DataSheet.jp

UNR32AA の電気的特性と機能

UNR32AAのメーカーはPanasonic Semiconductorです、この部品の機能は「Silicon NPN epitaxial planar type」です。


製品の詳細 ( Datasheet PDF )

部品番号 UNR32AA
部品説明 Silicon NPN epitaxial planar type
メーカ Panasonic Semiconductor
ロゴ Panasonic Semiconductor ロゴ 




このページの下部にプレビューとUNR32AAダウンロード(pdfファイル)リンクがあります。

Total 3 pages

No Preview Available !

UNR32AA Datasheet, UNR32AA PDF,ピン配置, 機能
www.DataSheet4U.net
Transistors with built-in Resistor
UNR32AA
Silicon NPN epitaxial planar transistor
For digital circuits
Features
Suitable for high-density mounting and downsizing of the equipment
Contribute to low power consumption
Absolute Maximum Ratings Ta = 25°C
Parameter
Symbol Rating
Collector-base voltage (Emitter open)
Collector-emitter voltage (Base open)
Collector current
Total power dissipation
Junction temperature
Storage temperature
VCBO
VCEO
IC
PT
Tj
Tstg
50
50
80
100
125
55 to +125
Unit
V
V
mA
mW
°C
°C
0.33+–00..0025
3
0.23+–00..0025
12
(0.40) (0.40)
0.80±0.05
1.20±0.05
5°
Unit: mm
0.10+–00..0025
1: Base
2: Emitter
3: Collector
SSSMini3-F1 Package
Marking Symbol: HL
Internal Connection
R1 (100 kΩ)
B
R2
(100 kΩ)
C
E
Electrical Characteristics Ta = 25°C ± 3°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Collector-base voltage (Emitter open) VCBO IC = 10 µA, IE = 0 50 V
Collector-emitter voltage (Base open) VCEO IC = 2 mA, IB = 0
50 V
Collector-base cutoff current (Emitter open) ICBO VCB = 50 V, IE = 0
0.1 µA
Collector-emitter cutoff current (Base open) ICEO VCE = 50 V, IB = 0
0.5 µA
Emitter-base cutoff current (Collector open) IEBO VEB = 6 V, IC = 0
0.1 mA
Forward current transfer ratio
hFE VCE = 10 V, IC = 5 mA
80
Collector-emitter saturation voltage
VCE(sat) IC = 10 mA, IB = 0.3 mA
0.25 V
Output voltage high level
VOH VCC = 5 V, VB = 0.5 V, RL = 1 k
4.9
V
Output voltage low level
VOL VCC = 5 V, VB = 5 V, RL = 1 k
0.2 V
Input resistance
R1
30% 100 +30% k
Resistance ratio
R1 / R2
0.75 1.0 1.25
Transition frequency
fT VCB = 10 V, IE = −2 mA, f = 200 MHz
150
MHz
Note) Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
Publication date: November 2002
SJH00079AED
1

1 Page





UNR32AA pdf, ピン配列
www.DataSheet4U.net
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government
if any of the products or technologies described in this material and controlled under the "Foreign
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteris-
tics and applied circuits examples of the products. It neither warrants non-infringement of intellec-
tual property right or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the
product or technologies as described in this material.
(4) The products described in this material are intended to be used for standard applications or general
electronic equipment (such as office equipment, communications equipment, measuring instru-
ments and household appliances).
Consult our sales staff in advance for information on the following applications:
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without
notice for modification and/or improvement. At the final stage of your design, purchasing, or use of
the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that
the latest specifications satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage, and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of
incidence of break down and failure mode, possible to occur to semiconductor products. Measures
on the systems such as redundant design, arresting the spread of fire or preventing glitch are
recommended in order to prevent physical injury, fire, social damages, for example, by using the
products.
(7) When using products for which damp-proof packing is required, observe the conditions (including
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets
are individually exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL


3Pages





ページ 合計 : 3 ページ
 
PDF
ダウンロード
[ UNR32AA データシート.PDF ]


データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。


共有リンク

Link :


部品番号部品説明メーカ
UNR32A0

Silicon NPN epitaxial planar type

Panasonic Semiconductor
Panasonic Semiconductor
UNR32A1

Silicon NPN epitaxial planar type

Panasonic Semiconductor
Panasonic Semiconductor
UNR32A1

Silicon NPN epitaxial planar type

Panasonic Semiconductor
Panasonic Semiconductor
UNR32A3

Silicon NPN epitaxial planar type

Panasonic Semiconductor
Panasonic Semiconductor


www.DataSheet.jp    |   2020   |  メール    |   最新    |   Sitemap