G150XG03_V2 Datasheet PDF - AUO
| Part Number | G150XG03_V2 | |
| Description | LCD Module | |
| Manufacturers | AUO | |
| Logo |  |
|
|
There is a preview and G150XG03_V2 download ( pdf file ) link at the bottom of this page. Total 29 Pages | ||
Preview 1 page No Preview Available !
www.DataSheet4U.net
Produktspezifikation für AUO G150XG03 V2
Im Programm von
Achtung:
Dieses Dokument unterliegt nicht dem Änderungsdienst. Der Stand
entspricht der Drucklegung. Bitte informieren Sie sich vor Verwendung
ob die technischen Daten noch dem aktuellen Stand entsprechen. Trotz
sorgfältiger Kontrolle können wir leider keine Haftung für Druckfehler
oder Irrtümer übernehmen.
|
| |
 
www.DataSheet4U.net
G150XG03 V2
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit
(IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
15) Severe temperature condition may result in different luminance, response time and lamp
ignition voltage.
16) Continuous operating TFT-LCD display under low temperature environment may accelerate
lamp exhaustion and reduce luminance dramatically.
17) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
18) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
G150XG03 V2 rev. 0.0
4/28
Preview 5 Page |
Part DetailsOn this page, you can learn information such as the schematic, equivalent, pinout, replacement, circuit, and manual for G150XG03_V2 electronic component. |
| Information | Total 29 Pages | |
| Link URL | [ Copy URL to Clipboard ] | |
| Download | [ G150XG03_V2.PDF Datasheet ] | |
Share Link :
Electronic Components Distributor
|
An electronic components distributor is a company that sources, stocks, and sells electronic components to manufacturers, engineers, and hobbyists. |
| SparkFun Electronics | Allied Electronics | DigiKey Electronics | Arrow Electronics |
| Mouser Electronics | Adafruit | Newark | Chip One Stop |
Featured Datasheets
| Part Number | Description | MFRS |
| G150XG03-V0 | The function is LCD Module. AUO | |
| G150XG03-V1 | The function is LCD Module. AUO | |
| G150XG03-V2 | The function is LCD Module. AUO | |
Semiconductors commonly used in industry:
1N4148 |
BAW56 |
1N5400 |
NE555 | | ||
Quick jump to:
G150
1N4
2N2
2SA
2SC
74H
BC
HCF
IRF
KA | ||