|
|
Número de pieza | G104X1-L01 | |
Descripción | TFT LCD Module | |
Fabricantes | Chi Mei | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de G104X1-L01 (archivo pdf) en la parte inferior de esta página. Total 26 Páginas | ||
No Preview Available ! www.DataSheet.co.kr
Issued Date: Aug. 26, 2008
Model No.: G104X1-L01
Appr oval
TFT LCD Approval Specification
MODEL NO.: G104X1 - L01
Customer:
Approved by:
Note:
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA 92656
Http://www.AZDISPLAYS.com
2008-10-06
10:53:31 CST
PMMD
Director
cs_lee(
/17564/44926)
Director Accept
1
Version2.2
Datasheet pdf - http://www.DataSheet4U.net/
1 page www.DataSheet.co.kr
Issued Date: Aug. 26, 2008
Model No.: G104X1-L01
Approval
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal (H)
Module Size Vertical (V)
Depth (D)
Weight
Min.
225
175.8
9.67
-
Typ.
225.5
176.3
10.17
480
Max.
226
176.8
10.67
-
Unit Note
mm
mm
(1)
mm -
g-
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Test Item
High Temperature Storage Test
Low Temperature Storage Test
Thermal Shock Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Shock (Non-Operating)
Vibration (Non-Operating)
Test Condition
80ºC, 240 hours
-20ºC, 240 hours
-20ºC, 0.5hour 70 , 0.5hour; 100cycles, 1hour/cycle
70ºC, 240 hours
-20ºC, 240 hours
60ºC, 90%RH, 240hours
200G, 2ms, half sine wave, 1 time for ± X, ± Y, ± Z.
1.5G, 10 ~ 300 Hz, 10min/cycle, 3 cycles each X, Y, Z
Note
(1) (2)
(3)
(3)
Note (1) There should be no condensation on the surface of panel during test.
Note (2) Temperature of panel display surface area should be 80 ºC Max.
Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough so that
the module would not be twisted or bent by the fixture.
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
Item
Power Supply Voltage
Input Signal Voltage
Symbol
Vcc
VIN
Value
Min. Max.
-0.3 4.0
-0.3 3.6
Unit
V
V
Note
(1)
Note (1) Permanent damage to the device may occur if maximum values are exceeded. Functional operation
should be restricted to the conditions described under normal operating conditions.
5
Version2.2
Datasheet pdf - http://www.DataSheet4U.net/
5 Page www.DataSheet.co.kr
Issued Date: Aug. 26, 2008
Model No.: G104X1-L01
Approval
Note (1) The system must have the transmitter to drive the assembly.
Note (2) LVDS cable impedance shall be 50 ohms per signal line or about 100 ohms per twist-pair line when it is
used differentially.
5.3 BACKLIGHT UNIT
Pin
Symbol
Description
1 LV Ground
2 HV1 High Voltage
3 HV2 High Voltage
Note (1): Connector Part No: BHR-03VS-1 (JST Mfg. Co., Ltd)
Remark
White
Pink
Pink
11
Version2.2
Datasheet pdf - http://www.DataSheet4U.net/
11 Page |
Páginas | Total 26 Páginas | |
PDF Descargar | [ Datasheet G104X1-L01.PDF ] |
Número de pieza | Descripción | Fabricantes |
G104X1-L01 | TFT LCD Module | Chi Mei |
G104X1-L01-V453A | TFT LCD module | Display Technology |
G104X1-L01-V453B | TFT LCD module | Display Technology |
G104X1-L02 | TFT LCD Module | Chi Mei |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |