Terminology and guidelines......................................................6
3.1 Definition: Operating requirement......................................6
3.2 Definition: Operating behavior...........................................7
3.3 Definition: Attribute............................................................7
3.4 Definition: Rating...............................................................8
3.5 Result of exceeding a rating..............................................8
3.6 Relationship between ratings and operating
requirements......................................................................8
3.7 Guidelines for ratings and operating requirements............9
3.8 Definition: Typical value.....................................................9
3.9 Typical value conditions....................................................10
4 Ratings......................................................................................10
4.1 Thermal handling ratings...................................................11
4.2 Moisture handling ratings..................................................11
4.3 ESD handling ratings.........................................................11
4.4 Voltage and current operating ratings...............................11
5 General.....................................................................................12
5.1 AC electrical characteristics..............................................12
5.2 Nonswitching electrical specifications...............................12
5.2.1 Voltage and current operating requirements......13
5.2.2 LVD and POR operating requirements...............14
5.2.3 Voltage and current operating behaviors............14
5.2.4 Power mode transition operating behaviors.......15
5.2.5 Power consumption operating behaviors............16
5.2.6 EMC radiated emissions operating behaviors....19
5.2.7 Designing with radiated emissions in mind.........20
5.2.8 Capacitance attributes........................................20
5.3 Switching specifications.....................................................20
5.3.1 Device clock specifications.................................20
5.3.2 General switching specifications.........................20
5.4 Thermal specifications.......................................................21
5.4.1 Thermal operating requirements.........................21
5.4.2 Thermal attributes...............................................22
6 Peripheral operating requirements and behaviors....................23
6.1 Core modules....................................................................23
6.1.1 Debug trace timing specifications.......................23
6.1.2 JTAG electricals..................................................24
6.2 System modules................................................................27
6.3 Clock modules...................................................................27
6.3.1 MCG specifications.............................................27
6.3.2 Oscillator electrical specifications.......................29
6.3.3 32kHz Oscillator Electrical Characteristics.........31
6.4 Memories and memory interfaces.....................................32
6.4.1 Flash (FTFL) electrical specifications.................32
6.4.2 EzPort Switching Specifications.........................34
6.4.3 Flexbus Switching Specifications........................35
6.5 Security and integrity modules..........................................38
6.6 Analog...............................................................................38
6.6.1 ADC electrical specifications..............................38
6.6.2 CMP and 6-bit DAC electrical specifications......46
6.6.3 12-bit DAC electrical characteristics...................49
6.6.4 Voltage reference electrical specifications..........52
6.7 Timers................................................................................53
6.8 Communication interfaces.................................................53
6.8.1 USB electrical specifications...............................53
6.8.2 USB DCD electrical specifications......................54
6.8.3 USB VREG electrical specifications...................54
6.8.4 CAN switching specifications..............................55
6.8.5 DSPI switching specifications (limited voltage
range).................................................................55
6.8.6 DSPI switching specifications (full voltage
range).................................................................56
6.8.7 I2C switching specifications................................58
6.8.8 UART switching specifications............................58
6.8.9 SDHC specifications...........................................58
6.8.10 I2S switching specifications................................59
6.9 Human-machine interfaces (HMI)......................................61
6.9.1 TSI electrical specifications................................61
7 Dimensions...............................................................................62
7.1 Obtaining package dimensions.........................................62
8 Pinout........................................................................................63
K20 Sub-Family Data Sheet Data Sheet, Rev. 6, 9/2011.
Freescale Semiconductor, Inc.
3
Datasheet pdf - http://www.DataSheet4U.net/


3Pages


K20P144M100SF2 電子部品, 半導体
www.DataSheet.co.kr
Terminology and guidelines
Field
FFF
Description
Program flash memory size
R Silicon revision
T Temperature range (°C)
PP Package identifier
CC Maximum CPU frequency (MHz)
N Packaging type
2.4 Example
This is an example part number:
MK20DN512ZVMD10
3 Terminology and guidelines
Values
• 32 = 32 KB
• 64 = 64 KB
• 128 = 128 KB
• 256 = 256 KB
• 512 = 512 KB
• 1M0 = 1 MB
• Z = Initial
• (Blank) = Main
• A = Revision after main
• V = –40 to 105
• C = –40 to 85
• FM = 32 QFN (5 mm x 5 mm)
• FT = 48 QFN (7 mm x 7 mm)
• LF = 48 LQFP (7 mm x 7 mm)
• EX = 64 LQFN (9 mm x 9 mm)
• LH = 64 LQFP (10 mm x 10 mm)
• LK = 80 LQFP (12 mm x 12 mm)
• MB = 81 MAPBGA (8 mm x 8 mm)
• LL = 100 LQFP (14 mm x 14 mm)
• MC = 121 MAPBGA (8 mm x 8 mm)
• LQ = 144 LQFP (20 mm x 20 mm)
• MD = 144 MAPBGA (13 mm x 13 mm)
• MF = 196 MAPBGA (15 mm x 15 mm)
• MJ = 256 MAPBGA (17 mm x 17 mm)
• 5 = 50 MHz
• 7 = 72 MHz
• 10 = 100 MHz
• 12 = 120 MHz
• 15 = 150 MHz
• R = Tape and reel
• (Blank) = Trays
K20 Sub-Family Data Sheet Data Sheet, Rev. 6, 9/2011.
6 Freescale Semiconductor, Inc.
Datasheet pdf - http://www.DataSheet4U.net/

6 Page



ページ 合計 : 30 ページ
 
PDF
ダウンロード
[ K20P144M100SF2 データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
K20P144M100SF2

K20 Sub-Family

Freescale Semiconductor
Freescale Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap