|
|
|
|
LTA104D182FのメーカーはToshibaです、この部品の機能は「LCD Module」です。 このページではLTA104D182Fの詳細な仕様と技術情報(パラメータ、電気的特性、ピン配置など)を見つけることができます. |
LTA104D182F の電気的特性と機能
| 部品番号 | LTA104D182F |
| |
| 部品説明 | LCD Module | ||
| メーカ | Toshiba | ||
| ロゴ |  |
||
このページの下部にプレビューとLTA104D182Fダウンロード（pdfファイル）リンクがあります。 Total 11 pages
Toshiba Matsushita Display Technology Co., Ltd
PRODUCT INFORMATION
26cm COLOR TFT-LCD MODULE
(10.4 TYPE)
LTA104D182F
(p-Si TFT)
All information is subject to change without notice. Please read bottom notes.
FEATURES
(1) 10.4 SVGA color display with High Luminance
(2) Built in Long Life Lamps(MTTF:50,000 h)
( Condition/ Ta:25°C, IFL:6.0mA(rms)(continuing lighting), fFL:40kHz )
(3) Replaceable structure of lamp units
TENTATIVE
RoHS compatible
MECHANICAL SPECIFICATIONS
Item
Dimensional Outline (typ.)
Number of Pixels
Active Area
Pixel Pitch
Weight (approximately)
Backlight
Specifications
242.0 (W) x 178.45 (H) x 13.2
800 (W) x 600 (H) pixels
211.2 (W) x 158.4 (H) mm
0.264 (W) x 0.264 (H)
580 g
Sidelight (2 CCFLs)
(D) mm
ABSOLUTE MAXIMUM RATINGS
Item Min. Max.
Supply Voltage
(VDD)
-0.3
4.0
(VFL)
0
2.0
FL Driving Frequency
(fFL) ---
100
Input Signal Voltage
Operating Temperature *1
(VIN)
-0.3
-20
VDD+0.3
70
Storage Temperature
-30 80
Storage Humidity
(Max. wet bulb temperature = 39°C)
10
90
*1: Wet bulb temperature should be 39°C Max., and no condensation of water.
Unit
V
kV(rms)
KHz
V
°C
°C
%(RH)
ELECTRICAL SPECIFICATION (Ta=25°C) (RECOMMENDED OPERATION CONDITION)
Item
Min.
Typ.
Max.
Unit
Remarks
Supply Voltage
(VDD)
3.0
3.3
3.6
V
FL Start Voltage
(VFL)
---
470
--- V(rms)
(VSFL)
1200
---
1900
V(rms) Ta=0°C
Differential Input Voltage
(VID)
100
---
600 mV
Common Mode Input Voltage
Current Consumption
Power Consumption*1 *2
(VCM)
(IDD) *3
(IFL) *4
1.0
---
3.0
---
---
2.4-(VID)/2
V
205 --- mA
6.0 6.5 mA(rms)
6.3 --- W
*2: The surface temperature caused by self heat radiation of cell itself is specified on this item
*3: 8 color bars pattern *4: Except the efficiency of FL inverter
IFL =6.0mA(rms)
OPTICAL SPECIFICATION (Ta=25°C)
Item Min. Typ. Max.
Contrast Ratio
(CR)
250 450
---
Viewing Angle (Upper+Lower)
---
100
---
(CR ≥ 10)
(Left+Right)
---
120
---
Response Time
(tON)
---
8
---
(tOFF)
--- 17 ---
Luminance
(L)
Lamp Life Time (MTBF)*5 *6
320 400
50,000
---
*5 : Conditions ;Ta=25°C, IFL=6.0mA(rms), continuous lighting
*6 : Definitions of failure ; 1) Lcd luminance becomes half of the minimum value.
Unit Remarks
---
ms
ms
cd/m2
h
IFL=6.0mA(rms)
2) Lamp doesn’t light normally.
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by
Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by
implication or otherwise under any patent or patent rights of Toshiba Matsushita Display Technology or others.
*The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita
Display Technology before proceeding with the design of equipment incorporating this product.
(1/11)
2008-06-24 (Ver.0.8R)
1 Page  
DIMENSIONAL OUTLINE
TENTATIVE
LTA104D182F
Unit : mm
Standard tolerance : 0.5
(3/11)
2008-06-24 (Ver.0.8R)
3Pages 
TIMING SPECIFICATION 1) 2) 3) 4) 5) 6) 7)
LTA104D182F
<H-Sync/V-Sync+DE Mode>
Item
Frame Period
Vertical blanking Term
V-sync Pulse Width
Vertical Front Porch
Vertical Data Sync Period
Vertical Display Term
Horizontal Period
H-sync Pulse Width
Horizontal Front Porch
Horizontal Data Sync Period
Horizontal Display Term
Clock Period
Symbol
tv
tvblnk
tvw
tvfp
tvds
tvde
th
thw
thfp
thds
thde
tc
min.
608
---
8
2
2
6
600
850
26.4
8
8
16
800
25.0
typ.
625
17.78
25
---
---
---
600
1024
28.44
---
---
---
800
27.8
Max.
628
17.86
28
---
---
---
600
1056
---
---
---
---
800
---
unit
th
ms
th
th
th
th
th
tc
us
tc
tc
tc
tc
ns
< DE-Only Mode>
Item
Frame Period
Vertical Display Term
One Line Scanning Time
Horizontal Display Term
Clock Period
Symbol
t1
t2
t3
t4
tc
Min.
608
---
600 x t3
850 x tc
26.4
800 x tc
25.0
Typ.
625 x t3
17.78
600 x t3
1024 x tc
28.44
800 x tc
27.78
Max.
628 x t3
17.86
600 x t3
1056 x tc
---
800 x tc
---
Unit
---
ms
---
---
us
---
ns
Note 1) Refer to “Timing Chart” and LVDS (THC63LVDF84A) specifications by THine Electronics,Inc
Note 2) If NCLK is fixed to "H" or "L" level for certain period while DE is supplied, the panel may be damaged.
Note 3) If DE is fixed to “H” or “L” level for certain period while NCLK is supplied, the panel displays black with some flicker.
Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality.
There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving
condition (especially driving frequency), even if the condition satisfies above timing specifications.
Note 5) Do not make tv, th and tvds fluctuate.
Note 6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred.
Note 7) NCLK count of each Horizontal Scanning Time should be always the same.
V-Blanking period should be “n” X “Horizontal Scanning Time”. (n: integer)
Frame period should be always the same.
(6/11)
2008-06-24 (Ver.0.8R)
6 Page | |||
| ページ | 合計 : 11 ページ | ||
|
|
PDF ダウンロード | [ LTA104D182F datasheet.PDF ] | |
|
LTA104D182F データシートを活用すると、その部品の主な機能と仕様を詳しく理解できます。 ピン構成、電気的特性、動作パラメータ、性能を確認してください。 また、LTA104D182Fのさまざまなアプリケーション回路とユースケースを使用して独自の設計に統合する方法を理解するのに役立ちます。 |
共有リンク
Link :おすすめデータシート
|
あなたの検索基準に基づいて、興味のある他のデータシートを見つけました。同様の部品も一緒に検討することをお勧めします。 |
| 部品番号 | 部品説明 | メーカ |
| LTA104D182F | LCD Module | Toshiba |