|
|
Número de pieza | FD1000A | |
Descripción | 4-COM 51-SEG LCD Display Driver | |
Fabricantes | Finechips | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de FD1000A (archivo pdf) en la parte inferior de esta página. Total 20 Páginas | ||
No Preview Available ! www.DataSheet.co.kr
FD1000A
3/4COM LCD Driver
FD1000A
3-COM 52-SEG, 4-COM 51-SEG LCD Display Driver
CONTENTS
January. 2008
Ver. 1.0
1. General Description & Features -------------------------------- page 2
2. Pin Assignment & Block Diagram -------------------------------- page 3
3. Pin Descriptions
-------------------------------- page 4
4. Serial Data Format and Timing -------------------------------- page 4
5. Control Data Functions
-------------------------------- page 5
6. Display Data to Segment Output Pin Correspondence -------- page 7
7. LCD Driving Waveform
-------------------------------- page 9
8. Application Circuit
-------------------------------- page 11
9. INH\ Pin and Display Control
-------------------------------- page 17
10. Absolute Maximum Ratings
-------------------------------- page 18
11. D.C Electrical Characteristics
-------------------------------- page 18
12. A.C Electrical Characteristics
-------------------------------- page 19
13. Package Dimensions
-------------------------------- page 20
1 / 20
Datasheet pdf - http://www.DataSheet4U.net/
1 page www.DataSheet.co.kr
FD1000A
z 1/4 Duty , SCK is stopped at low level
3/4COM LCD Driver
z 1/4 Duty , SCK is stopped at high level
Control Data Functions
z Display Data : D1 to D156 (1/3 Duty), D1 to D204 (1/4 Duty)
When the bit of a display data is “1”, the LCD display is turn ON
When the bit value is “0”, the display is turn OFF.
z Duty Selection : Duty select address is which sets LCD driving duty ratio 1/3 or 1/4 duty.
Address = 41 Hex, 1/3 Duty ( 3-Common 52-Segment LCD Driver )
Address = 80 Hex, 1/4 Duty ( 4-Common 51-Segment LCD Driver )
z DR : 1/2 or 1/3 Bias Selection Bit
DR data = “0” , 1/2 Bias Drive
= “1” , 1/3 Bias Drive
z SC : Segment ON/OFF Control Bit
SC data = “0” , Display ON
= “1” , Display OFF
z BU : Power saving Control Bit
BU data = “0” , Normal Mode
= “1” , Power-saving Mode.
In this mode the Oscillator is stopped and the segment pins output Vss levels.
z CU : LCD dividing resistors selection bit (Only 1/4 Duty Mode)
CU data = “0” , Normal Mode (RLCD=R)
= “1” , Low current Mode (RLCD=2*R)
5 / 20
Datasheet pdf - http://www.DataSheet4U.net/
5 Page www.DataSheet.co.kr
FD1000A
Application Circuit (1)
3/4COM LCD Driver
11 / 20
Datasheet pdf - http://www.DataSheet4U.net/
11 Page |
Páginas | Total 20 Páginas | |
PDF Descargar | [ Datasheet FD1000A.PDF ] |
Número de pieza | Descripción | Fabricantes |
FD1000A | 4-COM 51-SEG LCD Display Driver | Finechips |
FD1000FH-56 | HIGH POWER/ HIGH FREQUENCY/ PRESS PACK TYPE | Mitsubishi Electric Semiconductor |
FD1000FV-90 | HIGH POWER/ HIGH FREQUENCY/ PRESS PACK TYPE | Mitsubishi Electric Semiconductor |
FD1000FX-90 | HIGH POWER/ HIGH FREQUENCY/ PRESS PACK TYPE | Mitsubishi Electric Semiconductor |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |